EN ISO 19432:2006

Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements and testing (ISO 19432:2006)

This International Standard specifies safety requirements and their verification by testing for the design and construction of portable, hand-held, internal combustion engine driven, cut-off machines, intended to be used by a single operator in the cutting of construction materials, such as asphalt, concrete, stone and metal. It is applicable to those machines designed purposely for use with a rotating, bonded-abrasive and/or superabrasive (diamond) cut-off wheel having a maximum outside diameter of 406 mm, centre-mounted on, and driven by, a spindle shaft, where the top of the wheel rotates away from the operator (see Figure 1). This International Standard deals with all significant hazards related to the hand-held use of such machines (see Clause 4). It specifies methods for the elimination or reduction of hazards arising from their use, as well as the type of information on safe working practices to be provided with the machines. Cut-off machines designed in accordance with this International Standard are intended to be used by persons who have read and understood the safety requirements given in the "instruction handbook" and who use the appropriate personal protective equipment (PPE). Except for noise, environmental aspects are not considered by this International Standard; nor are cut-off wheel specifications given - for such specifications, see, for example, EN 12413 [1] and EN 13236 [2]. This International Standard is not applicable to machines manufactured before the date of its publication.

Baumaschinen und -ausrüstungen - Tragbare, handgeführte Trennschleifmaschinen mit Verbrennungsmotor - Sicherheit und Prüfverfahren (ISO 19432:2006)

Diese Internationale Norm legt Sicherheitsanforderungen und die Prüfung auf deren Einhaltung hinsichtlich der konstruktiven Gestaltung und des konstruktiven Aufbaus von tragbaren, handgeführten Trennschleif¬maschinen mit eingebautem Verbrennungsmotor für Einmannbetrieb fest, die zum Schneiden von Baumaterialien, wie z. B. Asphalt, Beton, Stein und Metall, bestimmt sind. Sie gilt für solche Trenn¬schleif¬maschinen, die be¬stimmungsgemäß für den Einsatz mit einer rotierenden Trennschleifscheibe mit einem maximalen Durch¬messer von 406 mm und mit Trennschleifkörpern aus gebundenen Schleifmitteln und/oder Schleifwerkzeugen mit Diamant- und CBN-Schleifmitteln vorgesehen sind, die mittig auf einer Spindelwelle montiert sind und von dieser angetrieben werden, wobei sich die Stirnseite der Trennschleifscheibe in einer vom Anwender abge¬wandten Richtung dreht (siehe Bild 1).
Diese Internationale Norm behandelt alle signifikanten Gefahren, die mit dem handgeführten Einsatz der¬artiger Maschinen verbunden sind (siehe Abschnitt 4). Sie legt Verfahren für die Beseitigung oder Verminderung von Gefährdungen, die sich aus deren Anwendung ergeben, sowie die Art von Informationen über sichere Arbeitsabläufe fest, die mit der Maschine bereitzustellen sind. Die nach dieser Internationalen Norm gestal¬teten Trennschleifmaschinen sind für den Einsatz durch Personen bestimmt, die die in der Betriebsanlei¬tung angegebenen Sicherheitsanforderungen gelesen und verstanden haben und die entsprechende persön¬liche Schutzausrüstung (PSA) verwenden.
Umweltaspekte, ausgenommen Beeinträchtigungen durch Geräusch, werden in dieser Internationalen Norm nicht behandelt, und es werden auch keine Spezifikationen für Trennschleifscheiben angegeben  siehe hier¬zu z. B. EN 12413 [1] und EN 13236 [2].
Diese Internationale Norm gilt nicht für Maschinen, die vor dem Veröffentlichungsdatum dieses Dokuments hergestellt wurden.

Machines et matériel pour la construction des bâtiments - Tronçonneuses à disques, portatives, à moteur à combustion interne - Exigences de sécurité et essais (ISO 19432:2006)

Stroji in oprema za gradnjo objektov – Prenosni ročni rezalniki z motorjem z notranjim zgorevanjem – Varnostne zahteve in preskušanje (ISO 19432:2006)

General Information

• Status: Withdrawn
• Publication Date: 14-Mar-2006
• Withdrawal Date: 22-Apr-2008
• ICS: 91.220 - Construction equipment
• Technical Committee: CEN/TC 151 - Construction equipment and building material machines - Safety
• Drafting Committee: CEN/TC 151/WG 6 - Machines and equipment to process building materials (portable, hand-guided, support-mounted, on rails or self-propelled) - Safety
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 23-Apr-2008
• Completion Date: 23-Apr-2008
• Directive: 98/37/EC - Machinery
• Mandate: M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
• Ref Project: SIST EN ISO 19432:2006 - Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements and testing (ISO 19432:2006)

Relations

• Replaces: EN 1454:1997 - Portable, hand-held, internal combustion cutting-off machines - Safety
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 19432:2008 - Building construction machinery and equipment - Portable, hand-held, internal combustion engine driven cut-off machines - Safety requirements and testing (ISO 19432:2006)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 19432:2006
01-september-2006
6WURMLLQRSUHPD]DJUDGQMRREMHNWRY±3UHQRVQLURþQLUH]DOQLNL]PRWRUMHP]
QRWUDQMLP]JRUHYDQMHP±9DUQRVWQH]DKWHYHLQSUHVNXãDQMH,62
Building construction machinery and equipment - Portable, hand-held, internal
combustion engine driven cut-off machines - Safety requirements and testing (ISO
19432:2006)
Baumaschinen und -ausrüstungen - Tragbare, handgeführte Trennschleifmaschinen mit
Verbrennungsmotor - Sicherheit und Prüfverfahren (ISO 19432:2006)
Machines et matériel pour la construction des bâtiments - Tronçonneuses a disques,
portatives, a moteur a combustion interne - Exigences de sécurité et essais (ISO
19432:2006)
Ta slovenski standard je istoveten z: EN ISO 19432:2006
ICS:
25.140.01 5RþQDRURGMDQDVSORãQR Hand-held tools in general
91.220 Gradbena oprema Construction equipment
SIST EN ISO 19432:2006 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 19432
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2006
ICS 91.220 Supersedes EN 1454:1997
English Version
Building construction machinery and equipment - Portable,
hand-held, internal combustion engine driven cut-off machines -
Safety requirements and testing (ISO 19432:2006)
Machines et matériel pour la construction des bâtiments - Baumaschinen und -ausrüstungen - Tragbare,
Tronçonneuses à disques, portatives, à moteur à handgeführte Trennschleifmaschinen mit
combustion interne - Exigences de sécurité et essais (ISO Verbrennungsmotor - Sicherheit und Prüfverfahren (ISO
19432:2006) 19432:2006)
This European Standard was approved by CEN on 9 March 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19432:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 19432:2006 (E)





Foreword


This document (EN ISO 19432:2006) has been prepared by Technical Committee ISO/TC 195
"Building construction machinery and equipment" in collaboration with Technical Committee
CEN/TC 151 "Construction equipment and building material machines - Safety", the secretariat of
which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2006, and conflicting national
standards shall be withdrawn at the latest by September 2006.

This document supersedes EN 1454:1997.

This document has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).

For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 19432:2006 has been approved by CEN as EN ISO 19432:2006 without any
modifications.

2

---------------------- Page: 3 ----------------------

EN ISO 19432:2006 (E)



ANNEX ZA
(informative)

Relationship between this International Standard and the Essential
Requirements of EU Directive 98/37/EC, amended by Directive

98/79/EC

This International Standard has been prepared under a mandate given to CEN by the European

Commiss
...