prEN ISO 16122-1
(Main)Agricultural and forestry machinery - Inspection of sprayers and liquid fertilizer distributors in use - Part 1: General (ISO/DIS 16122-1:2011)
Agricultural and forestry machinery - Inspection of sprayers and liquid fertilizer distributors in use - Part 1: General (ISO/DIS 16122-1:2011)
This International Standard applies to all types of machinery for pesticide application applicators used in agriculture, horticulture, forestry and other areas.
ISO 16122 specifies the requirements and test methods for the inspection of machines in use.
It relates mainly to the condition of the machine with respect to its potential risk for the environment and its performance to achieve a good application.
This part of ISO 16122 defines the general requirements to be fulfilled. The specific requirements to the different types of machines are defined in the relevant specific parts. The scope of each specific part is defined in Annex A, normative.
It also includes minimum safety requirements dealing with the operator’s safety during inspection.
Land- und Forstmaschinen - Kontrolle von in Gebrauch befindlichen Pflanzenschutzgeräten zum Ausbringen von Pflanzenschutzmitteln und flüssigen Düngemitteln - Teil 1: Allgemeines (ISO/DIS 16122-1:2011)
Diese Internationale Norm gilt für alle Arten von Pflanzenschutzgeräten zum Ausbringen von Pflanzenschutzmitteln
und flüssigen Düngemitteln, die in der Landwirtschaft, dem Gartenbau, der Forstwirtschaft und anderen
Bereichen verwendet werden. Diese werden im vorliegenden Teil als „Geräte“ bezeichnet.
ISO 16122 legt die Anforderungen und Prüfverfahren für die Sichtkontrolle von in Gebrauch befindlichen Geräten
fest.
Dieser Teil legt auch Mindestanforderungen an die Vorbereitung des Gerätes für die Prüfung fest.
Dieser Teil befasst sich in erster Linie mit dem Gerätezustand hinsichtlich des potenziellen Risikos für die
Umwelt und der Funktionsfähigkeit zum Erzielen einer anwendungsgerechten Leistung.
Dieser Teil von ISO 16122 legt die zu erfüllenden allgemeinen Anforderungen fest. Die besonderen Anforderungen
an die verschiedenen Gerätearten sind in den entsprechenden besonderen Teilen festgelegt. Der Anwendungsbereich
jedes besonderen Teils ist in Anhang A festgelegt.
Dieser Teil enthält auch Mindestanforderungen hinsichtlich der Sicherheit des Prüfpersonals (ausführender
Prüfer) während der Gerätekontrolle.
Matériel agricole et forestier - Contrôle des pulvérisateurs et distributeurs d'engrais liquides en service - Partie 1: Généralités (ISO/DIS 16122-1:2011)
l'ISO 16122-1:2015 spécifie les exigences générales à respecter pour tous les types de pulvérisateurs pour produits phytosanitaires utilisés dans l'agriculture, l'horticulture, la sylviculture et autres domaines, excepté les pulvérisateurs à dos (voir l'ISO 19932‑1 et l'ISO 19932‑2).
Les exigences spécifiques pour les différents types de pulvérisateurs sont définies dans les parties spécifiques appropriées de l'ISO 16122. Lorsqu'elle est utilisée conjointement avec la partie spécifique appropriée au pulvérisateur concerné, l'ISO 16122-1:2015 spécifie les exigences et les méthodes d'essai pour le contrôle des pulvérisateurs en service. Les exigences se rapportent principalement à l'état du pulvérisateur vis-à-vis des risques potentiels pour l'environnement et de sa performance pour obtenir une bonne application.
l'ISO 16122-1:2015 inclut également des exigences minimales pour la préparation du pulvérisateur au contrôle et les prescriptions de sécurité minimum en ce qui concerne la sécurité de l'inspecteur (opérateur d'essai) lors du contrôle.
Kmetijski in gozdarski stroji - Kontrola škropilnikov v uporabi - 1. del: Splošno (ISO/DIS 16122-1:2022)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2023
Kmetijski in gozdarski stroji - Kontrola škropilnikov v uporabi - 1. del: Splošno
(ISO/DIS 16122-1:2022)
Agricultural and forestry machinery - Inspection of sprayers in use - Part 1: General
(ISO/DIS 16122-1:2022)
Land- und Forstmaschinen - Kontrolle von in Gebrauch befindlichen
Pflanzenschutzgeräten - Teil 1: Allgemeines (ISO/DIS 16122-1:2022)
Matériel agricole et forestier - Contrôle des pulvérisateurs en service - Partie 1:
Généralités (ISO/DIS 16122-1:2022)
Ta slovenski standard je istoveten z: prEN ISO 16122-1
ICS:
65.060.40 Oprema za nego rastlin Plant care equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT INTERNATIONAL STANDARD
ISO/DIS 16122-1
ISO/TC 23/SC 6 Secretariat: AFNOR
Voting begins on: Voting terminates on:
2022-12-26 2023-03-20
Agricultural and forestry machinery — Inspection of
sprayers in use —
Part 1:
General
Matériel agricole et forestier — Contrôle des pulvérisateurs en service —
Partie 1: Généralités
ICS: 65.060.40
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 16122-1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
ISO/DIS 16122-1:2022(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 16122-1
ISO/TC 23/SC 6 Secretariat: AFNOR
Voting begins on: Voting terminates on:
Agricultural and forestry machinery — Inspection of
sprayers in use —
Part 1:
General
Matériel agricole et forestier — Contrôle des pulvérisateurs en service —
Partie 1: Généralités
ICS: 65.060.40
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2022
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 16122-1:2022(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2022
ISO/DIS 16122-1:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Criteria for classification of sprayers . 1
5 Pre-inspection requirements . .2
5.1 General . 2
5.2 Place for inspection . 2
5.3 Pre-inspection . . 2
5.3.1 General . 2
5.3.2 Cleaning . 2
5.3.3 Power transmission parts . 2
5.3.4 Moving parts . 2
5.3.5 Hydraulic system . 3
5.3.6 Structural parts and framework . 3
5.3.7 Lockable foldable parts . 3
5.3.8 Blower . 3
5.3.9 Electrical safety (for electrical systems on sprayers > 50 V) . . 4
6 Inspection . 4
7 Test report . 4
Annex A (informative) Parts of ISO 16122 dealing with specific sprayer types .6
Annex ZA (informative) Relationship between this European Standard and the essential
health and safety and environmental requirements of Directive 2009/128/EC .8
Bibliography .10
iii
ISO/DIS 16122-1:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture
and forestry, Subcommittee SC 6, Equipment for crop protection.
This second edition cancels and replaces the first edition ISO 16122-1:2015, which has been technically
revised.
The main purpose of this second edition was to remove errors and resolve contradictions to the
ISO 16119 series which specifies environmental requirements for new sprayers.
The main changes compared to the previous edition are as follows:
— Normative references (updated)
— Pre-inspection (modified)
— Inspection (modified)
— Test report (modified)
A list of all parts in the ISO 16122 series can be found on the ISO website.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
ISO/DIS 16122-1:2022(E)
Introduction
There are two main reasons for the inspection:
— less potential risk of environmental contamination by plant protection products;
— good control of the pest with the minimum possible input of plant protection product.
In order to use plant protection products in agricultural production safely, it is necessary to define the
requirements and test methods for sprayers in use. This is a relevant step after having standardized
minimum requirements for new sprayers, in respect of safety hazards (see ISO 4254-6) and potential
risks of environmental contamination (see ISO 16119 series).
Standardising the requirements and methods for inspection of sprayers in use takes into consideration
not only the original performance of the sprayer but also its use, care and maintenance. This is a logical
link to ensure the continued benefit arising from the supply of new sprayers of good quality.
The inspection of sprayers in use can be a mandatory requirement or adopted on a voluntary basis. In
both cases further requirements, outside the scope of this standard, are necessary for the management
of inspections. These include, for example, requirements for the competence of persons carrying out
inspections and the frequency of inspections.
NOTE National or local regulations may also apply concerning the qualifications and competence of
inspectors.
v
DRAFT INTERNATIONAL STANDARD ISO/DIS 16122-1:2022(E)
Agricultural and forestry machinery — Inspection of
sprayers in use —
Part 1:
General
1 Scope
This part of ISO 16122 defines the general requirements to be fulfilled for the inspection of all types
of sprayers for plant protection products used in agriculture, horticulture, forestry and other areas,
except knapsack sprayers.
NOTE For knapsack sprayers, see ISO 19932–3.
The specific requirements for the different types of sprayers are defined in the relevant specific parts
of ISO 16122. When used in conjunction with the relevant sprayer specific part (see Annex A), this part
of ISO 16122 specifies the requirements and test methods for the inspection of sprayers in use.
The requirements relate mainly to the condition of the sprayer with respect to potential risks for the
environment and its performance to achieve a good application.
This part of ISO 16122 also includes minimum requirements for the preparation of the sprayer for
the inspection and the minimum safety requirements with respect to the safety of the inspector (test
operator) during the inspection.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.