EN ISO 5457:1999/A1:2010

Technical product documentation - Sizes and layout of drawing sheets - Amendment 1 (ISO 5457:1999/Amd 1:2010)

Technische Produktdokumentation - Formate und Gestaltung von Zeichnungsvordrucken - Änderung 1 (ISO 5457:1999/Amd 1:2010)

Documentation technique de produits - Formats et présentation des éléments graphiques des feuilles de dessin - Amendement 1 (ISO 5457:1999/Amd 1:2010)

Tehnična dokumentacija izdelkov - Velikosti in ureditev risalnih listov - Dopolnilo 1 (ISO 5457:1999/Amd 1:2010)

Amandma A1:2010 je dodatek k standardu SIST EN ISO 5457:2002
Opredeljuje velikost in ureditev vnaprej tiskanih listov za tehnične risbe na kateremkoli področju projektiranja, vključno s tistimi, ki so ustvarjene z računalnikov. Uporablja se lahko tudi za druge tehnične dokumente.

General Information

• Status: Published
• Publication Date: 14-Jun-2010
• Withdrawal Date: 30-Dec-2010
• ICS: 01.100.01 - Technical drawings in general
• ICS: 01.110 - Technical product documentation
• ICS: 35.240.10 - Computer-aided design (CAD)
• Technical Committee: CEN/SS F01 - Technical drawings
• Drafting Committee: CEN/SS F01 - Technical drawings
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 15-Jun-2010
• Due Date: 13-Sep-2010
• Completion Date: 15-Jun-2010
• Ref Project: SIST EN ISO 5457:2002/Amd1:2010 - Technical product documentation - Sizes and layout of drawing sheets - Amendment 1 (ISO 5457:1999/Amd 1:2010)

Relations

• Amends: EN ISO 5457:1999 - Technical product documentation - Sizes and layout of drawing sheets (ISO 5457:1999)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
01-september-2010
7HKQLþQDGRNXPHQWDFLMDL]GHONRY9HOLNRVWLLQXUHGLWHYULVDOQLKOLVWRY'RSROQLOR
,62$PG
Technical product documentation - Sizes and layout of drawing sheets - Amendment 1
(ISO 5457:1999/Amd 1:2010)
Technische Produktdokumentation - Formate und Gestaltung von Zeichnungsvordrucken
- Änderung 1 (ISO 5457:1999/Amd 1:2010)
Documentation technique de produits - Formats et présentation des éléments
graphiques des feuilles de dessin - Amendement 1 (ISO 5457:1999/Amd 1:2010)
Ta slovenski standard je istoveten z: EN ISO 5457:1999/A1:2010
ICS:
01.100.01 7HKQLþQRULVDQMHQDVSORãQR Technical drawings in
general
01.110 7HKQLþQDGRNXPHQWDFLMD]D Technical product
L]GHONH documentation
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 5457:1999/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2010
ICS 01.100.01
English Version
Technical product documentation - Sizes and layout of drawing
sheets - Amendment 1 (ISO 5457:1999/Amd 1:2010)
Documentation technique de produits - Formats et Technische Produktdokumentation - Formate und
présentation des éléments graphiques des feuilles de Gestaltung von Zeichnungsvordrucken - Änderung 1 (ISO
dessin - Amendement 1 (ISO 5457:1999/Amd 1:2010) 5457:1999/Amd 1:2010)
This amendment A1 modifies the European Standard EN ISO 5457:1999; it was approved by CEN on 19 May 2010.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5457:1999/A1:2010: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
This document (EN ISO 5457:1999/A1:2010) has been prepared by Technical Committee ISO/TC 10
"Technical product documentation".
This Amendment to the European Standard EN ISO 5457:1999 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by December 2010, and
conflicting national standards shall be withdrawn at the latest by December 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 5457:1999/Amd 1:2010 has been approved by CEN as a EN ISO 5457:1999/A1:2010 without
any modification.
INTERNATIONAL ISO
STANDARD 5457
Second edition
1999-02-01
AMENDMENT 1
2010-06-15
Technical product documentation —
Sizes and layout of drawing sheets
AMENDMENT 1
Documentation technique de produits — Formats et présentation des
éléments graphiques des feuilles de dessin
AMENDEMENT 1
Reference number
ISO 5457:1999/Amd.1:2010(
...