EN 14767:2005

LPG equipment and accessories - Transportable refillable composite cylinders for Liquefied Petroleum Gas (LPG) - Periodic inspection

This European Standard specifies periodic inspection intervals, procedures for inspection, inspection and testing for transportable refillable composite LPG cylinders with a water capacity from 0,5 l up to and including 150 l.
This European Standard is applicable to cylinders that comprise a liner of metallic material (welded or seamless), or non-metallic material, (or a mixture thereof), reinforced by a wound composite consisting of fibres of glass or carbon or aramid (or a mixture thereof) embedded in a matrix.
This European Standard is also applicable to composite cylinders without liners.

Flüssiggas-Geräte und Ausrüstungsteile - Ortsbewegliche wiederbefüllbare Flaschen aus Verbundwerkstoffen für Flüssiggas (LPG) - Wiederkehrende Prüfung

Diese Europäische Norm legt Zeiträume und Verfahren für die wiederkehrende Prüfung, die Prüfung und den Test für ortsbewegliche wiederbefüllbare Flaschen aus Verbundwerkstoffen für Flüssiggas (LPG) mit einem Fassungsraum von 0,5 l bis einschließlich 150 l fest.
Diese Europäische Norm gilt für Flaschen oder ortsbewegliche Flaschen aus einem Liner aus metallischem Werkstoff (nahtlos oder geschweißt) oder nichtmetallischem Werkstoff (oder ein Gemisch davon), verstärkt durch eine Verbundumwicklung aus Glas- oder Kohlenstoff- oder Aramidfasern (oder ein Gemisch davon), eingebettet in eine Matrix.
Diese Europäische Norm gilt auch für Flaschen aus Verbundwerkstoffen ohne Liner.

Équipements pour GPL et leurs accessoires - Bouteilles en matériau composite, transportables et rechargeables pour gaz de pétrole liquéfié (GPL) - Contrôle périodique

La présente Norme européenne indique la fréquence des contrôles périodiques, les méthodes d’inspection, les contrôles et essais applicables aux bouteilles en matériau composite, transportables et rechargeables pour GPL, d’une capacité en eau de 0,5 l à 150 l inclus.
La présente Norme européenne s’applique aux bouteilles comprenant un liner en matériau métallique (avec ou sans soudure) ou en matériau (ou mélange de matériaux) non métallique, renforcé par un enroulement composite de fibres de verre, de carbone ou d’aramide (ou d’un mélange de ces fibres) enrobé dans une matrice.
La présente Norme européenne s’applique également aux bouteilles en matériau composite sans liner.

Oprema in pribor za utekočinjeni naftni plin (UNP) – Premične, ponovno polnljive jeklenke iz kompozitnih materialov za UNP – Periodični pregled

General Information

• Status: Withdrawn
• Publication Date: 06-Dec-2005
• Withdrawal Date: 26-Feb-2008
• ICS: 23.020.30 - Pressure vessels, gas cylinders
• ICS: 23.020.35 - Gas cylinders
• Technical Committee: CEN/TC 286 - Liquefied petroleum gas equipment and accessories
• Drafting Committee: CEN/TC 286/WG 7 - Operational requirements - Transportable LPG cylinders and static LPG tanks
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 27-Feb-2008
• Completion Date: 27-Feb-2008
• Directive: 94/55/EC - Transport of dangerous goods by road
• Directive: 96/49/EC - Transport of dangerous goods by rail
• Directive: 96/86/EC - Transport of dangerous goods by road (94/55/EC Dir. amendment)
• Directive: 96/87/EC - Transport of dangerous goods by rail (96/49/EC Dir. amendment)
• Mandate: M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
• Ref Project: SIST EN 14767:2006 - LPG equipment and accessories - Transportable refillable composite cylinders for Liquefied Petroleum Gas (LPG) - Periodic inspection

Relations

• Replaced By: EN 1440:2008 - LPG equipment and accessories - Periodic inspection of transportable refillable LPG cylinders
• Effective Date: 22-Dec-2008
• Revised: EN ISO 4210-1:2014 - Cycles - Safety requirements for bicycles - Part 1: Terms and definitions (ISO 4210-1:2014)
• Effective Date: 15-Feb-2012

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.LPG equipment and accessories - Transportable refillable composite cylinders for Liquefied Petroleum Gas (LPG) - Periodic inspectionÉquipements pour GPL et leurs accessoires - Bouteilles en matériau composite, transportables et rechargeables pour gaz de pétrole liquéfié (GPL) - Contrôle périodiqueFlüssiggas-Geräte und Ausrüstungsteile - Ortsbewegliche wiederbefüllbare Flaschen aus Verbundwerkstoffen für Flüssiggas (LPG) - Wiederkehrende PrüfungTa slovenski standard je istoveten z:EN 14767:2005SIST EN 14767:2006en23.020.30ICS:SLOVENSKI
STANDARDSIST EN 14767:200601-marec-2006







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14767December 2005ICS 23.020.30 English VersionLPG equipment and accessories - Transportable refillablecomposite cylinders for Liquefied Petroleum Gas (LPG) -Periodic inspectionÉquipements pour GPL et leurs accessoires - Bouteilles enmatériau composite, transportables et rechargeables pourgaz de pétrole liquéfié (GPL) - Contrôle périodiqueFlüssiggas-Geräte und Ausrüstungsteile - Ortsbeweglichewiederbefüllbare Flaschen aus Verbundwerkstoffen fürFlüssiggas (LPG) - Wiederkehrende PrüfungThis European Standard was approved by CEN on 27 October 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14767:2005: E



EN 14767:2005 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.4 2 Normative references.4 3 Terms and definitions.5 4 Written scheme of inspection.6 5 Procedures for periodic inspection.6 5.1 General.6 5.2 External visual inspection.6 5.2.1 Preparation.6 5.2.2 Inspection procedure.6 5.2.3 Visible defects.6 5.3 Internal visual inspection.8 5.3.1 General.8 5.3.2 Preparation of cylinders.9 5.3.3 Procedure.
...