EN ISO 5829:2021
(Main)Resistance spot welding - Electrode adaptors, female taper 1:10 (ISO 5829:1984)
Resistance spot welding - Electrode adaptors, female taper 1:10 (ISO 5829:1984)
Specifies the dimensions and tolerances of resistance spot welding electrode adaptors where the fixing element for the cap is a female taper (male electrode cap, see ISO 5830) and for which the electrode taper fits conform to ISO 1089. Covers also designation, material and marking.
Widerstandspunktschweißen - Elektrodenadapter, Innenkegel 1 : 10 (weiblich) (ISO 5829:1984)
Diese Internationale Norm legt die Maße und Toleranzen von Widerstandspunktschweiß-Elektrodenadaptern fest, bei denen das Befestigungselement für die Kappe ein Innenkonus (Elektrodeneinsteckkappe, siehe ISO 5830) ist und zu der der Elektrodenkonus nach ISO 1089 passt.
Soudage par points par résistance - Allonges d'électrode à embout amovible (cône femelle 1/10) (ISO 5829:1984)
Uporovno točkovno varjenje - Elektrodna držala z notranjim konusom 1:10 (ISO 5829:1984)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 5829:2021
01-marec-2021
Uporovno točkovno varjenje - Elektrodna držala z notranjim konusom 1:10 (ISO
5829:1984)
Resistance spot welding - Electrode adaptors, female taper 1:10 (ISO 5829:1984)
Widerstandspunktschweißen - Elektrodenadapter, Innenkegel 1:10 (weiblich) (ISO
5829:1984)
Soudage par points par résistance - Allonges d'électrode à embout amovible (cône
femelle 1/10) (ISO 5829:1984)
Ta slovenski standard je istoveten z: EN ISO 5829:2021
ICS:
25.160.30 Varilna oprema Welding equipment
SIST EN ISO 5829:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 5829:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 5829:2021
EN ISO 5829
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2021
EUROPÄISCHE NORM
ICS 25.160.30
English Version
Resistance spot welding - Electrode adaptors, female taper
1:10 (ISO 5829:1984)
Soudage par points par résistance - Allonges Widerstandspunktschweißen - Elektrodenadapter,
d'électrode à embout amovible (cône femelle 1/10) Innenkegel 1 : 10 (weiblich) (ISO 5829:1984)
(ISO 5829:1984)
This European Standard was approved by CEN on 6 December 2020.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5829:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 5829:2021
EN ISO 5829:2021 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 5829:2021
EN ISO 5829:2021 (E)
European foreword
The text of ISO 5829:1984 has been prepared by Technical Committee ISO/TC 44 "Welding and allied
processes” of the International Organization for Standardization (ISO) and has been taken over as
EN ISO 5829:2021 by Technical Committee CEN/TC 121 “Welding and allied processes” the secretariat
of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2021, and conflicting national standards shall be
withdrawn at the latest by July 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 5829:1984 has been approved by CEN as EN ISO 5829:2021 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 5829:2021
---------------------- Page: 6 ----------------------
SIST EN ISO 5829:2021
---------------------- Page: 7 ----------------------
SIST EN ISO 5829:2021
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of preparing International
Standards is normally carrie
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.