EN 71-7:2014+A2:2018
(Main)Safety of toys - Part 7: Finger paints - Requirements and test methods
Safety of toys - Part 7: Finger paints - Requirements and test methods
This part of EN 71 specifies requirements for the substances and materials used in finger paints and applies to finger paints only.
Additional requirements are specified for markings, labelling and containers.
Sicherheit von Spielzeug - Teil 7: Fingermalfarben - Anforderungen und Prüfverfahren
Dieser Teil der EN 71 legt Anforderungen an die in Fingermalfarben verwendeten Stoffe und Materialien fest und gilt nur für Fingermalfarben.
Für Beschriftung, Kennzeichnung und Behälter sind zusätzliche Anforderungen festgelegt.
Sécurité des jouets - Partie 7: Peintures au doigt - Exigences et méthodes d'essai
La présente partie de l'EN 71 fixe des exigences relatives aux substances et produits utilisés dans les peintures au doigt et s’applique uniquement aux peintures au doigt.
Des exigences complémentaires sont données pour le marquage, l'étiquetage et l'emballage.
Varnost igrač - 7. del: Prstne barve - Zahteve in preskusne metode (vključno z dopolnilom A2)
Ta del standarda EN 71 določa zahteve za snovi in materiale, ki se uporabljajo v prstnih barvah in veljajo samo za prstne barve.
Dodatne zahteve so določene za označevanje, etiketiranje in embalažo.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2018
1DGRPHãþD
SIST EN 71-7:2014+A1:2017
9DUQRVWLJUDþGHO3UVWQHEDUYH=DKWHYHLQSUHVNXVQHPHWRGHYNOMXþQR]
GRSROQLORP$
Safety of toys - Part 7: Finger paints - Requirements and test methods
Sicherheit von Spielzeug - Teil 7: Fingermalfarben - Anforderungen und Prüfverfahren
Sécurité des jouets - Partie 7: Peintures au doigt - Exigences et méthodes d'essai
Ta slovenski standard je istoveten z: EN 71-7:2014+A2:2018
ICS:
97.200.50 ,JUDþH Toys
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 71-7:2014+A2
EUROPEAN STANDARD
NORME EUROPÉENNE
February 2018
EUROPÄISCHE NORM
ICS 97.200.50 Supersedes EN 71-7:2014+A1:2017
English Version
Safety of toys - Part 7: Finger paints - Requirements and
test methods
Sécurité des jouets - Partie 7: Peintures au doigt - Sicherheit von Spielzeug - Teil 7: Fingermalfarben -
Exigences et méthodes d'essai Anforderungen und Prüfverfahren
This European Standard was approved by CEN on 31 August 2017 and includes Amendment 2 approved by CEN on 9 January
2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 71-7:2014+A2:2018 E
worldwide for CEN national Members.
Contents
Page
European foreword . 5
Introduction . 7
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 8
4 Requirements . 9
4.1 General . 9
4.2 Colourants . 9
4.3 Preservatives . 10
4.4 Migration of certain elements . 10
4.5 Limits for impurities . 10
4.5.1 Limits for primary aromatic amines . 10
4.5.2 Limits for other impurities . 11
4.6 Taste and smell . 12
4.7 pH-value . 12
4.8 Binding agents, extenders, humectants and surfactants . 12
4.9 N-Nitrosamines . 12
4.10 Containers . 13
5 Product information . 13
5.1 General . 13
5.2 Marking . 13
5.2.1 Primary packaging . 13
5.2.2 Container . 14
Annex A (informative) Non-exhaustive list of colourants which are commonly used in finger
paints, and need to be in compliance with both the general and specified purity
requirements . 15
Annex B (normative) List of preservatives allowed for use in finger paints . 21
Annex C (informative) Ingredients used in the manufacture of finger paints . 26
Annex D (normative) Method for the detection of certain azo colourants and determination
of free primary aromatic amines . 28
D.1 General . 28
D.2 Reagents . 29
D.3 Apparatus . 30
D.4 Instrumentation . 30
D.5 Sampling procedure . 30
D.6 Procedure. 31
D.7 Calculation . 40
D.8 Precision . 41
D.8.1 Linearity . 41
D.8.2 Limits of Detection (LOD) and Quantification (LOQ) . 41
D.8.3 Repeatability and reproducibility data for soluble aromatic amines . 42
D.8.4 Repeatability and reproducibility data for reductively cleaved aromatic amines . 43
D.8.5 Recovery . 44
D.9 Report . 46
D.10 Additional Information . 46
Annex E (normative) Method for the determination of hexachlorobenzene, polychlorinated
biphenyls and benzo[α]pyrene . 47
E.1 Principle . 47
E.2 Standards, reagents and solvents . 47
E.3 Apparatus . 49
E.4 Instrumentation . 50
E.5 Sampling . 50
E.6 Procedure . 50
E.6.1 General . 50
E.6.2 Sample preparation . 50
E.6.3 Solvent extraction . 50
E.6.4 Solid phase extraction . 51
E.6.5 Sample concentration for determining HCB and PCB congeners . 51
E.6.6 Sample concentration for determining B[α]P . 51
E.6.7 Gas chromatography conditions . 51
E.6.8 Mass spectrometry . 52
E.6.9 SIM mode . 52
E.7 Calculation. 57
E.8 Precision . 60
E.8.1 Linearity . 60
E.8.2 Limits of detection (LOD) and Quantification (LOQ) . 60
E.8.3 Repeatability and reproducibility data for HCB, PCB congeners and B[α]P . 60
E.8.4 Recovery . 61
E.9 Report . 62
E.10 Additional information . 62
Annex F (informative) Rationale . 67
F.1 Finger paints (see 3.1 and 3.2) . 67
F.2 Colourants (see 4.2.1) . 67
F.3 Preservatives (see 4.3) . 67
F.4 Elements (see 4.4) . 67
F.5 Primary aromatic amines (see 4.5.1.2, Tables 1 and 2 and Annex D) . 67
F.6 Limit for Ben
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.