Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:2011)

ISO 7263:2011 specifies two methods for the determination of the flat crush resistance of a corrugating medium after laboratory fluting.
The procedures are applicable to any corrugating medium intended to be used, after fluting, in the manufacture of corrugated board.

Wellenrohpapier - Bestimmung des Flachstauchwiderstandes an labormäßig gewelltem Wellenpapier (ISO 7263:2011)

Diese Internationale Norm legt zwei Prüfverfahren für die Bestimmung des Flachstauchwiderstandes von labormäßig gewelltem Wellenpapier fest.
Diese Verfahren sind für jedes Wellenpapier anwendbar, das für die Herstellung von Wellpappe eingesetzt wird.

Papier cannelure pour carton ondulé - Détermination de la résistance à la compression à plat après cannelage en laboratoire (ISO 7263:2011)

L'ISO 7263:2011 spécifie deux méthodes pour la détermination de la résistance à la compression à plat du papier cannelure pour carton ondulé après cannelage en laboratoire.
Les modes opératoires sont applicables à tout papier cannelure pour carton ondulé destiné à être utilisé, après cannelage, pour la fabrication de carton ondulé.

Valoviti papir - Določanje ploskovne odpornosti po laboratorijskem ovalovljenju (ISO 7263:2011)

Ta mednarodni standard določa dve metodi določanja ploskovne odpornosti valovitega papirja po laboratorijskem ovalovljenju. Postopki se uporabljajo za kateri koli valoviti papir, zato da se po ovalovljenju uporabi v proizvodnji valovitega kartona.

General Information

Status
Withdrawn
Publication Date
14-Feb-2011
Withdrawal Date
08-Jan-2019
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
09-Jan-2019

Relations

Buy Standard

Standard
EN ISO 7263:2011
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Wellenrohpapier- Bestimmung des Flachstauchwiderstandes an labormäßig gewelltem Papier (ISO 7263:2011)Papier cannelure pour carton ondulé - Détermination de la résistance à la compression à plat après cannelage en laboratoire (ISO 7263:2011)Corrugating medium - Determination of the flat crush resistance after laboratory fluting (ISO 7263:2011)85.060Papir, karton in lepenkaPaper and boardICS:Ta slovenski standard je istoveten z:EN ISO 7263:2011SIST EN ISO 7263:2011en01-julij-2011SIST EN ISO 7263:2011SLOVENSKI
STANDARDSIST EN ISO 7263:20091DGRPHãþD



SIST EN ISO 7263:2011



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 7263
February 2011 ICS 85.060 Supersedes EN ISO 7263:2008English Version
Corrugating medium -Determination of the flat crush resistance after laboratory fluting (ISO 7263:2011)
Papier cannelure pour carton ondulé - Détermination de la résistance à la compression à plat après cannelage en laboratoire (ISO 7263:2011)
Wellenrohpapier - Bestimmung des Flachstauchwiderstandes an labormäßig gewelltem Wellenpapier (ISO 7263:2011) This European Standard was approved by CEN on 14 February 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 7263:2011: ESIST EN ISO 7263:2011



EN ISO 7263:2011 (E) 2 Contents Page Foreword .3 SIST EN ISO 7263:2011



EN ISO 7263:2011 (E) 3 Foreword This document (EN ISO 7263:2011) has been prepared by Technical Committee ISO/TC 6 "Paper, board and pulps" in collaboration with Technical Committee CEN/TC 172 “Pulp, paper and board” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2011, and conflicting national standards shall be withdrawn at the latest by August 2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 7263:2008. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 7263:2011 has been approved by CEN as a EN ISO 7263:2011 without any modification.
SIST EN ISO 7263:2011



SIST EN ISO 7263:2011



Reference numberISO 7263:2011(E)© ISO 2011
INTERNATIONAL STANDARD ISO7263Fourth edition2011-02-15Corrugating medium — Determination of the flat crush resistance after laboratory fluting Papier cannelure pour carton ondulé — Détermination de la résistance à la compression à plat après cannelage en laboratoire
SIST EN ISO 7263:2011



ISO 7263:2011(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in thi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.