iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 854:1996

(Main)

Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification

Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification

This European Standard specifies requirements for five types of textile reinforced rubber hoses and hose assemblies of diameter from 5 mm to 100 mm. They are suitable for use with: - Hydraulic fluids in accordance with ISO 6743-4 with the exception of HFD R, HFD S and HFD T at temperatures ranging from -40°C to 100°C; - Water fluids at temperatures ranging from -40°C to +70°C; - Water at temperatures ranging from 0°C to +70°C. The Standard does not include requirements for end fittings. It is limited to the performance of hoses and hose assemblies.

Gummischläuche und -schlauchleitungen - Hydraulikschläuche mit Textileinlage - Spezifikation

Diese Europäische Norm legt Anforderungen für fünf Typen von Schläuchen und Schlauchleitungen mit Textileinlagen vom Innendurchmesser 5 mm bis 100 mm fest; sie sind geeignet zur Verwendung mit: - Hydraulikflüssigkeiten nach ISO 6747-4 mit Ausnahme von HFD R, HFD S und HFD T in einem Temperaturbereich von -40 °C b bis +100 °C; - wäßrigen Flüssigkeiten in einem Temperaturbereich von -40 °C bis +70 °C; - Wasser in einem Temperaturbereich von 0 °C bis +70 °C. Die Norm enthält keine Anforderungen an die Armaturen. Sie beschränkt sich auf die Leistungsfähigkeit der Schläuche und Schlauchleitungen.

Tuyaux et flexibles en caoutchouc - Type hydraulique avec armature de textile - Spécification

La présente Norme Européenne spécifie les exigences pour cinq types de tuyaux et flexibles à armature tressée de fils métalliques, dont les diamètres nominaux vont de 5 mm à 100 mm. Ils sont destinés à être utilisés avec: - les fluides hydrauliques selon ISO 6743-4 à l'exception des HFD R, HFD S et HFD T selon une plage de température de -40 °C à +100 °C; - les fluides aqueux selon une plage de température de -40 °C à +70 °C; - l'eau selon une plage de température de 0 °C à +70°C. La norme ne contient pas des exigences sur les raccords. Elle se limite aux performances des tuyaux et flexibles.

Gumene cevi in cevni priključki - S tekstilom ojačene hidravlične vrste - Specifikacija

General Information

Status
Withdrawn
Publication Date
18-Jun-1996
Withdrawal Date
31-Mar-2015
ICS
23.040.70 - Hoses and hose assemblies
Technical Committee
CEN/TC 218 - Rubber and plastics hoses and hose assemblies
Drafting Committee
CEN/TC 218/WG 2 - Rubber and plastics hoses and hose assemblies for hydraulic applications
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
01-Apr-2015
Ref Project
SIST EN 854:2000 - Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification

Relations

Replaced By
EN 854:2015 - Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
Effective Date
08-Apr-2015

Buy Standard

EN 854:2000EN 854:2000
PreviousNext
Standard
EN 854:2000
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 854:2000
01-december-2000
*XPHQHFHYLLQFHYQLSULNOMXþNL6WHNVWLORPRMDþHQHKLGUDYOLþQHYUVWH
6SHFLILNDFLMD
Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification
Gummischläuche und -schlauchleitungen - Hydraulikschläuche mit Textileinlage -
Spezifikation
Tuyaux et flexibles en caoutchouc - Type hydraulique avec armature de textile -
Spécification
Ta slovenski standard je istoveten z: EN 854:1996
ICS:
23.040.70 Gumene cevi in armature Hoses and hose assemblies
SIST EN 854:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 854:2000

---------------------- Page: 2 ----------------------

SIST EN 854:2000

-------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 5774:2023(Main)
Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2023)
SIST EN ISO 5774:2023

This document specifies the requirements for four types of flexible thermoplastic hose, textile reinforced, for compressed-air applications in the temperature range from −10 °C to +60 °C.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13483:2022(Main)
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification
SIST EN 13483:2022

This document specifies the requirements and test methods for verification for hose assemblies with vapour recovery for delivery systems on petrol filling stations.
Hoses can be constructed from rubber or thermoplastic elastomer (TPE) and this document specifies the requirements for three types of hoses in two grades and two classes of hose assemblies for measured fuel dispensing systems, including oxygenated fuels (≤15 % oxygenated compounds) with internal vapour recovery tubing or hose made out of rubber or thermoplastic elastomer (TPE).
The assemblies are intended for use at ambient temperatures between -30 °C and +55 °C for normal temperature class and -40 °C and +55 °C for low temperature class at a working pressure ≤ 16 bar.
This document is not applicable to multi chamber fuel dispensing hoses.
NOTE As part of the certification of a new dispenser, testing of fuel samples in accordance with EN 228 is carried out at least eight weeks after the first use of the equipment to avoid unrepresentative sulphur content results.
1 bar = 0,1 MPa.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14420-7:2022(Main)
Hose fittings with clamp units - Part 7: Cam locking couplings
SIST EN 14420-7:2022

This document specifies the design, materials, dimensions and marking requirements for cam locking couplings that serve as the link between hoses and connections to transport liquids, solids and gases, except liquid gas and steam.
For all sizes of aluminium cast material couplings and for all couplings of size DN 100, the pressure range is from -0,8 bar to 10 bar in the working temperature range from -20 °C to +65 °C. All other couplings according to this document are capable of operating within the pressure range from 0,8 bar  to 16 bar in the working temperature range from -20 °C to +65 °C.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14420-2:2022(Main)
Hose fittings with clamp units - Part 2: Hose side parts of hose tail
SIST EN 14420-2:2022

This document specifies requirements for the hose tail of hose fittings according to EN 14420-1 for use with clamp units according to EN 14420-3. Furthermore, it specifies materials for hose fittings with clamp units according to EN 14420-4 to EN 14420-8.
Maximum working pressure is 25 bar ; maximum working temperature is 65 °C.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14420-4:2022(Main)
Hose fittings with clamp units - Part 4: Flange connections
SIST EN 14420-4:2022

This document specifies requirements for hose tails according to EN 14420-2, with flanges of mating dimensions PN 10/PN 16/PN 25/PN 40 (according to nominal size and pressure stage) according to EN 1092-1, on hose fittings with clamp units according to EN 14420-3.
Maximum working pressure is 25 bar; maximum working temperature is 65 °C.
Additionally, flanges are also usable according to EN 14422.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8330:2022(Main)
Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2022)
SIST EN ISO 8330:2022

This document defines terms used in the hose industry.
Recommended terminology for electrical conductivity and resistance of rubber and plastics hoses and hose assemblies can be found in ISO 8031:2020, Annex A.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18752:2022(Main)
Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2022)
SIST EN ISO 18752:2022

This document specifies requirements for ten classes, four grades and seven types of wire- or textile-reinforced hydraulic hoses and hose assemblies of nominal sizes ranging from 5 to 102. Each class has a single maximum working pressure for all sizes.
They are suitable for use with:
—    oil-based hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743‑4 at temperatures ranging from −40 °C to +100 °C for types AS, AC, BS and BC hoses and from −40 °C to +120 °C for types CS, CC and DC hoses.
—    water-based fluids HFC, HFAE, HFAS and HFB as defined in ISO 6743‑4 at temperatures ranging from −40 °C to +70 °C.
—    water at temperatures ranging from 0 °C to +70 °C.
This document does not include requirements for the connection ends. It is limited to the performance of hoses and hose assemblies. The hose assembly maximum working pressure is governed by the lowest maximum working pressure of the components.
NOTE       It is the responsibility of the user, in consultation with the hose manufacturer, to establish the compatibility of the hose with the fluid to be used.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4671:2022(Main)
Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2022)
SIST EN ISO 4671:2022

This document specifies methods of measuring the inside diameter, outside diameter (including diameter over reinforcement of hydraulic hoses), wall thickness, concentricity and lining and cover thickness of hoses, methods of measurement and identification of the lengths of hoses and hose assemblies, and a method of verifying the through-bore of hydraulic hose assemblies.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 6801:2021(Main)
Rubber and plastics hoses - Determination of volumetric expansion (ISO 6801:2021)
SIST EN ISO 6801:2022

This document specifies a method for the determination of the volumetric expansion of rubber or plastics hoses under hydrostatic pressure.
This document does not specify the dimensions of the test piece and the test pressure(s) as each of which is specified in the appropriate specification.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 10619-2:2021(Main)
Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2021)
SIST EN ISO 10619-2:2021

This document specifies two methods for measuring the stiffness and one method for the determination of the flexibility of rubber and plastics hoses and tubing when they are bent to a specific radius at sub-ambient temperatures.
Method A is suitable for non-collapsible rubber and plastics hoses and tubing with a bore of up to and including 25 mm. This method provides a means of measuring the stiffness of the hose or tubing when the temperature is reduced from a standard laboratory temperature.
Method B is suitable for rubber and plastics hoses and tubing with a bore of up to 100 mm and provides a means of assessing the flexibility of the hose or tubing when bent around a mandrel at a specified sub-ambient temperature. It can also be used as a routine quality control test.
Method C is suitable for rubber and plastics hoses and tubing with a bore of 100 mm and greater. This method provides a means of measuring the stiffness of the hose and tubing at sub-ambient temperatures. This method is only suitable for hoses and tubing which are non-collapsible.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day