iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 14902:2005/AC:2006

(Corrigendum)

Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter

Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter

TC - Modification to Equation 5

Außenluftbeschaffenheit - Standardisiertes Verfahren zur Bestimmung von Pb/Cd/As/Ni als Bestandteil der PM10 Fraktion des Schwebstaubes

Qualité de l'air ambiant - Méthode normalisée pour la mesure de Pb, Cd, As et Ni dans la fraction MP10 de la matière particulaire en suspension

Kakovost zunanjega zraka – Standardna metoda za določevanje Pb, Cd, As in Ni v frakciji PM10 lebdečih delcev – Popravek AC

General Information

Status
Published
Publication Date
17-Oct-2006
ICS
13.040.20 - Ambient atmospheres
Technical Committee
CEN/TC 264 - Air quality
Drafting Committee
CEN/TC 264/WG 14 - Reference method for determination of Pb/CdAs/Ni in ambient air
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
18-Oct-2006
Due Date
18-Oct-2006
Completion Date
18-Oct-2006
Directive
1999/30/EC - Limit values for sulphur dioxide, nitrogen dioxide and oxides of nitrogen, particulate matter and lead in ambient air
96/62/EC - Ambient air quality assessment and management
Mandate
M/258 - Standardization mandate to CEN and CENELEC for standard measuring methods of Pb, Cd, As, Ni in ambiant air
Ref Project
SIST EN 14902:2005/AC:2007 - Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter

Relations

Corrects
EN 14902:2005 - Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matter
Effective Date
22-Dec-2008

Buy Standard

EN 14902:2005/AC:2007EN 14902:2005/AC:2007
PreviousNext
Corrigendum
EN 14902:2005/AC:2007
English, French and German language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Ambient air quality - Standard method for the measurement of Pb, Cd, As and Ni in the PM10 fraction of suspended particulate matterQualité de l'air ambiant - Méthode normalisée pour la mesure de Pb, Cd, As et Ni dans la fraction MP10 de la matiere particulaire en suspensionAußenluftbeschaffenheit - Standardisiertes Verfahren zur Bestimmung von Pb/Cd/As/Ni als Bestandteil der PM10 Fraktion des SchwebstaubesTa slovenski standard je istoveten z:EN 14902:2005/AC:2006SIST EN 14902:2005/AC:2007en,fr,de13.040.20Kakovost okoljskega zrakaAmbient atmospheresICS:SLOVENSKI
STANDARDSIST EN 14902:2005/AC:200701-januar-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14902:2005/ACOctober 2006Octobre 2006Oktober 2006ICS 13.040.20English versionVersion FrançaiseDeutsche FassungAmbient air quality - Standard method for the measurement of Pb, Cd, Asand Ni in the PM10 fraction of suspended particulate matterQualité de l'air ambiant - Méthodenormalisée pour la mesure de Pb, Cd, As etNi dans la fraction MP10 de la matièreparticulaire en suspensionAußenluftbeschaffenheit - StandardisiertesVerfahren zur Bestimmung vonPb/Cd/As/Ni als Bestandteil der PM10Fraktion des SchwebstaubesThi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 14212:2024(Main)
Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence
kSIST FprEN 14212:2024

This document specifies a continuous measurement method for the determination of the concentration of sulfur dioxide present in ambient air based on the ultraviolet fluorescence measuring principle. This document describes the performance characteristics and sets the relevant minimum criteria required to select an appropriate ultraviolet fluorescence analyser by means of type testing. It also includes the evaluation of the suitability of an analyser for use in a specific fixed site so as to meet the data quality requirements as specified in Annex I of Directive 2008/50/EC [1] and requirements during sampling, calibration and quality assurance for use.
The method is applicable to the determination of the mass concentration of sulphur dioxide present in ambient air up to 1000 µg/m3. This concentration range represents the certification range for sulfur dioxide for type testing.
NOTE 1   It is possible to use other ranges depending on the levels present in ambient air.
NOTE 2   When this document is used for purposes other than for measurements required by Directive 2008/50/EC, the ranges and uncertainty requirements possibly do not apply.
The method covers the determination of ambient air concentrations of sulfur dioxide in locations classified as rural areas, urban-background areas, and for sampling influenced by traffic or industrial sources.
The results are expressed in µg/m3 (at 20 °C and 101,3 kPa).
NOTE 3   1 000 µg/m3 of SO2 corresponds to 376 nmol/mol of SO2.
This document contains information for different groups of users.
Clause 5 to Clause 7 and Annex C and Annex D contain general information about the principles of sulfur dioxide measurement by ultraviolet fluorescence analyser and sampling equipment.
Clause 8 and Annex E are specifically directed towards test houses and laboratories that perform type testing of sulfur dioxide analysers. These sections contain information about:
—   type testing conditions, test procedures and test requirements;
—   analyser performance requirements;
—   evaluation of the type testing results;
—   evaluation of the uncertainty of the measurement results of the sulfur dioxide analyser based on the type testing results.
Clause 9 to Clause 11 and Annex F and Annex G are directed towards monitoring networks performing the practical measurements of sulfur dioxide in ambient air. These sections contain information about:
—   initial installation of the analyser in the monitoring network and acceptance testing;
—   ongoing quality assurance/quality control;
—   calculation and reporting of measurement results;
—   evaluation of the uncertainty of the measurement results under practical monitoring conditions.
This document represents an evolution of earlier editions (EN 14212:2005 and EN 14212:2012). It is advisable that when equipment is procured it complies fully with this document.
NOTE 4   Type testing performed prior to the publication of this document for the purpose of demonstrating equivalence are still valid.
NOTE 5   Analysers type tested prior to the publication of this document remain valid for use for regulated monitoring purposes.

  • Draft
    108 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14626:2024(Main)
Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy
kSIST FprEN 14626:2024

This European Standard specifies a continuous measurement method for the determination of the concentration of carbon monoxide present in ambient air based on the non-dispersive infrared spectroscopic measuring principle.
This standard describes the performance characteristics and sets the relevant minimum criteria required to select an appropriate non-dispersive infrared spectroscopic analyser by means of type approval tests. It also includes the evaluation of the suitability of an analyser for use in a specific fixed site so as to meet the data quality requirements as specified in Annex I of Directive 2008/50/EC [1] and requirements during sampling, calibration and quality assurance for use.
The method is applicable to the determination of the mass concentration of carbon monoxide present in ambient air up to 100 mg/m3 carbon monoxide. This concentration range represents the certification range for the type approval test.
NOTE 1 Other ranges may be used depending on the levels present in ambient air.
NOTE 2 When the standard is used for other purposes than for measurements required by Directive 2008/50/EC, the ranges and uncertainty requirements may not apply.
The method covers the determination of ambient air concentrations of carbon monoxide in zones classified as rural areas, urban-background areas and traffic-orientated locations and locations influenced by industrial sources.
The results are expressed in mg/m3 (at 20 °C and 101,3 kPa).
NOTE 3 100 mg/m3 of CO corresponds to 86 μmol/mol of CO.
This standard contains information for different groups of users.
Clauses 5 to 7 and Annexes B, C and D contain general information about the principles of carbon monoxide measurement by non-dispersive infrared spectroscopic analyser and sampling equipment.
Clause 8 and Annex E are specifically directed towards test houses and laboratories that perform type-approval testing of carbon monoxide analysers. These sections contain information about:
− type-approval test conditions, test procedures and test requirements;
− analyser performance requirements;
− evaluation of the type-approval test results;
− evaluation of the uncertainty of the measurement results of the carbon monoxide analyser based on the type approval test results.
Clauses 9 to 11 and Annex F are directed towards monitoring networks performing the practical measurements of carbon monoxide in ambient air. These sections contain information about:
− initial installation of the analyser in the monitoring network and acceptance testing;
− ongoing quality assurance/quality control;
− calculation and reporting of measurement results;
− evaluation of the uncertainty of measurement results under practical monitoring conditions.

  • Draft
    99 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14211:2024(Main)
Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence
kSIST FprEN 14211:2024

This document specifies a continuous measurement method for the determination of the concentrations of nitrogen dioxide and nitrogen monoxide present in ambient air based on the chemiluminescence measuring principle. This document describes the performance characteristics and sets the relevant minimum criteria required to select an appropriate chemiluminescence analyser by means of type testing. It also includes the evaluation of the suitability of an analyser for use in a specific fixed site so as to meet the data quality requirements as specified in Annex I of Directive 2008/50/EC [1] and requirements during sampling, calibration and quality assurance for use.
The method is applicable to the determination of the concentration of nitrogen dioxide present in ambient air up to 500 µg/m3. This concentration range represents the certification range for nitrogen dioxide for type testing.
The method is applicable to the determination of the concentration of nitrogen monoxide present in ambient air up to 1 200 µg/m3. This concentration range represents the certification range for nitrogen monoxide for the type testing.
NOTE 1   It is possible to use other ranges depending on the levels present in ambient air.
NOTE 2   When this document is used for purposes other than for measurements required by Directive2008/50/EC, the ranges and uncertainty requirements possibly do not apply.
The method covers the determination of ambient air concentrations of nitrogen dioxide and nitrogen monoxide in zones classified as rural areas, urban-background areas, traffic-orientated locations and locations influenced by industrial sources.
The results are expressed in µg/m3 (at 20 °C and 101,3 kPa).
NOTE 3   500 µg/m3 of nitrogen dioxide corresponds to 261 nmol/mol of nitrogen dioxide at 20 °C and 101,3 kPa. 1 200 µg/m3 of nitrogen monoxide corresponds to 962 nmol/mol of nitrogen monoxide at 20 °C and 101,3 kPa.
This document contains information for different groups of users.
Clause 5 to Clause 7 and Annex B and Annex C contain general information about the principles of NOx measurement by chemiluminescence analyser and sampling equipment.
Clause 8 and Annex E are specifically directed towards test houses and laboratories that perform type testing of NOx analysers. These sections contain information about:
—   type testing conditions, test procedures and test requirements;
—   analyser performance requirements;
—   evaluation of the type testing results;
—   evaluation of the uncertainty of the measurement results of the NOx analyser based on the type testing results.
Clause 9 to Clause 11 and Annex F and Annex G are directed towards monitoring networks performing the practical measurements of NOx in ambient air. These sections contain information about:
—   initial installation of the analyser in the monitoring network and acceptance testing;
—   ongoing quality assurance/quality control;
—   calculation and reporting of measurement results;
—   evaluation of the uncertainty of measurement results under practical monitoring conditions.
This document represents an evolution of earlier editions (EN 14211:2005 and EN 14211:2012). It is advisable that when equipment is procured it complies fully with this document.
NOTE 4   Type testing performed prior to the publication of this document for the purpose of demonstrating equivalence are still valid.
NOTE 5   Analysers type tested prior to the publication of this document remain valid for use for regulated monitoring purposes.

  • Draft
    104 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14625:2024(Main)
Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry
kSIST FprEN 14625:2024

This European Standard specifies a continuous measurement method for the determination of the concentrations of ozone present in ambient air based on the ultraviolet photometric measuring principle. This standard describes the performance characteristics and sets the relevant minimum criteria required to select an appropriate ultraviolet photometric analyser by means of type approval tests. It also includes the evaluation of the suitability of an analyser for use in a specific fixed site so as to meet the data quality requirements as specified in Annex I of Directive 2008/50/EC [1] and requirements during sampling, calibration and quality assurance for use.
The method is applicable to the determination of the concentration of ozone present in ambient air up to 500 μg/m3.
This concentration range represents the certification range for ozone for the type approval test.
NOTE 1 Other ranges may be used for measurement systems applied at rural locations monitoring ecosystems.
NOTE 2 When the standard is used for other purposes than Directive 2008/50/EC, the ranges and uncertainty requirements may not apply.
The method covers the determination of ambient air concentrations of ozone in zones classified as rural areas, urban and urban-background areas.
The results are expressed in μg/m3 (at 20 °C and 101,3 kPa).
NOTE 3 500 μg/m3 of O3 corresponds to 250 nmol/mol of O3 at 20 °C and 101,3 kPa.
This standard contains information for different groups of users.
Clauses 5 to 7 and Annexes B and C contain general information about the principles of ozone measurement by ultraviolet photometric analyser and sampling equipment.
Clause 8 and Annex E are specifically directed towards test houses and laboratories that perform type-approval testing of ozone analysers. These sections contain information about:
− type-approval test conditions, test procedures and test requirements;
− analyser performance requirements;
− evaluation of the type-approval test results;
− evaluation of the uncertainty of the measurement results of the ozone analyser based on the type-approval test results.
Clauses 9 to 11 and Annexes F and G are directed towards monitoring networks performing the practical
measurements of ozone in ambient air. These sections contain information about:
− initial installation of the analyser in the monitoring network and acceptance testing;
− ongoing quality assurance/quality control;
− calculation and reporting of measurement results;
− evaluation of the uncertainty of measurement results under practical monitoring conditions.

  • Draft
    110 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 17660-2:2024(Main)
Air quality - Performance evaluation of air quality sensor systems - Part 2: Particulate matter in ambient air
SIST-TS CEN/TS 17660-2:2025

This document specifies the general principles, including testing procedures and requirements, for the classification of performance of low-cost sensor systems for the monitoring of particulate matter in ambient air at fixed sites. The classification of sensor systems includes tests that are performed under prescribed conditions. It does not guarantee performance in locations that are different from the tests, variations in meteorological climate from the test programme or account for stability over time, which can only be assessed under ongoing quality control strategies.
The described procedure is applicable to the determination of the mass concentration of particulate matter. The pollutants that are considered in this document are PM10 and PM2,5 in the range of concentrations expected in ambient air.
This document provides a classification that is consistent with the requirements for indicative measurements and objective estimation defined in Directive 2008/50/EC. In addition, it provides a classification for applications (non-regulatory measurements) that require more relaxed performance criteria.
This document applies to sensor systems used as individual systems. It does not apply to sensor systems as part of a sensor network. However, for some applications (e.g. in cities) sensor systems are deployed as part of a sensor network. Annex A provides information on the use of sensor systems as nodes in a sensor network.

  • Technical specification
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 18073:2024(Main)
Ambient air - Determination of lung deposited surface area (LDSA) concentration using aerosol monitors based on diffusion charging
SIST-TS CEN/TS 18073:2025

This document specifies a process for the electrical diffusion charging of aerosols with subsequent measurement of particle charge. With the aid of this method, it is possible to determine the lung-deposited surface area (LDSA) concentration of particles in ambient air. Depending on the design of the electrical diffusion charger, the LDSA of particles in the size range of approximately 20 nm to approximately 300 nm is measurable.
Furthermore, this document specifies design criteria for LDSA measuring aerosol monitors as well as performance criteria and the associated test procedures. The performance criteria depend on the application and they are more stringent when the instrument is operated in an air quality monitoring station.
In the determination of the LDSA concentration, the share of geometric particle surface area concentration is determined that can be deposited in the alveolar region of the human lung. Typical particle surface area concentrations with alveolar deposition measured in urban areas range from 5 µm2/cm3 to 50 µm2/cm3.
Instruments based on this measurement principle can be designed to be very compact with a low power consumption. This makes them ideally suited for handheld measurements, other forms of mobile application or to measure personal exposure. On the other hand, they can be easily adapted to serve as a stationary instrument in air quality monitoring stations.

  • Technical specification
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 18044:2024(Main)
Ambient air - Determination of the concentration of levoglucosan - Chromatographic method
SIST-TS CEN/TS 18044:2024

This document specifies a chromatographic method for the determination of levoglucosan in aqueous or organic extracts of filter samples collected in accordance with EN 12341:2023 [5]. The method has been tested for concentrations of ca. 10 ng/m3 up to ca. 3 000 ng/m3 with a sampling duration of 24 h. The procedure is also suitable for the determination of galactosan and mannosan.
Depending on the analysis instrumentation used, the carbohydrates inositol, glycerol, threitol/erythritol, xylitol, arabitol, sorbitol, mannitol, threalose, mannose, glucose, galactose and fructose can also be determined. However, no performance characteristics are given for these compounds in this document.

  • Technical specification
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16976:2024(Main)
Ambient air - Determination of the particle number concentration of atmospheric aerosol
SIST EN 16976:2024

This document specifies a standard method for determining the particle number concentration in ambient air in a range up to about 107 cm–3 for averaging times equal to or larger than 1 min. The standard method is based on a Condensation Particle Counter (CPC) operated in the counting mode and an appropriate dilution system for concentrations exceeding the counting mode range. It also defines the performance characteristics and the minimum requirements of the instruments to be used. The lower and upper sizes considered within this document are 10 nm and a few micrometres, respectively. This document gives guidance on sampling, operation, data processing and QA/QC procedures including calibration parameters.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 18076:2024(Main)
Ambient air - Equivalence of automatic measurements of elemental carbon (EC) and organic carbon (OC) in PM
SIST-TP CEN/TR 18076:2024

This document provides definitions of the quantities measured by various candidate methods, their basic principles, and their advantages and disadvantages.
Currently no traceable primary reference materials are available for EC and OC analyses. This document provides guidance to test the equivalence between candidate methods and EN 16909 for EC and/or OC determination(s), based on EN 16450.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16000-9:2024(Main)
Indoor air - Part 9: Determination of the emission of volatile organic compounds from samples of building products and furnishing - Emission test chamber method (ISO 16000-9:2024)
SIST EN ISO 16000-9:2024

This document specifies a general laboratory test method for the determination of the area specific emission rate of volatile organic compounds (VOCs) from samples of newly produced building products or furnishing under defined climate conditions. The method can also, in principle, be applied to samples of aged products. The emission data obtained can be used to calculate concentrations in a model room (see Table B.1).
This document is applicable to various emission test chambers used for the determination of the emission of VOCs from building products or furnishing.
This document is also applicable to samples of wood-based panels and other building products, in order to determine the emission rate of formaldehyde.
NOTE            In principle, this document can be applied to the study of any gas phase emissions from samples of building products and furnishing.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day