Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery

This European Standard specifies the technical conditions for inspection and delivery of wrought aluminium and aluminium alloy extruded rod/bar, tube and profile for general engineering applications.
This European Standard does not apply to:
-   forging stock (EN 603 (all parts)),
-   extruded precision profiles in alloys EN AW-6060 and EN AW-6063 (EN 12020 (all parts)),
-   products delivered in coils (EN 13957),
-   coiled tubes cut to length (EN 13957).

Aluminium und Aluminiumlegierungen - Stranggepresste Stangen, Rohre und Profile - Teil 1: Technische Lieferbedingungen

Diese Europäische Norm legt die Technischen Lieferbedingungen für stranggepresste Stangen, Rohre und Profile aus Aluminium und Aluminium-Knetlegierungen für allgemeine technische Anwendungen fest.
Diese Europäische Norm gilt nicht für:
   Schmiedevormaterial (EN 603 [alle Teile]),
   stranggepresste Präzisionsprofile der Legierungen EN AW-6060 und EN AW-6063
(EN 12020 [alle Teile]),
   Erzeugnisse, die aufgewickelt geliefert werden (EN 13957),
   Rohre in Ringen, die auf Länge geschnitten werden (EN 13957).

Aluminium et alliages d'aluminium - Barres, tubes et profilés filés - Partie 1 : Conditions techniques de contrôle et de livraison

La présente Norme européenne spécifie les conditions techniques de contrôle et de livraison des barres, tubes et profilés filés en aluminium et alliages d’aluminium à usage général.
La présente Norme européenne ne s’applique pas :
-   aux produits destinés à la forge (EN 603 (toutes les parties)) ;
-   aux profilés de précision filés en alliages EN AW-6060 et EN AW-6063 (EN 12020) (toutes les parties)) ;
-   aux produits livrés en couronnes (EN 13957) ;
-   aux tubes en couronnes découpés à longueur (EN 13957).

Aluminij in aluminijeve zlitine - Iztiskane palice/drogovi, cevi in profili - 1. del: Tehnični pogoji za pregled in dobavo

Ta evropski standard določa tehnične pogoje za pregled in dobavo za iztiskane palice/drogove, cevi in profile iz gnetnega aluminija in aluminijeve zlitine za splošno tehnično uporabo.
Ta evropski standard se ne uporablja za:
– material za kovanje (EN 603, vsi deli),
– iztiskane precizne profile iz zlitin EN AW-6060 in EN AW-6063 (EN 12020) (vsi deli),
– izdelke, dobavljene v navojih (EN 13957),
– navojne cevi, razrezane po dolžini (EN 13957).

General Information

Status
Published
Publication Date
07-Jun-2016
Withdrawal Date
30-Dec-2016
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
02-Sep-2022

Relations

Buy Standard

Standard
EN 755-1:2016
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
k FprEN 755-1:2015
English language
18 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 755-1:2016
01-september-2016
1DGRPHãþD
SIST EN 755-1:2008
$OXPLQLMLQDOXPLQLMHYH]OLWLQH,]WLVNDQHSDOLFHGURJRYLFHYLLQSURILOLGHO
7HKQLþQLSRJRML]DSUHJOHGLQGREDYR
Aluminium and aluminium alloys- Extruded rod/bar, tube and profiles - Part 1: Technical
conditions for inspection and delivery
Aluminium und Aluminiumlegierungen - Stranggepresste Stangen, Rohre und Profile -
Teil 1: Technische Lieferbedingungen
Aluminium et alliages d'aluminium - Barres, tubes et profilés filés - Partie 1 : Conditions
techniques de contrôle et de livraison
Ta slovenski standard je istoveten z: EN 755-1:2016
ICS:
77.150.10 Aluminijski izdelki Aluminium products
SIST EN 755-1:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 755-1:2016

---------------------- Page: 2 ----------------------

SIST EN 755-1:2016


EN 755-1
EUROPEAN STANDARD

NORME EUROPÉENNE

June 2016
EUROPÄISCHE NORM
ICS 77.150.10 Supersedes EN 755-1:2008
English Version

Aluminium and aluminium alloys - Extruded rod/bar, tube
and profiles - Part 1: Technical conditions for inspection
and delivery
Aluminium et alliages d'aluminium - Barres, tubes et Aluminium und Aluminiumlegierungen -
profilés filés - Partie 1 : Conditions techniques de Stranggepresste Stangen, Rohre und Profile - Teil 1:
contrôle et de livraison Technische Lieferbedingungen
This European Standard was approved by CEN on 11 April 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 755-1:2016 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 755-1:2016
EN 755-1:2016 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Ordering information . 6
5 Requirements . 8
5.1 Production and manufacturing processes . 8
5.2 Quality control . 8
5.3 Chemical composition limits . 8
5.4 Mechanical properties . 8
5.5 Freedom from surface defects . 9
5.6 Tolerances on dimensions and form .
...

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aluminium und Aluminiumlegierungen - Stranggepresste Stangen, Rohre und Profile - Teil 1: Technische LieferbedingungenAluminium et alliages d'aluminium - Barres, tubes et profilés filés - Partie 1 : Conditions techniques de contrôle et de livraisonAluminium and aluminium alloys- Extruded rod/bar, tube and profiles - Part 1: Technical conditions for inspection and delivery77.150.10Aluminijski izdelkiAluminium productsICS:Ta slovenski standard je istoveten z:FprEN 755-1kSIST FprEN 755-1:2015en,fr,de01-november-2015kSIST FprEN 755-1:2015SLOVENSKI
STANDARD



kSIST FprEN 755-1:2015



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
FINAL DRAFT
FprEN 755-1
September
t r s w ICS
y yä s w rä s r Will supersede EN
y w wæ sã t r r zEnglish Version
Aluminium and aluminium alloand profiles æ Part
sã Technical conditions for inspection and delivery Aluminium et alliages d 5aluminium æ Barresá tubes et profilés filés æ Partie
s ã Conditions techniques de contrôle et de livraison
Aluminium und Aluminiumlegierungen æ Stranggepresste Stangená Rohre und Profile æ Teil
sã Technische Lieferbedingungen This draft European Standard is submitted to CEN members for unique acceptance procedureä It has been drawn up by the
If this draft becomes a European Standardá CEN members are bounwhich stipulate the conditions for giving this European Standard the status of a national standard without any alterationä
This draft European Standard was established by CEN in three ofer language made by translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
Recipients of this draft are invited to submitá with their commentsá notification of any relevant patent rights of which they are aware and to provide supporting documentationä
Warning ã This document is not a European Standardä It is distributed for review and commentsä It is subject to change without notice and shall not be referred to as a European Standardä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
9
t r s w CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä FprEN
y w wæ sã t r s w EkSIST FprEN 755-1:2015



FprEN 755-1:2015 (E) 2 Contents Page European foreword . 3 1 Scope . 4 2 Normative references . 4 3 Terms and definitions . 5 4 Ordering information . 5 5 Requirements . 7 5.1 Production and manufacturing processes . 7 5.2 Quality control . 7 5.3 Chemical composition limits . 7 5.4 Mechanical properties . 7 5.5 Freedom from surface defects . 8 5.6 Tolerances on dimensions and form . 8 5.7 Stress corrosion cracking resistance . 8 5.8 Additional requirements .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.