iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 12326-2:2000/A1:2004

(Amendment)

Slate and stone products for discontinuous roofing and cladding - Main element - Part 2: Methods of test

Slate and stone products for discontinuous roofing and cladding - Main element - Part 2: Methods of test

This part of EN 12326 specifies test methods for roofing and wall cladding slates and other stones. It is applicable to natural roofing products as defined in TC128 WI 00128032 used for assembly into discontinuous roofs and wall cladding.

Schiefer und andere Natursteinprodukte für überlappende Dachdeckungen und Außenwandbekleidungen - Teil 2: Prüfverfahren

Ardoises et éléments en pierre pour toiture et bardage pour pose en discontinu - Partie 2: Méthodes d'essais

Skrilavec in drugi izdelki iz naravnega kamna za polaganje streh in zidov - 2. del: Preskusne metode

General Information

Status
Withdrawn
Publication Date
13-Jul-2004
Withdrawal Date
14-Jun-2011
ICS
91.100.15 - Mineral materials and products
Technical Committee
CEN/TC 128 - Roof covering products for discontinuous laying and products for wall cladding
Drafting Committee
CEN/TC 128/SC 8 - Slate and stone products for roofing
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
15-Jun-2011
Completion Date
15-Jun-2011
Ref Project
SIST EN 12326-2:2000/A1:2004 - Slate and stone products for discontinuous roofing and cladding - Main element - Part 2: Methods of test

Relations

Replaced By
EN 12326-2:2011 - Slate and stone for discontinuous roofing and external cladding - Part 2: Methods of test for slate and carbonate slate
Effective Date
02-Jul-2011
Amends
EN 12326-2:2000 - Slate and stone products for discontinuous roofing and cladding - Part 2: Methods of test
Effective Date
08-Jun-2022

Buy Standard

EN 12326-2:2000/A1:2004EN 12326-2:2000/A1:2004
PreviousNext
Amendment
EN 12326-2:2000/A1:2004
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-december-2004
Skrilavec in drugi izdelki iz naravnega kamna za polaganje streh in zidov - 2. del:
Preskusne metode
Slate and stone products for discontinuous roofing and cladding - Main element - Part 2:
Methods of test
Schiefer und andere Natursteinprodukte für überlappende Dachdeckungen und
Außenwandbekleidungen - Teil 2: Prüfverfahren
Ardoises et éléments en pierre pour toiture et bardage pour pose en discontinu - Partie
2: Méthodes d'essais
Ta slovenski standard je istoveten z: EN 12326-2:2000/A1:2004
ICS:
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
2003-01.Slo
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 12326-1:2014(Main)
Slate and stone for discontinuous roofing and external cladding - Part 1: Specifications for slate and carbonate slate
SIST EN 12326-1:2014

This European Standard specifies requirements for slate and carbonate slate for discontinuous roofing and external cladding, as defined in 3.1, and 3.2, used for assembly into discontinuous roofing and external cladding.
For the purposes of this European Standard, slates and carbonate slates have been classified.
This European Standard does not apply to products for roofing or external cladding made from the following:
a)   stone other than those defined in 3.1 and 3.2;
b)   concrete;
c)   polymeric materials;
d)   fibre reinforced cement;
e)   metal;
f)   clay.
This European Standard is not applicable to roofing and cladding slates used internally.
This European Standard is not applicable to bonded cladding (cladding fixed with adhesives) and cladding fixed with dowels and cramps.
NOTE 1   Requirements for internal wall lining slate are specified in EN 1469.
This document does not include requirements for appearance.
NOTE 2   Some general guidance for appearance is given in Annex A.
This European Standard does not include installation rules for slates.
NOTE 3   References to national recommendations on methods of construction for slate roofs are given in Annex C.
NOTE 4   Where the term "slate" is used in this document it means slate and carbonate slate unless otherwise indicated.

  • Standard
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12326-2:2011(Main)
Slate and stone for discontinuous roofing and external cladding - Part 2: Methods of test for slate and carbonate slate
SIST EN 12326-2:2011

This European Standard specifies test methods for slate and carbonate slate for roofing and wall cladding. It is applicable to natural roofing products as defined in EN 12326-1 used for assembly into discontinuous roofs and external wall cladding.
NOTE   Where the term "slate" is used in this document it means slate and carbonate slate unless otherwise indicated.

  • Standard
    46 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 12326-2(Main)
Slate and stone for discontinuous roofing and external cladding - Part 2: Test methods
oSIST prEN 12326-2:2024

This document specifies test methods for slate, carbonate slate, schist and schistose stone for discontinuous roofing and external cladding, as defined in 3.1, 3.2, and 3.3 of EN 12326-1:2014 and 3.1 of prEN 12326-3:2021, used for assembly into discontinuous roofs and external wall cladding. In this sense, when the test describes a slate, it could also be considered as carbonate slate.

  • Draft
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 12326-3(Main)
Schist and schistose stone types for discontinuous roofing - Requirements and test methods.
oSIST prEN 12326-3:2021

This European standard specifies the performance requirements and corresponding test methods for roofing slate products of schist and schistose stone types as defined in 3.2 and 3.3 and uses for assembly into discontinuous roofing.
This European standard provides also for the evaluation of conformity and for marking of the roofing slate products.
This European standard covers als characteristics that are of importance to the trade.
This European standard does not cover roofing slate and carboante slate, for mhich EN 12326-1 and EN 12326-2 applies. It does not cover treated roofing slates, for which prEN 12326-4 applies.
This European Standard is not apllicable to bonded cladding (cladding fixed with adhesives) and cladding fixed with dowels and cramps. In these cases EN 1469 applies.
The performance of a roof or wall constructed with these products depends not only on the properties of the product as required by this document, but also on the design, construction and performance of the roof or wall as a whole in relation to the environment and conditions in use. This standard does not cover installation or construction specific requirements.

  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15167-2:2024(Main)
Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Assessment and verification of constancy of performance
SIST EN 15167-2:2024

This document specifies the scheme for the assessment and verification of constancy of performance (AVCP) of ground granulated blast furnace slag, including certification of constancy of performance.
The document provides technical rules for the factory production control, further testing of samples taken at the manufacturing plant (autocontrol testing) and the assessment of the performance of the ground granulated blast furnace slag, initial inspection of the manufacturing plant and of the factory production control and audit testing of samples. It also provides rules for actions to be followed in the event of non-conformity and the requirement for depots.
This document is linked with the European Standard covering ground granulated blast furnace slag, i.e. EN 15167-1:2006.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1097-1:2023(Main)
Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
SIST EN 1097-1:2024

This document specifies the reference method used for type testing and in case of dispute, for determining the resistance to wear of coarse aggregates (main text) and aggregates for railway ballast (Annex A) by abrasion in the micro-Deval apparatus. Other methods can be used for other purposes, such as factory production control, provided that an appropriate working relationship with the relevant reference method has been established.
This document applies to natural, manufactured, recycled or lightweight (LWA) aggregates.
NOTE   This document does not apply to all types of LWA.
The reference test is performed with the addition of water. Annex B gives details of how the test can be performed without the addition of water.
Annex A specifies the method to determine the resistance to wear of aggregates for railway ballast without abrasive charge.
Annex C specifies the test performed with alternative narrow size fractions.
Annexes D and E specify methods for determining the wear of fine aggregates.
Precision data for the reference test method are given in Annex F.
Annex A is normative and Annexes B, C, D, E and F are informative.
WARNING – The use of this part of EN 1097 can involve hazardous materials, operations and equipment (such as dust, noise and heavy lifts). It does not purport to address all of the safety or environmental problems associated with its use. It is the responsibility of users of this document to take appropriate measures to ensure the safety and health of personnel and the environment prior to application of this document, and fulfil statutory and regulatory requirements for this purpose.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 933-6:2022(Main)
Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates
SIST EN 933-6:2023

This document specifies the reference method used for type testing, and in case of dispute, for determining the flow coefficient of coarse and fine aggregates. Other methods can be used for other purposes, such as factory production control, provided that an appropriate working relationship with the reference method has been established. Examples of advanced test methods can be found in the Bibliography.
This document applies to coarse aggregate of sizes between 4 mm and 20 mm and to fine aggregate of size up to 2 mm. It does not apply to lightweight aggregates.
NOTE 1   For coarse aggregates between 4 mm and 20 mm, the flow coefficient is linked with the percentage of crushed or broken surfaces of an aggregate and can therefore be used in association with the method specified in EN 933-5. Shape and surface texture characteristics also influence the result.
NOTE 2   Experience of this test has been generally limited to natural aggregates.
Examples of test data sheets are given in informative Annexes A and C.
Annex B (informative) contains precision data.
WARNING - The use of this part of EN 933 can involve hazardous materials, operations and equipment (such as dust, noise and heavy lifts). It does not purport to address all of the safety or environmental problems associated with its use. It is the responsibility of users of this document to take appropriate measures to ensure the safety and health of personnel and the environment prior to application of the standard, and fulfil statutory and regulatory requirements for this purpose.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1468:2022(Main)
Natural stone - Rough slabs - Requirements
SIST EN 1468:2022

This document specifies requirements for rough slabs of natural stone from which products for use in buildings or commemorative stones and other similar applications are made.
It does not cover artificially agglomerated stony material nor installation.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 933-5:2022(Main)
Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed particles in coarse and all-in natural aggregates
SIST EN 933-5:2023

This document specifies the reference method, used for type testing and in case of dispute, for the determination of the percentages of crushed particles, totally crushed particles and totally rounded particles in coarse and all-in natural aggregates. Other methods can be used for other purposes, such as factory production control, provided that an appropriate working relationship with the reference method has been established.
NOTE 1   Examples of advanced test methods can be found in the Bibliography.
This document applies to coarse aggregates comprising particles within size fraction 4/63 mm. It does not apply to lightweight aggregates.
NOTE 2   For coarse aggregate between 4 mm and 20 mm the percentages of crushed surfaces are linked to the flow coefficient and can therefore be used in association with the test method specified in EN 933 6.
Clause 7.1 specifies the procedure for test portions consisting of one size fraction and Clause 7.2 specifies the procedure for test portions consisting of two or more size fractions.
Guidance for the estimated mass of various size fractions with about 100 particles is given in informative Annex A.
Examples of application of the test procedure and an example of a test data sheet are given in informative Annexes B and C.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1097-7:2022(Main)
Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
SIST EN 1097-7:2023

This document specifies the reference method used for type testing and in cases of dispute for the determination of the particle density of filler by means of a pyknometer. For other purposes, in particular factory production control, other methods can be used provided that an appropriate working relationship with the reference method has been established.
NOTE   Methods for determination of particle density of aggregates are specified in EN 1097 6.
Annex A specifies the procedure for determination of the pyknometer volume. Annex B specifies the procedure for determination of the density of the liquid used to determine the particle density of the filler. Annexes A and B are normative.
WARNING — The use of this part of EN 1097 can involve hazardous materials, operations and equipment (such as liquids, dust, noise and heavy lifts). It does not purport to address all of the safety or environmental problems associated with its use. It is the responsibility of users of this document to take appropriate measures to ensure the safety and health of personnel and the environment prior to application of the standard, and fulfil statutory and regulatory requirements for this purpose.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day