iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1853:1999

(Main)

Agricultural machinery - Trailers with tipping body - Safety

Agricultural machinery - Trailers with tipping body - Safety

This standard specifies specific safety requirements and their verification for the design and construction of agricultural trailers with a tipping body, balanced and semi mounted, where the term agricultural trailer refers to a vehicle used in agriculture only for transportation and which, through its design, is adapted and intended for towing by a tractor or a self-propelled agricultural machine.  This standard is not applicable to trailers with a de-mountable body.  NOTE: Braking requirements are not included in this standard. These will be studied during its revision depending on the development of European regulations.  In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.  The list of significant hazards dealt with in this standard is given in annex A. Annex A also indicates the hazards which have not been dealt with.  Environmental aspects have not been considered in this standard.  This standard applies primarily to machines which are manufactured after the date of issue of the standard.

Landmaschinen - Anhänger mit Kippaufbauten - Sicherheit

Diese Norm enthält spezifische sicherheitstechnische Anforderungen und deren Überprüfung für die Gestaltung und Konstruk-tion von landwirtschaftlichen Gelenk- und Starrdeichsel-Anhängern mit Kippaufbauten, wobei unter dem Begriff landwirtschaftlicher Anhänger ein Fahrzeug zu verstehen ist, das in der Landwirtschaft nur für den Transport eingesetzt wird und das aufgrund der Bauart dazu geeignet und bestimmt ist, von einem Traktor oder einer selbstfahrenden Landmaschine gezogen zu werden.  Diese Norm gilt nicht für Anhänger mit absetzbaren Aufbauten.

Matériel agricole - Remorques à benne basculante - Sécurité

La présente norme européenne détermine les prescriptions spécifiques de sécurité et les vérifications pour la conception et la construction des remorques agricoles à benne basculante, traînées et semi-portées, sachant que l'on entend par remorque agricole un véhicule utilisé en agriculture uniquement pour le transport et qui, de par sa conception, est adapté et prévu pour être attelé à un tracteur ou à une machine agricole automotrice. La présente norme n'est pas applicable aux remorques à benne démontable.

Kmetijski stroji - Prikolice z dvižnim kesonom - Varnost

General Information

Status
Withdrawn
Publication Date
22-Jun-1999
Withdrawal Date
29-Sep-2009
ICS
65.060.10 - Agricultural tractors and trailed vehicles
Technical Committee
CEN/TC 144 - Tractors and machinery for agriculture and forestry
Drafting Committee
CEN/TC 144/WG 3 - Mobile machines and trailers
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
30-Sep-2009
Completion Date
30-Sep-2009
Directive
98/37/EC - Machinery
Mandate
M/079 - Mandate to CEN and CENELEC for standardization in the field of machines
Ref Project
SIST EN 1853:1999 - Agricultural machinery - Trailers with tipping body - Safety

Relations

Merged Into
EN 1853:1999+A1:2009 - Agricultural machinery - Trailers with tipping body - Safety
Effective Date
18-Jan-2023

Buy Standard

EN 1853:1999EN 1853:1999
PreviousNext
Standard
EN 1853:1999
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 1853:1999
01-december-1999
Kmetijski stroji - Prikolice z dvižnim kesonom - Varnost
Agricultural machinery - Trailers with tipping body - Safety
Landmaschinen - Anhänger mit Kippaufbauten - Sicherheit
Matériel agricole - Remorques a benne basculante - Sécurité
Ta slovenski standard je istoveten z: EN 1853:1999
ICS:
65.060.10 Kmetijski traktorji in prikolice Agricultural tractors and
trailed vehicles
SIST EN 1853:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 1853:1999

---------------------- Page: 2 ----------------------

SIST EN 1853:1999

---------------------- Page: 3 ----------------------

SIST EN 1853:1999

---------------------- Page: 4 ----------------------

SIST EN 1853:1999

---------------------- Page: 5 ----------------------

SIST EN 1853:1999

---------------------- Page: 6 ----------------------

SIST EN 1853:1999

---------------------- Page: 7 ----------------------

SIST EN
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 1853:2017+AC:2019(Main + Amendment)
Agricultural machinery - Trailers - Safety
SIST EN 1853:2018+AC:2019

This European Standard specifies safety requirements and their verification for the design and construction of trailers with a tipping body, balanced or semi-mounted, used in agriculture, as defined in 3.1. It includes also hook-lift trailers and trailers with conveyor device as defined in 3.9.
This European Standard does not deal with trailers equipped with pick-up devices and/or rear spreading devices.
Trailers with a load push/push-off device, slats or alternating moving floor may be removed from this standard, provided a new work item on loader wagons and forage transport wagons (prEN ISO 4254-17) is accepted.
This European Standard does not give Required Performance Levels for the identified safety functions.
This European Standard, taken together with EN ISO 4254-1, deals with the significant hazards, hazardous situations and events relevant to agricultural trailers, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Table A.1), excepting the hazards arising from:
-   hazards related to conveying devices other than those defined in 3.9.1 and 3.9.2, for example load push/push-off device;
-   hazards related to the environment and road safety;
-   hazards related to braking.
In addition, it specifies the type of information on safe working practices to be provided by the manufacturer.
This document is not applicable to trailers which are manufactured before the date of its publication as EN.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15695-2:2017(Main)
Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 2: Filters, requirements and test procedures
SIST EN 15695-2:2017

This European Standard is applicable to filters as part of cabs of categories 2, 3 and 4 of agricultural and forestry tractors and self-propelled sprayers as specified in EN 15695 1 in order to limit the exposure of the operator (driver) to hazardous substances, in agricultural and forestry operations. It specifies requirements, test procedures and the information to be provided by the filter manufacturer.
This standard does not cover:
-   the exposure linked to fumigants;
-   the category of cab and performance level to be used for any particular application;
-   the actual cab performance in the field applications;
-   field durability of filters or filtration systems.
This document is not applicable to filters which are manufactured before the date of its publication as EN.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15695-1:2017(Main)
Agricultural tractors and self-propelled sprayers - Protection of the operator (driver) against hazardous substances - Part 1: Cab classification, requirements and test procedures
SIST EN 15695-1:2017

This European Standard is applicable to cabs of agricultural and forestry tractors and self-propelled sprayers. Its purpose is to limit the exposure of the operator (driver) to hazardous substances when applying plant protection products (PPP) and liquid fertilisers. This European Standard specifies different categories of cabs of agricultural and forestry tractors and self-propelled sprayers and the relevant requirements and test procedures in order to limit the exposure of the operator (driver) to hazardous substances when inside the cab. It also specifies the information to be provided by the tractor or self-propelled sprayer manufacturer.
This document does not cover:
-   the exposure linked to fumigants;
-   the category of cab and performance level to be used for any particular application;
-   the actual cab performance in the field applications;
-   the field durability of filters.
This document is not applicable to tractor cabs which are manufactured before the date of its publication as an EN.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16944:2017(Main)
Agricultural machinery and tractors - Standardized access to repair and maintenance information (RMI) - Requirements
SIST EN 16944:2017

This European Standard specifies the requirements to be fulfilled by manufacturers of tractors, interchangeable towed equipment and trailers used in agriculture and forestry in order to comply with the obligation to provide non-discriminatory access for independent operators to Repair and Maintenance Information (RMI) and to provide information on On-Board Diagnostic (OBD) systems.
This standard specifies all organisational and technical requirements and means of verification to comply with the EU Regulation 167/2013 and its Delegated Acts with the objectives to allow the fair competition between manufacturers and between operators and to improve the competitiveness and future viability of companies with special regard to Small and Medium-sized Enterprises (SME).
This European Standard is applicable to agricultural and forestry vehicles approved (respectively to be approved) in accordance with the EU Regulation 167/2013.
This European Standard is not applicable to small series vehicles.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16231-2:2015(Main)
Self-propelled agricultural machinery - Assessment of stability - Part 2: Determination of static stability and test procedures (ISO 16231-2:2015)
SIST EN ISO 16231-2:2015

ISO 16231-2:2015 specifies a method to determine the centre of gravity of un-laden self-propelled machines, a method to determine the centre of gravity of laden machines and combinations with attachments, and methods to determine the static overturning angle.
NOTE          Requirements related to self-protective structures and ROPS are to be dealt with in a separate International Standard.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16230-1:2015(Main)
Agricultural machinery and tractors - Safety of higher voltage electrical and electronic components and systems - Part 1: General requirements (ISO 16230-1:2015)
SIST EN ISO 16230-1:2015

ISO 16230-1:2015 is applicable to tractors and self-propelled ride-on machines, mounted implements, and towed implements used in agriculture and forestry. This part of ISO 16230 specifies general requirements that relate to the protection and safety of operators and bystanders on machines with on-board voltages in the range of 50 V AC to 1000 V AC and 75 V DC to 1500 V DC. This part of ISO 16230 applies to electrical equipment and parts of the electrical equipment on such machines and includes general requirements related to the protection and safety of operators, bystanders, and first responders.
ISO 16230-1:2015 deals with significant hazards, hazardous situations, and events, as listed in Annex A, relevant to this agricultural machinery when used as intended and under the conditions of misuse foreseeable by the manufacturer during normal operation and service.
ISO 16230-1:2015 is not applicable to the following:
-      specific design elements of external interfaces (e.g. the interface between a tractor and implement);
-      externally powered equipment (e.g. line powered equipment, equipment without on-board power generation);
-      purpose built forestry machines;
-      stationary electrical generators.
ISO 16230-1:2015 is not applicable to machines which are manufactured before the date of its publication.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15694:2009+A1:2015(Main + Amendment)
Agricultural and forestry tractors - Passenger seat - Requirements and test procedures
SIST EN 15694:2012+A1:2016

This standard is applicable to agricultural and forestry tractors on which provision is made for carrying one person in addition to the driver. It specifies minimum requirements for space and support, specifies roll-over protective structures (ROPS) test procedures and seat belt requirements, by reference to other standards.
It also specifies the information to be provided by the tractor manufacturer.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16231-1:2013(Main)
Self-propelled agricultural machinery - Assessment of stability - Part 1: Principles (ISO 16231-1:2013)
SIST EN ISO 16231-1:2013

ISO 16231-1:2013 specifies principles for the assessment of stability with respect to the design and construction of self-propelled ride-on machines used in agriculture and the hazard of rolling over or tipping over, or both when the machine is used as intended and under the conditions foreseeable by the manufacturer. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
ISO 16231-1:2013 is not applicable to
?       machines with an unladen mass lower than 400 kg;
?       machines covered by other machine specific standards dealing with the protection against rollover and tip-over (e.g. agricultural tractors, forestry tractors);
?       hazards associated with road transport operations;
?       free fall events;
?       rollover as a result of impact collisions.
ISO 16231-1:2013 is not applicable to machines manufactured before the date of its publication.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16246:2012(Main)
Agricultural machinery - Backhoes - Safety
SIST EN 16246:2013

This European Standard, when used together with EN ISO 4254-1 and EN 15811, specifies the safety requirements and their verification for the design and construction of hydraulic backhoes mounted to the three point linkage of a tractor. It describes methods for the elimination or reduction of hazards arising from the intended use of these machines by one person (the operator) in the course of normal operation and service. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
When requirements of this document are different from those which are stated in EN ISO 4254-1, the requirements of this document take precedence over the requirements of EN ISO 4254-1 for machines that have been designed and built according to the provisions of this document.
This European Standard, taken together with EN ISO 4254-1, deals with all the significant hazards, hazardous situations and events (as listed in Table 1) relevant to hydraulic backhoes mounted to the three point linkage of a tractor, when they are used as intended and under the conditions of misuse foreseeable by the manufacturer.
This European Standard is not applicable to lifting operations for the movement of unit loads with hooks or other similar devices; materials connected with excavation activities shall should not be intended as unit loads and their movement is covered by this Standardstandard.
This European Standard does not give requirements for quick hitch devices.
NOTE 1   An amendment of EN 474-1 is under preparation to deal with this issue. It will be evaluated for inclusion in this European Standard.
NOTE 2   Specific requirements related to road traffic regulations are not taken into account in this European Standard.
This European Standard is not applicable to hydraulic backhoes which are manufactured before the date of its publication as EN.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 709:1997+A4:2009/AC:2012(Corrigendum)
Agricultural and forestry machinery - Pedestrian controlled tractors with mounted rotary cultivators, motor hoes, motor hoes with drive wheel(s) - Safety
SIST EN 709:1998+A4:2010/AC:2013

CEN/TC 144 - Modification to one Figure in 5.7.2.1.

  • Corrigendum
    2 pages
    English language
    sale 10% off
    e-Library read for
    1 day