EN 1926:2006
(Main)Natural stone test methods - Determination of uniaxial compressive strength
Natural stone test methods - Determination of uniaxial compressive strength
This European standard specifies a method for determining the uniaxial compressive strength of natural stones.
Prüfverfahren für Naturstein - Bestimmung der einachsigen Druckfestigkeit
Diese Europäische Norm legt ein Verfahren für die Bestimmung der einachsigen Druckfestigkeit von
Naturstein fest.
Méthodes d'essai des pierres naturelles - Détermination de la résistance en compression uniaxiale
La présente Norme européenne spécifie une méthode de détermination de la résistance en compression uniaxiale des pierres naturelles.
Preskušanje naravnega kamna - Ugotavljanje enoosne tlačne trdnosti
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 1926:2007
01-marec-2007
1DGRPHãþD
SIST EN 1926:2000
3UHVNXãDQMHQDUDYQHJDNDPQD8JRWDYOMDQMHHQRRVQHWODþQHWUGQRVWL
Natural stone test methods - Determination of uniaxial compressive strength
Prüfverfahren für Naturstein - Bestimmung der einachsigen Druckfestigkeit
Méthodes d'essai des pierres naturelles - Détermination de la résistance en compression
uniaxiale
Ta slovenski standard je istoveten z: EN 1926:2006
ICS:
73.020 Rudarstvo in kamnolomsko Mining and quarrying
izkopavanje
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
SIST EN 1926:2007 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 1926
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2006
ICS 73.020; 91.100.15 Supersedes EN 1926:1999
English Version
Natural stone test methods - Determination of uniaxial
compressive strength
Méthodes d'essai des pierres naturelles - Détermination de Prüfverfahren für Naturstein - Bestimmung der einachsigen
la résistance à la compression uniaxiale Druckfestigkeit
This European Standard was approved by CEN on 9 November 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1926:2006: E
worldwide for CEN national Members.
---------------------- Page: 2 ----------------------
EN 1926:2006 (E)
Contents page
Foreword.3
1 Scope .4
2 Normative references .4
3 Principle.4
4 Terms and Definitions .4
5 Symbols .4
6 Apparatus .5
7 Preparation of specimens.5
7.1 Sampling.5
7.2 Test specimens.5
7.3 Surface preparation.5
7.3.1 General.5
7.3.2 Capping with mortar.6
7.4 Conditioning of specimen before testing.6
8 Procedure .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.