EN 1965-1:2011
(Main)Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate
Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate
This European Standard describes a method to determine the ability of a liquid adhesive to corrode a copper substrate under heat ageing conditions. Temperatures and ageing periods are chosen to ensure the maximum differentiation between the corrosivity of different adhesives and are not intended to represent any particular service condition.
Strukturklebstoffe - Korrosion - Teil 1: Bestimmung und Klassifikation der Korrosion eines Kupfermaterials
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Fähigkeit eines flüssigen Klebstoffes fest, um ein Kupfermaterial unter den Bedingungen einer Wärmealterung zu korrodieren. Die Temperaturen und die Zeitspannen der Alterung sind deshalb so gewählt, um eine maximale Unterscheidung zwischen der Korrosivität unterschiedlicher Klebstoffe sicherzustellen, und sollen nicht dazu dienen, unterschiedliche Anwendungsbedingungen nachzustellen.
Adhésifs structuraux - Corrosion - Partie 1: Détermination et classification de la corrosion d’un substrat en cuivre
La présente Norme européenne décrit une méthode permettant de déterminer l’aptitude d’un adhésif liquide à
corroder un substrat en cuivre dans des conditions de vieillissement à la chaleur. Les températures et les
périodes de vieillissement sont choisies de façon à différencier de manière optimale la corrosivité de plusieurs
adhésifs, elles ne sont pas destinées à représenter des conditions particulières d’utilisation.
Konstrukcijska lepila - Korozija - 1. del: Ugotavljanje in razvrstitev korozije na bakreni preskusni podlagi
Ta evropski standard opisuje metodo ugotavljanja zmožnosti tekočega lepila za korozijo na bakreni preskusni podlagi pod pogoji staranja zaradi vročine. Temperature in čas staranja so izbrani tako, da zagotavljajo maksimalno diferenciacijo med korozivnostjo različnih lepil in niso namenjeni predstavljanju katerega koli posebnega pogoja delovanja.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Konstrukcijska lepila - Korozija - 1. del: Ugotavljanje in razvrstitev korozije na bakreni preskusni podlagiStrukturklebstoffe - Korrosion - Teil 1: Bestimmung und Klassifikation der Korrosion eines KupfermaterialsAdhésifs structuraux - Corrosion - Partie 1 : Détermination et classification de la corrosion d’un substrat en cuivreStructural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate83.180LepilaAdhesives77.060Korozija kovinCorrosion of metalsICS:Ta slovenski standard je istoveten z:EN 1965-1:2011SIST EN 1965-1:2011en,de01-julij-2011SIST EN 1965-1:2011SLOVENSKI
STANDARDSIST EN 1965-1:20021DGRPHãþD
SIST EN 1965-1:2011
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1965-1
May 2011 ICS 77.060; 83.180 Supersedes EN 1965-1:2001English Version
Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate
Adhésifs structuraux - Corrosion - Partie 1: Détermination et classification de la corrosion d'un substrat en cuivre
Strukturklebstoffe - Korrosion - Teil 1: Bestimmung und Klassifikation der Korrosion eines Kupfermaterials This European Standard was approved by CEN on 10 March 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1965-1:2011: ESIST EN 1965-1:2011
EN 1965-1:2011 (E) 2 Contents Page Foreword .31 Scope .42 Normative references .43 Terms and definitions .44 Principle .45 Products and materials .46 Procedure .56.1 General .56.2 Preparation of the copper substrate .56.3 Determination .57 Discolouration/corrosion .68 Report .6 SIST EN 1965-1:2011
EN 1965-1:2011 (E) 3 Foreword This document (EN 1965-1:2011) has been prepared by Technical Committee CEN/TC 193 “Adhesives”, the secretariat of which is held by AENOR. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 2011, and conflicting national standards shall be withdrawn at the latest by November 2011. Attention is drawn
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.