prEN ISO 12643-4

Graphic technology - Safety requirements for graphic technology equipment and systems - Part 4: Converting equipment and systems (ISO/DIS 12643-4:2014)

This standard provides safety requirements for the design and construction of converting equipment used in the package printing, converting and graphic technology industries. It is applicable to converting equipment not covered by other parts of EN ISO 12643. It is intended to be used in conjunction with the general requirements given in EN ISO 12643-1.

Graphische Technik — Sicherheitsanforderungen an Ausrüstungen und Systeme der graphischen Technik — Teil 4: Ausrüstungen und Systeme der Papierverarbeitung (ISO/DIS 12643-4:2014)

Technologie graphique - Exigences de sécurité pour les systèmes et l'équipement de technologie graphique - Partie 4: Systèmes et équipement de façonnage (ISO/DIS 12643-4:2014)

Grafična tehnologija - Varnostne zahteve za grafično tehnološko opremo in sisteme - 4. del: Oprema in sistemi za predelavo, dodelavo in oplemenitenje (ISO/DIS 12643-4:2020).

General Information

• Status: Not Published
• Publication Date: 29-Feb-2016
• ICS: 37.100.10 - Reproduction equipment
• Technical Committee: CEN/TC 198 - Printing and paper machinery - Safety
• Drafting Committee: CEN/TC 198/WG 1 - Printing and paper converting machines - Drafting of safety standards
• Current Stage: 4098 - Decision to abandon - Enquiry
• Completion Date: 16-Jul-2015
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Ref Project: oSIST prEN ISO 12643-4:2020 - Graphic technology - Safety requirements for graphic technology equipment and systems - Part 4: Converting equipment and systems (ISO/DIS 12643-4:2020)

Relations

• Revised: EN 1010-4:2004+A1:2009 - Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines
• Effective Date: 26-Mar-2014

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2020
Grafična tehnologija - Varnostne zahteve za grafično tehnološko opremo in
sisteme - 4. del: Oprema in sistemi za predelavo in oplemenitenje (ISO/DIS 12643-
4:2020)
Graphic technology - Safety requirements for graphic technology equipment and
systems - Part 4: Converting equipment and systems (ISO/DIS 12643-4:2020)
Graphische Technik - Sicherheitsanforderungen an Ausrüstungen und Systeme der
graphischen Technik - Teil 4: Ausrüstungen und Systeme der Papierverarbeitung
(ISO/DIS 12643-4:2020)
Technologie graphique - Exigences de sécurité pour les systèmes et l'équipement de
technologie graphique - Partie 4: Systèmes et équipement de façonnage (ISO/DIS
12643-4:2020)
Ta slovenski standard je istoveten z: prEN ISO 12643-4
ICS:
37.100.10 Reprodukcijska oprema Reproduction equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT INTERNATIONAL STANDARD
ISO/DIS 12643-4
ISO/TC 130 Secretariat: SAC
Voting begins on: Voting terminates on:
2020-02-11 2020-05-05
Graphic technology — Safety requirements for graphic
technology equipment and systems —
Part 4:
Converting equipment and systems
Technologie graphique — Exigences de sécurité pour les systèmes et l'équipement de technologie
graphique —
Partie 4: Systèmes et équipement de façonnage
ICS: 37.100.10
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 12643-4:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020

ISO/DIS 12643-4:2020(E)
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: [phone]
Fax: [phone]
Email: [e-mail]
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved

ISO/DIS 12643-4:2020(E)
Contents Page
Foreword .viii
Introduction .x
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Significant hazards . 8
5 Equipment covered by this part of ISO 12643 . 8
5.1 General . 8
5.2 Machines used primarily in a converting operation . 8
5.3 Machines used in both printing and converting processes . 8
6 Machinery for the production of corrugated board . 9
6.1 All machines . 9
6.1.1 Emergency stop . 9
6.1.2 Control zones with stop/safe pushbuttons . 9
6.1.3 Steam pipes .10
6.2 Unwinding stations .10
6.2.1 General.10
6.2.2 Chucking cones and lifting arms .10
6.2.3 Braking systems.10
6.3 Splicers .10
6.3.1 Guarding hazard points .10
6.3.2 Dancer roller.10
6.3.3 Splicers .11
6.3.4 Knife .12
6.3.5 Pneumatic and hydraulic control systems .12
6.3.6 Frame edges .12
6.3.7 Splicers in elevated positions .12
6.3.8 Warning lights .12
6.4 Preheater .12
6.4.1 In-running nips .12
6.4.2 In-running nips between preheating cylinder and cross beams .13
6.4.3 Wrap roller and rotating arms .13
6.4.4 Hot surfaces.14
6.4.5 Walkways.14
6.5 Single facer .14
6.5.1 In-running nips .14
6.5.2 Corrugating rollers .15
6.5.3 Hazard points during roller change .15
6.5.4 In-running nip between pressure roller or pressing belt and corrugating roller 15
6.5.5 Belt breakage .16
6.5.6 Walkway .16
6.5.7 In-running nips between glue rollers .16
6.5.8 Hazard points between movable gluing unit and fixed machine parts .17
6.5.9 Moveable glue units . .17
6.5.10 Inclined belt conveyor .17
6.5.11 In-running nips between pulleys and fixed machine parts .18
6.5.12 Steam pipes .19
6.5.13 Warning signs .19
6.5.14 Noise enclosures .19
6.6 Bridge .19
6.6.1 Slots .19
6.6.2 Fall-off protection .19
ISO/DIS 12643-4:2020(E)
6.6.3 Access stairs .19
6.6.4 Passage height underneath the bridge .20
6.7 Braking and web aligning systems .20
6.8 Gluing machine .20
6.8.1 Steps and handles .20
6.8.2 Hazard points.20
6.8.3 Pressing device .20
6.9 Heating and pulling section .20
6.9.1 In-running nips .20
6.9.2 Hazard points.21
6.9.3 Heating plates .21
6.9.4 Preventing the weighting device from falling .
...