EN 13480-8:2007/A1:2011

Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping

2010-05-21 EMA: Consultant added following e-mail from PM sent to dataservice on 2010-05-19.

Metallische industrielle Rohrleitungen - Teil 8: Zusatzanforderungen an Rohrleitungen aus Aluminium und Aluminiumlegierungen

Tuyauteries industrielles métalliques - Partie 8: Exigences complémentaires relatives aux tuyauteries en aluminium et alliages d'aluminium

Kovinski industrijski cevovodi - 8. del: Dodatne zahteve za cevovode iz aluminija in aluminijevih zlitin - Dopolnilo A1

Ta del tega evropskega standarda določa dodatne zahteve za industrijske cevovodne sisteme, narejene iz aluminija in aluminijevih zlitin, poleg splošnih zahtev za industrijske cevovode v skladu s serijo standardov EN 13480 in CEN/TR 13480-7.

General Information

• Status: Withdrawn
• Publication Date: 19-Jul-2011
• Withdrawal Date: 26-Jun-2012
• ICS: 23.040.01 - Pipeline components and pipelines in general
• Technical Committee: CEN/TC 267 - Industrial piping and pipelines
• Drafting Committee: CEN/TC 267/WG 9 - Aluminium and aluminium alloy piping
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 27-Jun-2012
• Completion Date: 27-Jun-2012
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 13480-8:2007/A1:2011 - Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping

Relations

• Replaced By: EN 13480-8:2012 - Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping
• Effective Date: 04-Jul-2012
• Amends: EN 13480-8:2007 - Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium alloy piping
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 13480-8:2007/kFprA1:2011
01-februar-2011
Kovinski industrijski cevovodi - 8. del: Dodatne zahteve za cevovode iz aluminija
in aluminijevih zlitin - Dopolnilo A1
Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium
alloy piping
Metallische industrielle Rohrleitungen - Teil 8: Zusatzanforderungen an Rohrleitungen
aus Aluminium und Aluminiumlegierungen
Tuyauteries industrielles métalliques - Partie 8: Exigences complémentaires relatives aux
tuyauteries en aluminium en alliages d'aluminium
Ta slovenski standard je istoveten z: EN 13480-8:2007/FprA1
ICS:
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
77.150.10 Aluminijski izdelki Aluminium products
SIST EN 13480-8:2007/kFprA1:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13480-8:2007/kFprA1:2011

---------------------- Page: 2 ----------------------

SIST EN 13480-8:2007/kFprA1:2011


EUROPEAN STANDARD
FINAL DRAFT
EN 13480-8:2007
NORME EUROPÉENNE

EUROPÄISCHE NORM
FprA1
December 2010
ICS 23.040.01
English Version
Metallic industrial piping - Part 8: Additional requirements for
aluminium and aluminium alloy piping
Tuyauteries industrielles métalliques - Partie 8: Exigences Metallische industrielle Rohrleitungen - Teil 8:
complémentaires relatives aux tuyauteries en aluminium en Zusatzanforderungen an Rohrleitungen aus Aluminium und
alliages d'aluminium Aluminiumlegierungen
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 267.

This draft amendment A1, if approved, will modify the European Standard EN 13480-8:2007. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2010 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13480-8:2007/FprA1:2010: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13480-8:2007/kFprA1:2011
EN 13480-8:2007/FprA1:2010 (E)
Contents Page
Foreword .3
1 Modification to Clause 2 .4
2 Modification to Clause 5.8 .4
3 Modification to Table 6.2-2 .4
4 Modification to Clause 8.2.3 .4
5 Modification to Table 8.5-1 .4

2

---------------------- Page: 4 ----------------------

SIST EN 13480-8:2007/kFprA1:2011
EN 13480-8:2007/FprA1:2010 (E)
Foreword
This document (EN 13480-8:2007/FprA1:2010) has been prepared by Technical Committee CEN/TC 267
“Metallic industrial piping”, the secretariat of which is held by AFNOR.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
Eu
...

SLOVENSKI STANDARD
SIST EN 13480-8:2007/A1:2011
01-november-2011
Kovinski industrijski cevovodi - 8. del: Dodatne zahteve za cevovode iz aluminija
in aluminijevih zlitin - Dopolnilo A1
Metallic industrial piping - Part 8: Additional requirements for aluminium and aluminium
alloy piping
Metallische industrielle Rohrleitungen - Teil 8: Zusatzanforderungen an Rohrleitungen
aus Aluminium und Aluminiumlegierungen
Tuyauteries industrielles métalliques - Partie 8: Exigences complémentaires relatives aux
tuyauteries en aluminium en alliages d'aluminium
Ta slovenski standard je istoveten z: EN 13480-8:2007/A1:2011
ICS:
77.140.75 Jeklene cevi in cevni profili Steel pipes and tubes for
za posebne namene specific use
77.150.10 Aluminijski izdelki Aluminium products
SIST EN 13480-8:2007/A1:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 13480-8:2007/A1:2011

---------------------- Page: 2 ----------------------

SIST EN 13480-8:2007/A1:2011


EUROPEAN STANDARD
EN 13480-8:2007/A1

NORME EUROPÉENNE

EUROPÄISCHE NORM
July 2011
ICS 23.040.01
English Version
Metallic industrial piping - Part 8: Additional requirements for
aluminium and aluminium alloy piping
Tuyauteries industrielles métalliques - Partie 8: Exigences Metallische industrielle Rohrleitungen - Teil 8:
complémentaires relatives aux tuyauteries en aluminium et Zusatzanforderungen an Rohrleitungen aus Aluminium und
alliages d'aluminium Aluminiumlegierungen
This amendment A1 modifies the European Standard EN 13480-8:2007; it was approved by CEN on 24 April 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13480-8:2007/A1:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 13480-8:2007/A1:2011
EN 13480-8:2007/A1:2011 (E)
Contents Page
Foreword .3
1 Modification to Clause 2 .4
2 Modification to Clause 5.8 .4
3 Modification to Table 6.2-2 .5
4 Modification to Clause 8.2.3 .5
5 Modification to Table 8.5-1 .5

2

---------------------- Page: 4 ----------------------

SIST EN 13480-8:2007/A1:2011
EN 13480-8:2007/A1:2011 (E)
Foreword
This document (EN 13480-8:2007/A1:2011) has been prepared by Technical Committee CEN/TC 267
“Metallic industrial piping”, the secretariat of which is held by AFNOR.
This Amendment to the European Standard EN 13480-8:2007 shall be given the status of a national standard,
either by publication of an identical text or by endorsement, at the latest by January 2012, and conflicting
national standards shall be withdrawn at the latest by January 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
...