prEN ISO 16610-21
(Main)Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO/DIS 16610-21:2023)
Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters: Gaussian filters (ISO/DIS 16610-21:2023)
ISO 16610-21:2011 specifies the metrological characteristics of the Gaussian filter, for the filtration of profiles. It specifies, in particular, how to separate long and short wave components of a surface profile.
Geometrische Produktspezifikation (GPS) - Filterung - Teil 21: Lineare Profilfilter: Gauß-Filter (ISO/DIS 16610‑21:2023)
Spécification géométrique des produits (GPS) - Filtrage - Partie 21: Filtres de profil linéaires: Filtres gaussiens (ISO/DIS 16610-21:2023)
L'ISO 16610-21:2011 spécifie les caractéristiques métrologiques des filtres gaussiens utilisés pour le filtrage des profils. Elle spécifie notamment la façon de séparer les composantes de longueurs d'onde longue et courte d'un profil de surface.
Geometrične specifikacije izdelkov - Filtriranje - 21. del: Filtri linearnih profilov: Gaussovi filtri (ISO/DIS 16610-21:2023)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO 16610-21:2024
01-januar-2024
Nadomešča:
SIST EN ISO 16610-21:2012
Geometrične specifikacije izdelkov - Filtriranje - 21. del: Filtri linearnih profilov:
Gaussovi filtri (ISO/DIS 16610-21:2023)
Geometrical product specifications (GPS) - Filtration - Part 21: Linear profile filters:
Gaussian filters (ISO/DIS 16610-21:2023)
Geometrische Produktspezifikation (GPS) - Filterung - Teil 21: Lineare Profilfilter: Gauß-
Filter (ISO/DIS 16610-21:2023)
Spécification géométrique des produits (GPS) - Filtrage - Partie 21: Filtres de profil
linéaires: Filtres gaussiens (ISO/DIS 16610-21:2023)
Ta slovenski standard je istoveten z: prEN ISO 16610-21
ICS:
17.040.20 Lastnosti površin Properties of surfaces
17.040.40 Specifikacija geometrijskih Geometrical Product
veličin izdelka (GPS) Specification (GPS)
oSIST prEN ISO 16610-21:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 16610-21:2024
---------------------- Page: 2 ----------------------
oSIST prEN ISO 16610-21:2024
DRAFT INTERNATIONAL STANDARD
ISO/DIS 16610-21
ISO/TC 213 Secretariat: BSI
Voting begins on: Voting terminates on:
2023-10-31 2024-01-23
Geometrical product specifications (GPS) — Filtration —
Part 21:
Linear profile filters: Gaussian filters
Spécification géométrique des produits (GPS) — Filtrage —
Partie 21: Filtres de profil linéaires: Filtres gaussiens
ICS: 17.040.20; 17.040.40
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 16610-21:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 3 ----------------------
oSIST prEN ISO 16610-21:2024
ISO/DIS 16610-21:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 16610-21
ISO/TC 213 Secretariat: BSI
Voting begins on: Voting terminates on:
Geometrical product specifications (GPS) — Filtration —
Part 21:
Linear profile filters: Gaussian filters
Spécification géométrique des produits (GPS) — Filtrage —
Partie 21: Filtres de profil linéaires: Filtres gaussiens
ICS: 17.040.20; 17.040.40
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 16610-21:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
© ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023
---------------------- Page: 4 ----------------------
oSIST prEN ISO 16610-21:2024
ISO/DIS 16610-21:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.