EN ISO 5463:2024
(Main)Geometrical product specifications (GPS) - Rotary axis form-measuring instruments - Design and metrological characteristics (ISO 5463:2024)
Geometrical product specifications (GPS) - Rotary axis form-measuring instruments - Design and metrological characteristics (ISO 5463:2024)
This document specifies the most important design and metrological characteristics of rotary axis form-measuring instruments.
It is not applicable to coordinate measurement systems as defined by the ISO 10360 series, whether the systems are fitted with a rotary axis or not, except by special agreement.
Geometrische Produktspezifikationen (GPS) - Formmessgeräte mit Drehachse - Konstruktion und messtechnische Eigenschaften (ISO 5463:2024)
Dieses Dokument legt die wichtigsten Konstruktionsmerkmale und messtechnischen Eigenschaften von Formmessgeräten mit Drehachsen fest.
Es gilt nicht für Koordinatenmesssysteme, wie sie in der Normenreihe ISO 10360 festgelegt sind, unabhängig davon, ob die Systeme mit einer Drehachse ausgestattet sind oder nicht, es sei denn, es besteht eine besondere Vereinbarung.
Spécification géométrique des produits (GPS) - Instruments de mesure de forme à axe rotatif - Caractéristiques de conception et caractéristiques métrologiques (ISO 5463:2024)
Le présent document spécifie les caractéristiques de conception et les caractéristiques métrologiques les plus importantes des instruments de mesure de forme à plateau tournant.
Il ne s’applique pas aux systèmes de mesure de coordonnées tels que définis par la série ISO 10360, que les systèmes soient dotés d’un axe de rotation ou non, sauf en cas d’accord spécial.
Specifikacija geometrijskih veličin izdelka - Oprema za merjenje oblike; naprave za merjenje oblike z rotacijsko osjo - Zasnova in meroslovne značilnosti (ISO 5463:2024)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2024
Specifikacija geometrijskih veličin izdelka - Oprema za merjenje oblike; naprave za
merjenje oblike z rotacijsko osjo - Zasnova in meroslovne značilnosti (ISO
5463:2024)
Geometrical product specifications (GPS) - Form measuring equipment; Rotary axis form
measuring instruments - Design and metrological characteristics (ISO 5463:2024)
Geometrische Produktspezifikationen (GPS) - Formmessgeräte; Formmessgeräte mit
Drehachse - Konstruktion und messtechnische Eigenschaften (ISO 5463:2024)
Spécification géométrique des produits (GPS) - Équipements de mesure de forme ;
Instruments de mesure de forme à plateau tournant - Caractéristiques de conception et
caractéristiques métrologiques (ISO 5463:2024)
Ta slovenski standard je istoveten z: EN ISO 5463:2024
ICS:
17.040.30 Merila Measuring instruments
17.040.40 Specifikacija geometrijskih Geometrical Product
veličin izdelka (GPS) Specification (GPS)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 5463
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2024
EUROPÄISCHE NORM
ICS 17.040.30; 17.040.40
English Version
Geometrical product specifications (GPS) - Rotary axis
form-measuring instruments - Design and metrological
characteristics (ISO 5463:2024)
Spécification géométrique des produits (GPS) - Geometrische Produktspezifikationen (GPS) -
Instruments de mesure de forme à axe rotatif - Formmessgeräte mit Drehachse - Konstruktion und
Caractéristiques de conception et caractéristiques messtechnische Eigenschaften (ISO 5463:2024)
métrologiques (ISO 5463:2024)
This European Standard was approved by CEN on 7 September 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5463:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 5463:2024) has been prepared by Technical Committee ISO/TC 213
"Dimensional and geometrical product specifications and verification" in collaboration with Technical
Committee CEN/TC 290 “Dimensional and geometrical product specification and verification” the
secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2025, and conflicting national standards shall
be withdrawn at the latest by March 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 5463:2024 has been approved by CEN as EN ISO 5463:2024 without any modification.
International
Standard
ISO 5463
First edition
Geometrical product specifications
2024-09
(GPS) — Rotary axis form-
measuring instruments — Design
and metrological characteristics
Spécification géométrique des produits (GPS) — Instruments de
mesure de forme à axe rotatif — Caractéristiques de conception
et caractéristiques métrologiques
Reference number
ISO 5463:2024(en) © ISO 2024
ISO 5463:2024(en)
© ISO 2024
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 5463:2024(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 General terms .2
3.2 Terms relating to probe system .3
4 Design characteristics . 3
4.1 General .3
4.2 Types of rotary axis form-measuring instruments .4
4.2.1 General .4
4.2.2 Rotating workpiece instrument .4
4.2.3 Stationary workpiece instrument.6
4.3 Design characteristics of probe .8
4.3.1 Contact probe .8
4.3.2 Other types of probe .9
5 Metrological characteristics . 9
5.1 General .9
5.2 Rating operating condition . .9
5.2.1 Environmental conditions .9
5.2.2 Operating conditions .10
5.3 Correction of form deviations on material measure .10
5.4 Probe characteristics . .10
5.4.1 Reference point .10
5.4.2 Probe error .10
6 Determination of conformity to specification .12
6.1 General . 12
6.2 Measurement uncertainty . . 12
6.3 Decision rule . 13
Annex A (normative) Design and metrological characteristics for rotating workpiece
instruments . 14
Annex B (informative) Artefacts for metrological characteristics .38
Annex C (informative) Dynamic response of the probe .42
Annex D (informative) Incidental machine characteristics “Cresting” .45
Annex E (informative) Other types of probes .46
Annex F (informative) Relationship to the GPS matrix model .48
Bibliography .49
iii
ISO 5463:2024(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
Th
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.