Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of coarse foreign matter in reclaimed asphalt

This document (EN 12697-42:2005) specifies a visual method of determining the amount and components of coarse foreign matter in reclaimed asphalt. This method does not completely categorise the foreign matter that can occur in asphalt.
NOTE 1   For the use of reclaimed asphalt in asphalt mixtures, it is important to know the components in the reclaimed asphalt and to what extent coarse foreign matter is present that can influence the properties of the asphalt mix.
NOTE 2   The method is not intended to categorise all foreign materials but rather to ensure that the amount of coarse foreign materials are minimised.

Asphalt - Prüfverfahren für Heißasphalt - Teil 42: Fremdstoffgehalt in Ausbauasphalt

Diese Europäische Norm beschreibt das Prüfverfahren zur Bestimmung der Bestandteile und des Gehalts an Fremdstoffen in Ausbauasphalt.
ANMERKUNG   Für die Verwendung von Ausbauasphalt in Asphaltgemischen ist es wichtig zu wissen, welche Bestand-teile im Ausbauasphalt enthalten sind, und die Mengenanteile der Stoffe zu kennen, die die Eigenschaften des Asphalt-mischguts beeinflussen können.

Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné à chaud - Partie 42: Quantité de matériaux étrangers présents dans les agrégats d'enrobés

Le présent document (prEN 12697-42:2005) décrit une méthode d'essai visuelle  pour déterminer la quantité et les composants de matériaux étrangers grossiers contenus dans des agrégats d’enrobés.
NOTE 1   Afin d'utiliser les agrégats d'enrobés dans les mélanges bitumineux, il est important de connaître leurs composants et de savoir dans quelle proportion sont présents des éléments pouvant influer sur les propriétés du mélange bitumineux.
NOTE 2   Cette méthode n’est pas destinée à classer en catégories tous les matériaux étrangers mais pour s’assurer que la quantité de matériaux grossiers étrangers est minimisée.

Bitumenske zmesi – Preskusne metode za vroče asfaltne zmesi – 42. del: Vsebnost nečistoč pri ponovno uporabljenem asfaltu

General Information

Status
Withdrawn
Publication Date
22-Nov-2005
Withdrawal Date
27-Nov-2012
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
28-Nov-2012
Completion Date
28-Nov-2012

Relations

Buy Standard

Standard
EN 12697-42:2006
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12697-42:2006
01-april-2006
%LWXPHQVNH]PHVL±3UHVNXVQHPHWRGH]DYURþHDVIDOWQH]PHVL±GHO
9VHEQRVWQHþLVWRþSULSRQRYQRXSRUDEOMHQHPDVIDOWX
Bituminous mixtures - Test methods for hot mix asphalt - Part 42: Amount of coarse
foreign matter in reclaimed asphalt
Asphalt - Prüfverfahren für Heißasphalt - Teil 42: Fremdstoffgehalt in Ausbauasphalt
Mélanges bitumineux - Méthodes d'essai pour mélange hydrocarboné a chaud - Partie
42: Quantité de matériaux étrangers présents dans les agrégats d'enrobés
Ta slovenski standard je istoveten z: EN 12697-42:2005
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
SIST EN 12697-42:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12697-42:2006

---------------------- Page: 2 ----------------------

SIST EN 12697-42:2006
EUROPEAN STANDARD
EN 12697-42
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2005
ICS 93.080.20

English Version
Bituminous mixtures - Test methods for hot mix asphalt - Part
42: Amount of coarse foreign matter in reclaimed asphalt
Mélanges bitumineux - Méthodes d'essai pour mélange Asphalt - Prüfverfahren für Heißasphalt - Teil 42:
hydrocarboné à chaud - Partie 42: Quantité de matériaux Fremdstoffgehalt in Ausbauasphalt
étrangers présents dans les agrégats d'enrobés
This European Standard was approved by CEN on 30 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12697-42:2005: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 12697-42:2006
EN 12697-42:2005 (E)
Content Page
Foreword .3
1 Scope.6
2 Normative references.6
3 Terms and definitions.6
4 Principle.6
5 Apparatus.7
6 Preparation of the sample .7
7 Procedure.7
8 Expression of results.8
9 Test report.8
10 Precision data.8

2

---------------------- Page: 4 ----------------------

SIST EN 12697-42:2006
EN 12697-42:2005 (E)
Foreword
This document (EN 12697-42:2005) has been prepared by Technical Committee CEN/TC 227 “Road
materials”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by May 2006, and confl
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.