iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 15715:2006

(Main)

Binders for paints and varnishes - Determination of turbidity (ISO 15715:2003)

Binders for paints and varnishes - Determination of turbidity (ISO 15715:2003)

ISO 15715:2003 specifies an instrumental method for determining the turbidity of clear liquids. It is applicable to resins and resin solutions, solvents, clear coating materials, monomers and any other liquids where clarity is specified.

Bindemittel für Beschichtungsstoffe - Bestimmung der Trübung (ISO 15715:2003)

Die Trübung von Flüssigkeiten kann visuell oder instrumentell gemessen werden, wobei visuelle Verfahren subjektiv sein können. Nach diesem Verfahren wird die Lichtstreuung an unlöslichen Teilchen in einer Flüssigkeit instrumentell gemessen, es handelt sich daher um eine objektive Bestimmung der Trübung.
Eine Trübung in Flüssigkeiten wird durch die Anwesenheit von unlöslichen Bestandteilen (z. B. sich nicht absetzendes Flokkulat, Gel oder andere suspendierte Bestandteile wie Teilchen oder Tropfen) verursacht. Im Falle von fein dispergierten unlöslichen Bestandteilen kann die Trübung durch Messen der Intensität des Lichtes, das in einem Strahl durch die Flüssigkeit geleitet und von den Teilchen gestreut wird, gemessen werden.
Diese Internationale Norm legt ein instrumentelles Verfahren zum Bestimmen der Trübung von klaren Flüssigkeiten fest. Sie ist anwendbar auf Harze und Harzlösungen, Lösemittel, Klarlacke, Monomere und alle anderen Flüssigkeiten, für die eine Klarheit festgelegt ist.

Liants pour peintures et vernis - Détermination de la turbidité (ISO 15715:2003)

L'ISO 15715:2003 spécifie une méthode instrumentale pour la détermination de la turbidité de liquides clairs. Elle s'applique aux résines et aux solutions de résine, aux solvants, aux revêtements transparents, aux monomères et à tout autre liquide dont la transparence est spécifiée.

Veziva za barve in lake – Ugotavljanje motnosti (ISO 15715:2003)

General Information

Status
Published
Publication Date
07-Feb-2006
Withdrawal Date
30-Aug-2006
ICS
87.060.20 - Binders
Technical Committee
CEN/TC 139 - Paints and varnishes
Drafting Committee
CEN/TC 139 - Paints and varnishes
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
08-Feb-2006
Due Date
12-Sep-2006
Completion Date
08-Feb-2006
Ref Project
SIST EN ISO 15715:2006 - Binders for paints and varnishes - Determination of turbidity (ISO 15715:2003)

Buy Standard

EN ISO 15715:2006EN ISO 15715:2006
PreviousNext
Standard
EN ISO 15715:2006
English language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 15715:2006
01-april-2006
Veziva za barve in lake – Ugotavljanje motnosti (ISO 15715:2003)
Binders for paints and varnishes - Determination of turbidity (ISO 15715:2003)
Bindemittel für Beschichtungsstoffe - Bestimmung der Trübung (ISO 15715:2003)
Liants pour peintures et vernis - Détermination de la turbidité (ISO 15715:2003)
Ta slovenski standard je istoveten z: EN ISO 15715:2006
ICS:
87.060.20 Veziva Binders
SIST EN ISO 15715:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 15715:2006

---------------------- Page: 2 ----------------------

SIST EN ISO 15715:2006

---------------------- Page: 3 ----------------------

SIST EN ISO 15715:2006

---------------------- Page:
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 7142:2023(Main)
Binders for paints and varnishes - Epoxy resins - General methods of test (ISO 7142:2023)
SIST EN ISO 7142:2023

This document specifies general methods of test for epoxy resins for use in paints, varnishes and similar products. It is also applicable to those solutions made from epoxy resins that are intended for use as binders for paints and varnishes.
The test methods described in this document are not intended for epoxy esters.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13885-1:2021(Main)
Gel permeation chromatography (GPC) - Part 1: Tetrahydrofuran (THF) as eluent (ISO 13885-1:2020)
SIST EN ISO 13885-1:2021

This document specifies the determination of the molar-mass distribution and the average molar mass values Mn (number average) and Mw (weight average) of polymers that are soluble in tetrahydrofuran (THF) by gel permeation chromatography (GPC).
NOTE    Also known as size exclusion chromatography (SEC).
Even though the chromatograms obtained show good repeatability, it is possible that this method cannot be used with certain polymer types because of specific interactions (e.g. adsorption) within the sample/eluent/column system.
The conditions specified in this document are not applicable to the GPC analysis of polymer samples with Mw values greater than 106 g/mol and/or of polymers with elution limits outside the calibration range (see 7.6 and Annex C).
This document includes no correction method (e.g. for the elimination of peak broadening. If absolute molar-mass values are required, an absolute method (e.g. membrane osmometry for Mn or light scattering for Mw) can be used.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13885-3:2021(Main)
Gel permeation chromatography (GPC) - Part 3: Water as eluent (ISO 13885-3:2020)
SIST EN ISO 13885-3:2021

This document specifies the determination of the molar-mass distribution and the average molar mass values Mn (number average) and Mw (weight average) of polymers that are soluble in water by gel permeation chromatography (GPC).
NOTE    Also known as size exclusion chromatography (SEC).
This method is applicable to neutral polymers and polyanions (e.g. polycarboxylates, polysaccharides, fully hydrolyzed polyvinyl alcohols and high-molecular polyethylene oxides). It is not applicable to polycations [e.g. polyvinylpyrrolidone, polyvinylpyridine, salts of poly(diallyl‑N,N‑dimethyl‑azacyclopentane), chitosan].
Despite good solubility in the mobile phase and even though the chromatograms obtained show good repeatability, it is possible that this method cannot be used with certain polymer types because of specific interactions (e.g. adsorption) within the sample/eluent/column system (see also Clause 12).
The conditions specified in this document are not applicable to the GPC analysis of polymer samples with Mw values greater than 106 g/mol and/or polymers with elution limits outside the calibration range (see 7.6 and Annex C).
This document includes no correction methods (e.g. for the elimination of peak broadening). If absolute molar mass values are required, an absolute method (e.g. membrane osmometry for Mn or light scattering for Mw) can be used.

  • Standard
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13885-2:2021(Main)
Gel permeation chromatography (GPC) - Part 2: N,N-Dimenthylacetamide (DMAC) as eluent (ISO 13885-2:2020)
SIST EN ISO 13885-2:2021

This document specifies the determination of the molar-mass distribution and the average molar mass values Mn (number average) and Mw (weight average) of polymers that are soluble in DMAC (N,N-Dimethylacetamide) by gel permeation chromatography (GPC).
NOTE    Also known as size exclusion chromatography (SEC).
Even though the chromatograms obtained show good repeatability, it is possible that this method cannot be used with certain polymer types because of specific interactions (e.g. adsorption) within the sample/eluent/column system.
The conditions specified in this document are not applicable to the GPC analysis of polymer samples with Mw values greater than 106 g/mol and/or polymers with elution limits outside the calibration range (see 7.6 and Annex C).
This document includes no correction method (e.g. for the elimination of peak broadening). If absolute molar mass values are required, an absolute method (e.g. membrane osmometry for Mn or light scattering for Mw) can be used.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 276:2021(Main)
Binders for paints and varnishes - Linseed stand oil - Requirements and methods of test (ISO 276:2019)
SIST EN ISO 276:2021

This document specifies the requirements and the corresponding test methods for five types of linseed stand oil suitable for paints and varnishes.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4629-3:2020(Main)
Binders for paints and varnishes - Determination of hydroxyl value - Part 3: Rapid test (ISO 4629-3:2018)
SIST EN ISO 4629-3:2020

This document specifies a titrimetric method for determining the hydroxyl groups in resins and binders for paints and varnishes.
This method is primarily suitable for neutral media. Acidic products provide higher values; neutral products provide, through neutralization of the acidic carbamates, lower values. For these products, preliminary tests are performed to ensure the applicability of the method.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4625-1:2020(Main)
Binders for paints and varnishes - Determination of softening point - Part 1: Ring-and-ball method (ISO 4625-1:2020)
SIST EN ISO 4625-1:2020

This document specifies the test methods for determining the softening point of resins (including rosin)
and similar materials by means of ring-and-ball apparatus.
Both manual and automated methods are specified, the automated method being the reference method.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3251:2019(Main)
Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2019)
SIST EN ISO 3251:2019

This document specifies a method for determining the non-volatile-matter content by mass of paints, varnishes, binders for paints and varnishes, polymer dispersions and condensation resins such as phenolic resins (resols, novolak solutions etc.).
The method is also applicable to formulated dispersions containing fillers, pigments and other auxiliaries (e.g. thickeners, film-forming agents).
NOTE 1    The non-volatile-matter content of a product is not an absolute quantity but depends upon the temperature and period of heating used for the determination. Consequently, when using this method, only relative and not true values for non-volatile-matter content are obtained owing to solvent retention, thermal decomposition and evaporation of low molecular mass constituents. The method is therefore primarily intended for testing different batches of the same type of product.
NOTE 2    This method is suitable for synthetic rubber lattices, provided heating for a specific period of time is considered appropriate (ISO 124 specifies heating until the loss in mass of a 2 g test portion following successive periods of heating is less than 0,5 mg).
NOTE 3    In-house methods for determining non-volatile matter often include drying with infrared or microwave radiation. Standardization of such methods is not possible, since they are not generally applicable. Several polymer compositions tend to decompose during such treatment and therefore give incorrect results.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 150:2018(Main)
Raw, refined and boiled linseed oil for paints and varnishes - Specifications and methods of test (ISO 150:2018)
SIST EN ISO 150:2019

This document specifies the requirements and the corresponding methods of test for raw, refined and boiled linseed oils for paints and varnishes.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3681:2018(Main)
Binders for paints and varnishes - Determination of saponification value - Titrimetric method (ISO 3681:2018)
SIST EN ISO 3681:2019

This document specifies a titrimetric method for determining the esterified-acid content in binders for paints and varnishes, free acids and acid anhydrides being necessarily included in the result obtained.
Because different binders vary in their resistance to saponification, this document is of limited applicability. If necessary, completeness of saponification can be checked by repeating the test under more severe conditions achieved by the use of longer saponification time, more concentrated potassium hydroxide solution, or a higher-boiling alcohol as solvent.
Annex A specifies a procedure suitable for binders that saponify with difficulty.
The method is not applicable to those materials that show further reaction with alkalis beyond normal saponification.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day