EN ISO 14372:2001
(Main)Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen (ISO 14372:2000)
Welding consumables - Determination of moisture resistance of manual metal arc welding electrodes by measurement of diffusible hydrogen (ISO 14372:2000)
This test method is intended to enable reliable classification of manual metal arc electrode coatings as standard or moisture resistant.
Schweißzusätze - Bestimmung der Feuchteresistenz von Elektroden für das Lichtbogenhandschweißen durch Messung des diffusiblen Wasserstoffs (ISO 14372:2000)
Dieses Prüfverfahren soll eine zuverlässige Einteilung von Umhüllungen von Stabelektroden zum Lichtbogen-handschweißen in konventionelle (ST) oder feuchteresistente (MR) Umhüllungen aufgrund einer 24-stündigen Auslagerung in feuchter Luft und einer nachfolgenden Prüfung des diffusiblen Wasserstoffs ermöglichen.
Produits consommables pour le soudage - Détermination de la reprise d'humidité des électrodes utilisées en soudage manuel à l'arc avec électrode enrobée, par mesurage de l'hydrogène diffusible (ISO 14372:2000)
La présente méthode d'essai est destinée à permettre une classification fiable des enrobages d'électrodes utilisés en soudage manuel à l'arc avec électrode enrobée, en enrobages standards (ST) ou résistant à l'humidité (MR), par une exposition de 24 h à l'air humide suivie d'une détermination de la teneur en hydrogène diffusible.
Dodajni materiali za varjenje - Ugotavljanje občutljivosti na navlaženje elektrod za ročno obločno varjenje z merjenjem difuzijskega vodika (ISO 14372:2000)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2003
'RGDMQLPDWHULDOL]DYDUMHQMH8JRWDYOMDQMHREþXWOMLYRVWLQDQDYODåHQMHHOHNWURG]D
URþQRREORþQRYDUMHQMH]PHUMHQMHPGLIX]LMVNHJDYRGLND ,62
Welding consumables - Determination of moisture resistance of manual metal arc
welding electrodes by measurement of diffusible hydrogen (ISO 14372:2000)
Schweißzusätze - Bestimmung der Feuchteresistenz von Elektroden für das
Lichtbogenhandschweißen durch Messung des diffusiblen Wasserstoffs (ISO
14372:2000)
Produits consommables pour le soudage - Détermination de la reprise d'humidité des
électrodes utilisées en soudage manuel a l'arc avec électrode enrobée, par mesurage de
l'hydrogene diffusible (ISO 14372:2000)
Ta slovenski standard je istoveten z: EN ISO 14372:2001
ICS:
25.160.20 Potrošni material pri varjenju Welding consumables
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 14372
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2001
ICS 25.160.20
English version
Welding consumables - Determination of moisture resistance of
manual metal arc welding electrodes by measurement of
diffusible hydrogen (ISO 14372:2000)
Produits consommables pour le soudage - Détermination Schweißzusätze - Bestimmung der Feuchteresistenz von
de la reprise d'humidité des électrodes utilisées en Elektroden für das Lichtbogenhandschweißen durch
soudage manuel à l'arc avec électrode enrobée, par Messung des diffusiblen Wasserstoffs (ISO 14372:2000)
mesurage de l'hydrogène diffusible (ISO 14372:2000)
This European Standard was approved by CEN on 11 October 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14372:2001 E
worldwide for CEN national Members.
Foreword
The text of the International Standard from Technical Committee ISO/TC 44 " Welding and allied
processes" of the International Organization for Standardization (ISO) has been taken over as an
European Standard by Technical Committee CEN/TC 121 "Welding", the secretariat of which is held by
DS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2002, and conflicting national standards shall be
withdrawn at the latest by April 2002.
NOTE FROM CMC The foreword is susceptible to be amended on reception of the German language version.
The confirmed or amended foreword, and when appropriate, the normative annex ZA for the references to
international publications with their relevant European publications will be circulated with the German version.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of the International Standard ISO 14372:2000 has been approved by CEN as a European
Standard without any modification.
INTERNATIONAL ISO
STANDARD 14372
First edition
2000-09-15
Welding consumables — Determination of
moisture resistance of manual metal arc
welding electrodes by measurement of
diffusible hydrogen
Produits consommables pour le soudage — Détermination de la reprise
d'humidité des électrodes utilisées en soudage manuel à l'arc avec
électrode enrobée, par mesurage de l'hydrogène diffusible
Reference number
ISO 14372:2000(E)
©
ISO 2000
ISO 14372:2000(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 � CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 2000 – All rights reserved
ISO 14372:2000(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of
patent righ
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.