EN ISO 4288:1997
(Main)Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996)
Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996)
Specifies the rules for comparison of the measured values with the tolerance limits for surface texture parameters defined in ISO 4287, ISO 12085, ISO 13565-2 and ISO 13565-3. It also gives rules for measuring roughness profile parameters by using stylus instruments according to ISO 3274. Replaces the first edition.
Geometrische Produktspezifikationen (GPS) - Oberflächenbeschaffenheit: Tastschnittverfahren - Regeln und Verfahren für die Beurteilung der Oberflächenbeschaffenheit (ISO 4288:1996)
Diese Internationale Norm beschreibt Regeln für den Vergleich zwischen den gemessenen Werten und den Toleranzgrenzen für Oberflächenkenngrößen, die in ISO 4287, ISO 12085, ISO 13565-2 und ISO 13565-3 definiert sind. Sie legt außerdem die Auswahl der Grenzwellenlängen lc für die Messung von Kenngrößen am Rauheitsprofil nach ISO 4287 bei der Anwendung von Tastschnittgeräten nach ISO 3276 fest.
Spécification géométrique des produits (GPS) - Etat de surface: Méthode du profil - Règles et procédures pour l'évaluation de l'état de surface (ISO 4288:1996)
La présente Norme internationale prescrit les règles et les procédures pour la comparaison aux limites de tolérances des valeurs mesurées des paramètres d'état de surface définis dans l'ISO 4287, l'ISO 12085, l'ISO 13565-2 et l'ISO 13565-3. Elle prescrit également les conventions à retenir pour le choix de la longueur d'onde de coupure, λc, lors de la mesure des paramètres de rugosité conformément à l'ISO 4887 à l'aide d'appareils à contact (palpeur) conformément à l'ISO 3274.
Specifikacija geometrijskih veličin izdelka - Tekstura površine: profilna metoda - Pravila in postopki za ocenitev teksture površine (ISO 4288:1996)
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geometrische Produktspezifikationen (GPS) - Oberflächenbeschaffenheit: Tastschnittverfahren - Regeln und Verfahren für die Beurteilung der Oberflächenbeschaffenheit (ISO 4288:1996)Spécification géométrique des produits (GPS) - Etat de surface: Méthode du profil - Regles et procédures pour l'évaluation de l'état de surface (ISO 4288:1996)Geometrical product specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture (ISO 4288:1996)17.040.20Lastnosti površinProperties of surfacesICS:Ta slovenski standard je istoveten z:EN ISO 4288:1997SIST EN ISO 4288:2000en01-december-2000SIST EN ISO 4288:2000SLOVENSKI
STANDARD
SIST EN ISO 4288:2000
SIST EN ISO 4288:2000
SIST EN ISO 4288:2000
SIST EN ISO 4288:2000
SIST EN ISO 4288:2000
INTERNATIONAL STANDARD IS0 4288 Second edition 1996-08-01 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Rules and procedures for the assessment of surface texture Spkifica tion g6om&rique des produits (GPS) - ita t de surface: M&hode du profil- Regles et pro&dures pour I’baluation de Y&tat de surface Reference Number IS0 4288:1996(E) SIST EN ISO 4288:2000
IS0 4288:1996(E) Contents 1 2 3 4 4.1 4.2 4.3 4.4 5 5.1 5.2 5.3 5.4 6 6.1 6.2 7 7.1 7.2 Scope . Normative references . Definitions . Parameter estimation . Parameters defined over the sampling length . Parameters defined over the evaluation length . Curves and related parameters . Default evaluation lengths . Rules for comparison of the measured values with the tolerance limits . Areas on the feature to be inspected . The 16 % rule . The max.-rule . Uncertainty of measurement . Parameter evaluation . . General . Roughness profile parameters . Rules and procedures for inspection using stylus instruments . . Basic rules for the determination of cut-off wavelength for the measurement of roughness profile parameters . Measurement of roughness profile parameters . Page 1 1 1 2 2 2 2 2 2 2 2 3 3 3 3 3 4 4 4 0 IS0 1996 All rights reserved. Unless otherwise specified, no part of this publication may be repro- duced or utilized in any form or by any means, electronic or mechanical, including photo- copying and microfilm, without permission in writing from the publisher. International Organization for Standardization Case Postale 56 l CH-1211 Get-We 20 l Switzerland Printed in Switzerland SIST EN ISO 4288:2000
Q IS0 IS0 4288:1996(E) Annexes A Simplified procedure roughness inspection . 6 B Relation to GPS matrix model . 7 C Bibliography . 8 SIST EN ISO 4288:2000
IS0 4288: 1996(E) @ IS0 Foreword IS0 (the International Organization for Standardization) is a worldwide fed- eration of national standards bodies (IS0 member bodies). The work of preparing International Standards is normally carried out through IS0 technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. IS0 collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard IS0 4288 was prepared jointly by Technical Com- mittees lSO/TC 57, Metrology and properties of surfaces, Subcommittee SC 1, Geometrical parameters - Instruments and procedures for measurement of surface roughness and waviness, ISO/
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.