Hexagon high nuts (style 2) - Product grades A and B (ISO 4033:2012)

ISO 4033:2012 specifies the characteristics of hexagon high nuts (style 2), with threads from M5 up to and including M36, with product grade A for threads of diameter less than or equal to M16 and product grade B for threads of diameter greater than M16.

Hohe Sechskantmuttern (Typ 2) - Produktklassen A und B (ISO 4033:2012)

Diese Internationale Norm legt Eigenschaften von hohen Sechskantmuttern (Typ 2) mit Gewinden von M5 bis M36, in Produktklasse A für Gewinde D  M16 und Produktklasse B für Gewinde D  M16, fest.
Falls in besonderen Fällen andere Festlegungen als die in dieser Internationalen Norm aufgeführten benötigt werden, können diese den entsprechenden Internationalen Normen entnommen werden, z. B. ISO 724, ISO 898 2, ISO 965 1 und ISO 4759 1.
ANMERKUNG   Für Sechskantmuttern mit normaler Höhe (Typ 1), siehe ISO 4032.

Écrous hexagonaux hauts (style 2) - Grades A et B (ISO 4033:2012)

L'ISO 4033:2012 spécifie les caractéristiques des écrous hexagonaux hauts (style 2), de diamètres de filetage M5 à M36 inclus, de grade A pour les filetages de diamètre inférieur ou égal à M16 et de grade B pour les filetages de diamètre supérieur à M16.

Šestrobe matice, tip 2 - Razreda izdelave A in B (ISO 4033:2012)

Ta mednarodni standard določa značilnosti šestrobih matic (tip 2) z navoji od M5 do vključno M36, z razredom izdelave A za navoje D ≤ M16 in razredom izdelave B za navoje D > M16. Če so v posebnih primerih zahtevane specifikacije, ki niso navedene v tem mednarodnem standardu, jih je mogoče izbrati iz obstoječih mednarodnih standardov, na primer standardov ISO 724, ISO 898-2, ISO 965-1 in ISO 4759-1.

General Information

Status
Published
Publication Date
18-Dec-2012
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
19-Feb-2013
Completion Date
19-Dec-2012

Relations

Buy Standard

Standard
EN ISO 4033:2014
English language
14 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 4033:2014
01-julij-2014
1DGRPHãþD
SIST EN ISO 4033:2002
Šestrobe matice, tip 2 - Razreda izdelave A in B (ISO 4033:2012)
Hexagon nuts, style 2 - Product grades A and B (ISO 4033:2012)
Sechskantmuttern, Typ 2 - Produktklassen A und B (ISO 4033:2012)
Écrous hexagonaux, style 2 - Grades A et B (ISO 4033:2012)
Ta slovenski standard je istoveten z: EN ISO 4033:2012
ICS:
21.060.20 Matice Nuts
SIST EN ISO 4033:2014 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 4033:2014
---------------------- Page: 2 ----------------------
SIST EN ISO 4033:2014
EUROPEAN STANDARD
EN ISO 4033
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2012
ICS 21.060.20 Supersedes EN ISO 4033:2000
English Version
Hexagon high nuts (style 2) - Product grades A and B (ISO
4033:2012)

Écrous hexagonaux hauts (style 2) - Grades A et B (ISO Sechskantmuttern, Typ 2 - Produktklassen A und B (ISO

4033:2012) 4033:2012)
This European Standard was approved by CEN on 13 November 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same

status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United

Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels

© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4033:2012: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 4033:2014
EN ISO 4033:2012 (E)
Contents Page

Foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 4033:2014
EN ISO 4033:2012 (E)
Foreword

This document (EN ISO 4033:2012) has been prepared by Technical Committee ISO/TC 2 "Fasteners" in

collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which is held by DIN.

This European Standard shall be given the status of a national standard, either by publication of an identical

text or by endorsement, at the latest by June 2013, and conflicting national standards shall be withdrawn at

the latest by June 2013.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN ISO 4033:2000.

According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following

countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech

Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,

Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,

Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

Endorsement notice

The text of ISO 4033:2012 has been approved by CEN as a EN ISO 4033:2012 without any modification.

---------------------- Page: 5 ----------------------
SIST EN ISO 4033:2014
---------------------- Page: 6 ----------------------
SIST EN ISO 4033:2014
INTERNATIONAL ISO
STANDARD 4033
Third edition
2012-12-15
Hexagon high nuts (style 2) — Product
grades A and B
Écrous hexagonaux hauts (style 2) — Grades A et B
Reference number
ISO 4033:2012(E)
ISO 2012
---------------------- Page: 7 ----------------------
SIST EN ISO 4033:2014
ISO 4033:2012(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2012

All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,

electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s

member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2012 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 4033:2014
ISO 4033:2012(E)
Contents Page

Foreword ............................................................................................................................................................................iv

Introduction ........................................................................................................................................................................ v

1 Scope ...................................................................................................................................................................... 1

2 Normative references ......................................................................................................................................... 1

3 Dimensions ........................................................................................................................................................... 1

4 Requirements and reference International Standards .............................................................................. 4

5 Designation ........................................................................................................................................................... 4

Bibliography ....................................................................................................................................................................... 5

© ISO 2012 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 4033:2014
ISO 4033:2012(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies

(ISO member bodies). The work of preparing International Standards is normally carried out through ISO

technical committees. Each member body interested in a subject for which a technical committee has been

established has the right to be represented on that committee. International organizations, governmental and

non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International

Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.

International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.

The main task of technical committees is to prepare International Standards. Draft International Standards

adopted by the technical committees are circulated to the member bodies for voting. Publication as an

International Standard requires approval by at least 75 % of the member bodies casting a vote.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent

rights. ISO shall not be held responsible for identifying any or all such patent rights.

ISO 4033 was prepared by Technical Committee ISO/TC 2, Fasteners, Subcommittee SC 12, Fasteners with

metric internal thread.

This third edition cancels and replaces the second edition (ISO 4033:1999), of which it constitutes a minor revision.

iv © ISO 2012 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 4033:2014
ISO 4033:2012(E)
Introduction

This International Standard belongs to a complete group of product standards developed b

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.