EN 15624:2008
(Main)Railway applications - Braking - Empty-loaded changeover devices
Railway applications - Braking - Empty-loaded changeover devices
This European Standard is applicable to empty-loaded changeover devices designed to automatically sense when the load of a railway vehicle reaches a defined value (changeover mass), which represents the point at which the vehicle is classed as “loaded” and thereby requires the brake force to be adjusted accordingly to achieve the required brake performance. This European Standard also covers manually operated empty-loaded changeover devices and the associated changeover plates.
This European Standard specifies the requirements for the design, dimensions, manufacture and testing of empty-loaded changeover devices.
Bahnanwendungen - Bremse - Leer-beladen-Umstellvorrichtungen
Diese Europäische Norm gilt für Leer-Beladen-Umstelleinrichtungen, die so beschaffen sind, dass sie automatisch
den Beladungszustand abtasten. Wenn die Last eines Eisenbahnfahrzeuges einen bestimmten Wert
(Umstellmasse oder auch „Umstellgewicht“ genannt), erreicht. Wird das Fahrzeug als Beladen eingestuft, wird
die Bremskraft entsprechend angepasst, um die geforderte Bremswirkung zu erzielen. Diese Europäische
Norm gilt ebenfalls für handbetätigte Umstelleinrichtungen und die zugehörigen Schildlager.
Diese Europäische Norm legt die Anforderungen an die Konstruktion, die Abmessungen, die Herstellung und
Prüfung von Leer-Beladen-Umstelleinrichtungen fest.
Applications ferroviaires - Freinage - Dispositifs de changement de régime Vide-Chargé
La présente Norme européenne est applicable aux dispositifs de changement de régime Vide-Chargé destinés à détecter automatiquement le moment où la charge d’un véhicule ferroviaire atteint une valeur définie (masse de changement de régime) ; cette valeur représente le moment où le véhicule est classé comme «chargé» et de ce fait nécessite un ajustement de la force de freinage pour obtenir les performances requises de freinage. La présente Norme européenne couvre également les dispositifs de changement de régime Vide-Chargé à commande manuelle et les plaques de commutation associées.
La présente Norme européenne spécifie les exigences relatives à la conception, aux dimensions, à la fabrication et aux essais des dispositifs changement de régime Vide-Chargé.
Železniške naprave - Zavore - Avtomatsko menjalo "naloženo-prazno"
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Železniške naprave - Zavore - Avtomatsko menjalo "naloženo-prazno"Bahnanwendungen - Bremse - Leer-beladen-UmstellvorrichtungenApplications ferroviaires - Freinage - Dispositifs de passage vide-chargéRailway applications - Braking - Empty-loaded changeover devices45.040Materiali in deli za železniško tehnikoMaterials and components for railway engineeringICS:Ta slovenski standard je istoveten z:EN 15624:2008SIST EN 15624:2009en,fr01-april-2009SIST EN 15624:2009SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15624October 2008ICS 45.060.01 English VersionRailway applications - Braking - Empty-loaded changeoverdevicesApplications ferroviaires - Freinage - Dispositifs dechangement de régime Vide-ChargéBahnanwendungen - Bremse - Leer-beladen-UmstellvorrichtungenThis European Standard was approved by CEN on 13 September 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15624:2008: ESIST EN 15624:2009
Assessment of an empty-loaded changeover device when fitted to a vehicle.25 A.1 Vehicle assessment – Testing set up.25 A.2 Design acceptance testing set up.25 A.3 Single vehicle static testing.25 A.3.1 Vehicle requirements.25 A.3.2 Test procedures.25 A.4 Running tests.26 A.4.1 General.26 A.4.2 Pneumatic empty-loaded changeover device – Air consumption.26 A.4.3 Pneumatic empty-loaded changeover device – Output signal variation.27 Annex B (informative)
Examples of manual empty-loaded changeover device handles and changeover plates.28 Annex C (informative)
Test bench diagram.30 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 2001/16/EC, as amended by EU Directive 2004/50/EC.31 Bibliography.32
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.