EN 14914:2005

LPG equipment and accessories - Transportable refillable welded steel cylinders for Liquefied Petroleum Gas (LPG) - Alternative design and construction; periodic inspection

This European Standard specifies inspection intervals, procedures for periodic inspection and testing, for transportable refillable welded steel LPG cylinders of alternative design and construction of water capacity from 0,5 l up to and including 150 l (see EN 14140).
This European Standard does not apply to cylinders permanently installed in vehicles, or to plant and filling equipment.

Flüssiggas- Geräte und Ausrüstungsteile - Ortsbewegliche, wiederbefüllbare, geschweißte Flaschen aus Stahl für Flüssiggas (LPG) - Alternative Gestaltung und Konstruktion; wiederkehrende Prüfung

Diese Europäische Norm beschreibt Zeiträume und Verfahren für die wiederkehrende Prüfung und Prüfung
für ortsveränderliche, wiederbefüllbare, geschweißte Flüssiggasflaschen aus Stahl mit einem Fassungsraum
von 0,5 l bis einschließlich 150 l in Übereinstimmung mit EN 14140.
Diese Norm gilt nicht für Flaschen, die in Fahrzeugen fest eingebaut sind, oder für Anlagen und Füllein-richtungen

Equipements pour gaz de pétrole liquéfié et leurs accessoires - Bouteilles en acier soudées, transportables et rechargeables pour gaz de pétrole liquéfiés (GPL) - Autres solutions en matiére de conception et de fabrication; Inspection périodique

La présente Norme européenne spécifie la fréquence des inspections, les modes opératoires à mettre en
oeuvre pour les inspections périodiques et les essais des bouteilles transportables et rechargeables en acier
soudé, pour gaz de pétrole liquéfié (GPL) avec autres solutions en matière de conception et de fabrication,
d’une capacité en eau de 0,5 l à 150 l inclus (voir l’EN 14140).
La présente Norme européenne ne s’applique ni aux bouteilles installées à demeure dans des véhicules, ni
aux équipements d’installations et de remplissage.

Oprema in pribor za utekočinjeni naftni plin (UNP) – Premične, ponovno polnljive jeklene varjene jeklenke za UNP – Izbira konstruiranja in izdelave – Periodični pregled

General Information

• Status: Withdrawn
• Publication Date: 20-Dec-2005
• Withdrawal Date: 26-Feb-2008
• ICS: 23.020.30 - Pressure vessels, gas cylinders
• ICS: 23.020.35 - Gas cylinders
• Technical Committee: CEN/TC 286 - Liquefied petroleum gas equipment and accessories
• Drafting Committee: CEN/TC 286/WG 7 - Operational requirements - Transportable LPG cylinders and static LPG tanks
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 27-Feb-2008
• Completion Date: 27-Feb-2008
• Directive: 94/55/EC - Transport of dangerous goods by road
• Mandate: M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
• Ref Project: SIST EN 14914:2006 - LPG equipment and accessories - Transportable refillable welded steel cylinders for Liquefied Petroleum Gas (LPG) - Alternative design and construction; periodic inspection

Relations

• Replaced By: EN 1440:2008 - LPG equipment and accessories - Periodic inspection of transportable refillable LPG cylinders
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.LPG equipment and accessories - Transportable refillable welded steel cylinders for Liquefied Petroleum Gas (LPG) - Alternative design and construction; periodic inspectionSUHJOHGEquipements pour gaz de pétrole liquéfié et leurs accessoires - Bouteilles en acier soudées, transportables et rechargeables pour gaz de pétrole liquéfiés (GPL) - Autres solutions en matiére de conception et de fabrication; Inspection périodiqueFlüssiggas- Geräte und Ausrüstungsteile - Ortsbewegliche, wiederbefüllbare, geschweißte Flaschen aus Stahl für Flüssiggas (LPG) - Alternative Gestaltung und Konstruktion; wiederkehrende PrüfungTa slovenski standard je istoveten z:EN 14914:2005SIST EN 14914:2006en23.020.30ICS:SLOVENSKI
STANDARDSIST EN 14914:200601-marec-2006







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14914December 2005ICS 23.020.30 English VersionLPG equipment and accessories - Transportable refillablewelded steel cylinders for Liquefied Petroleum Gas (LPG) -Alternative design and construction; periodic inspectionEquipements pour gaz de pétrole liquéfié et leursaccessoires - Bouteilles en acier soudées, transportables etrechargeables pour gaz de pétrole liquéfiés (GPL) - Autressolutions en matiére de conception et de fabrication;Inspection périodiqueFlüssiggas- Geräte und Ausrüstungsteile - Ortsbewegliche,wiederbefüllbare, geschweißte Flaschen aus Stahl fürFlüssiggas (LPG) - Alternative Gestaltung undKonstruktion; wiederkehrende PrüfungThis European Standard was approved by CEN on 9 December 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14914:2005: E



EN 14914:2005 (E) 2 Contents page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Terms and definitions.5 4 Written scheme of inspection.6 5 Procedures for periodic inspection.6 5.1 General.6 5.2 External visual inspection.7 5.2.1 Preparation for external visual inspection.7 5.2.2 Inspection procedure.7 5.2.3 Visible defects for carbon steel cylinders.7 5.2.4 Visible defects for stainless steel cylinders.9 5.3 Additional inspection / test procedures.11 5.3.1 Preparation of cylinders.
...