EN 13880-11:2026
(Main)Hot applied joint sealants - Part 11: Method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements
General Information
- Abstract
This document specifies a method for preparing asphalt test blocks intended for testing of hot applied joint sealants according to EN 13880 7 and EN 13880 9.
- Status
- Published
- Publication Date
- 24-Mar-2026
- Technical Committee
- CEN/TC 227 - Road materials
- Current Stage
- 6060 - Definitive text made available (DAV) - Publishing
- Start Date
- 25-Mar-2026
- Due Date
- 06-Mar-2026
- Completion Date
- 25-Mar-2026
Overview
EN 13880-11:2026 is a European Standard developed by the European Committee for Standardization (CEN) that specifies a test method for the preparation of asphalt test blocks. These test blocks are essential for evaluating hot applied joint sealants, particularly for function tests and determination of compatibility with asphalt pavements as outlined in EN 13880-7 and EN 13880-9. By standardizing the preparation process, this document enables consistent, reproducible testing while enhancing the reliability of results for road construction and maintenance professionals. The revised 2026 edition incorporates technical clarifications and updated guidance for preparing both laboratory-mixed and plant-sourced asphalt.
Key Topics
- Asphalt Block Preparation: Describes the method for heating, mixing, and compacting asphalt into blocks suitable for further testing. Asphalt may be prepared in the laboratory per EN 12697-35 or taken directly from an asphalt plant.
- Compaction Procedures: Outlines the use of standardized compaction equipment (EN 12697-32), ensuring uniform density and air void content (between 2% and 4%).
- Dimensional Specifications: Specifies required specimen dimensions for different tests, including function and compatibility evaluations.
- Storage Requirements: Stresses the importance of storing prepared asphalt blocks at -2°C to -4°C to maintain sample integrity prior to testing.
- Reporting Protocols: Details the data to be recorded during preparation, including mix composition, aggregate size distribution, production dates, and laboratory information.
Applications
The standardized preparation of asphalt test blocks according to EN 13880-11:2026 supports a wide range of practical applications in the field of road construction and maintenance:
- Performance Assessment of Joint Sealants: Provides a uniform substrate for function testing (EN 13880-7), ensuring that sealants are evaluated against consistent asphalt surfaces.
- Compatibility Testing: Confirms whether hot applied joint sealants are compatible with various asphalt pavement compositions as required by EN 13880-9.
- Quality Assurance: Supports laboratory and plant operations by providing a robust procedure for preparing and documenting asphalt test blocks, enabling traceability and compliance with regulatory requirements.
- Comparative Analysis: Facilitates the benchmarking and approval of sealing materials used in the construction and maintenance of roadways, airfields, and other trafficked areas.
Related Standards
EN 13880-11:2026 is part of a comprehensive series addressing hot applied joint sealants and related testing processes for road construction. Key related standards include:
- EN 13880-7: Function testing of joint sealants
- EN 13880-9: Determination of compatibility with asphalt pavements
- EN 12697-32: Specimen preparation by vibratory compactor
- EN 12697-35: Laboratory mixing methods for bituminous mixtures
- EN 13043: Aggregates for bituminous mixtures and surface treatments
- EN 12591: Specifications for paving grade bitumens
- EN 13880 Series (Parts 1-13): Covers additional properties and test methods for hot applied joint sealants
By ensuring thorough, standardized preparation of asphalt blocks, EN 13880-11:2026 strengthens the foundation for accurate sealant performance evaluations, supporting durable, high-quality road infrastructure across Europe.
Relations
- Effective Date
- 29-Nov-2023
- Effective Date
- 08-Apr-2026
- Effective Date
- 08-Apr-2026
- Effective Date
- 08-Apr-2026
- Effective Date
- 08-Apr-2026
- Effective Date
- 08-Apr-2026
- Effective Date
- 08-Apr-2026
- Effective Date
- 08-Apr-2026
- Effective Date
- 08-Apr-2026
- Referred By
EN 13880-7:2003 - Hot applied joint sealants - Part 7: Function testing of joint sealants - Effective Date
- 01-Apr-2026
- Referred By
EN 13880-7:2019 - Hot applied joint sealants - Part 7: Function testing of joint sealants - Effective Date
- 01-Apr-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
Zavod za gradbeništvo Slovenije (ZAG) - Inšpekcija
ZAG inspection body for construction products, structures, and materials.
Sponsored listings
Frequently Asked Questions
EN 13880-11:2026 is a standard published by the European Committee for Standardization (CEN). Its full title is "Hot applied joint sealants - Part 11: Method for the preparation of asphalt test blocks used in the function test and for the determination of compatibility with asphalt pavements". This standard covers: This document specifies a method for preparing asphalt test blocks intended for testing of hot applied joint sealants according to EN 13880 7 and EN 13880 9.
This document specifies a method for preparing asphalt test blocks intended for testing of hot applied joint sealants according to EN 13880 7 and EN 13880 9.
EN 13880-11:2026 is classified under the following ICS (International Classification for Standards) categories: 93.080.20 - Road construction materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13880-11:2026 has the following relationships with other standards: It is inter standard links to EN 13880-11:2003, EN 12697-33:2019+A1:2022, EN 12697-32:2019, EN 13108-1:2016, EN 13043:2013, EN 13880-9:2003, EN 12591:2009, EN 13043:2002, EN 12697-35:2025, EN 13880-7:2003, EN 13880-7:2019, EN ISO 11812:2024, EN ISO 10240:2024, EN ISO 15085:2024. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13880-11:2026 is associated with the following European legislation: EU Directives/Regulations: 305/2011. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 13880-11:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2026
Nadomešča:
SIST EN 13880-11:2004
Toplo nanosljive tesnilne mase za stike – 11. del: Metoda za pripravo preskusnih
asfaltnih blokov za preskuse funkcionalnosti in za ugotavljanje združljivosti z
asfaltnimi vozišči
Hot applied joint sealants - Part 11: Method for the preparation of asphalt test blocks
used in the function test and for the determination of compatibility with asphalt
pavements
Heiß verarbeitbare Fugenmassen - Teil 11: Prüfverfahren zur Herstellung von Asphalt-
Probekörpern zur Verwendung in der Funktionsprüfung und zur Bestimmung der
Verträglichkeit mit Asphalten
Produits de scellement de joints appliqués à chaud - Partie 11 : Méthode d'essai pour la
préparation des blocs d'enrobés destinés au test fonctionnel et pour la détermination de
compatibilité avec les revêtements bitumineux
Ta slovenski standard je istoveten z: EN 13880-11:2026
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
93.080.20 Materiali za gradnjo cest Road construction materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 13880-11
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2026
EUROPÄISCHE NORM
ICS 93.080.20 Supersedes EN 13880-11:2003
English Version
Hot applied joint sealants - Part 11: Method for the
preparation of asphalt test blocks used in the function test
and for the determination of compatibility with asphalt
pavements
Produits de scellement de joints appliqués à chaud - Heiß verarbeitbare Fugenmassen - Teil 11: Verfahren
Partie 11 : Méthode d'essai pour la préparation des zur Herstellung von Asphalt-Probekörpern zur
blocs d'enrobés destinés au test fonctionnel et pour la Verwendung in der Funktionsprüfung und zur
détermination de compatibilité avec les revêtements Bestimmung der Verträglichkeit mit Asphalten
bitumineux
This European Standard was approved by CEN on 9 February 2026.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13880-11:2026 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Principle . 5
5 Apparatus . 6
6 Asphalt material . 6
7 Preparation and conditioning of asphalt material . 6
8 Preparation of asphalt material for compaction . 6
9 Preparation of the asphalt test blocks . 7
10 Storage . 7
11 Report for asphalt blocks preparing . 7
European foreword
This document (EN 13880-11:2026) has been prepared by Technical Committee CEN/TC 227 “Road
materials”, the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2026, and conflicting national standards shall
be withdrawn at the latest by September 2026.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 13880-11:2003.
EN 13880-11:2003:
— the major changes are the introduction of asphalt material specifications according to EN 13108-1
and the alternative compaction rules according to EN 12697-32 or EN 12697-33.
— revision of Clause 6 Asphalt, clarifying the asphalt mix type and mixture recipe for the preparation of
hot mixed asphalt test specimen (from laboratory or from an asphalt plant) for joint sealant tests was
implemented.
The EN 13880 series, under the general title Hot applied joint sealants, consists of the following parts:
— Part 1: Test method for the determination of density at 25 °C
— Part 2: Test method for the determination of cone penetration at 25 °C
— Part 3: Test method for the determination of penetration and recovery (resilience)
— Part 4: Test method for the characterization of heat resistance — Change in penetration value
— Part 5: Test method for the determination of flow resistance
— Part 6: Method for the preparation of samples for testing
— Part 7: Function testing of joint sealants
— Part 8: Test method for the determination of the change in weight of fuel resistance joint sea
...