EN 12873-1:2014

Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for factory-made products made from or incorporating organic or glassy (porcelain/vitreous enamel) materials

This European Standard specifies a procedure to determine the migration of substances from factory-made or factory-applied products for use in contact with water intended for human consumption. Materials used to make such products include plastics, rubber and glassy (porcelain/vitreous enamel) materials.
This European Standard is applicable to products intended to be used under various conditions for the transport and storage of water intended for human consumption, including raw water used for the production of water intended for human consumption. It covers the extraction by water of substances from the finished products.

Einfluss von Materialien auf Trinkwasser - Einfluss infolge der Migration - Teil 1: Prüfverfahren für fabrikmäßig hergestellte Produkte aus oder mit organischen oder glasartigen Materialien (Emails/Emaillierungen)

Diese Europäische Norm legt ein Verfahren fest, um die Migration von Stoffen aus fabrikmäßig hergestellten oder in der Fabrik aufgebrachten Produkten, die mit Trinkwasser in Kontakt kommen, zu bestimmen. Die Materialien für die Herstellung solcher Produkte schließen Kunststoffe, Elastomere und glasartige Materialien (Emails/Emaillierungen) ein.
Diese Europäische Norm ist anwendbar auf Produkte, die unter verschiedenen Bedingungen für den Transport und die Speicherung von Trinkwasser genutzt werden, einschließlich für Rohwasser, das zur Herstellung von Trinkwasser vorgesehen ist. Er beschreibt die Extraktion von Stoffen aus den Fertigprodukten durch Wasser.

Influence des matériaux en contact sur l’eau destinée à la consommation humaine - Influence de la migration - Partie 1: Méthode d’essai des matériaux de fabrication industrielle constitués de ou contenant des matériaux organiques ou vitreux (émaux vitrifiés)

La présente Norme européenne spécifie une méthode de détermination de la migration de substances à partir de produits fabriqués ou appliqués en usine, prévus pour être utilisés en contact avec l’eau destinée à la consommation humaine. Les matériaux utilisés pour fabriquer ce type de produits incluent les plastiques, le caoutchouc et les matériaux vitreux (émaux vitrifiés).
La présente Norme européenne s’applique à des matériaux destinés à être utilisés dans diverses conditions pour le transport et le stockage de l’eau destinée à la consommation humaine, y compris les eaux brutes utilisées pour la production d’eau destinée à la consommation humaine. Elle traite de l’extraction par l’eau de substances provenant des produits finis.

Vpliv materiala na pitno vodo - Vpliv migracije - 1. del: Preskusna metoda za industrijske proizvode, ki so izdelani iz organskih ali steklastih materialov (porcelan/steklovina) ali jih vsebujejo

Standard EN 12873-1 določa postopek za ugotavljanje migracije snovi iz tovarniško izdelanih ali tovarniško uporabljenih proizvodov, ki so pri uporabi v stiku s pitno vodo. Materiali, ki se uporabljajo za izdelavo tovrstnih proizvodov, vključujejo polimerne, elastomerne in steklaste materiale (porcelan/emajl). Ta evropski standard obravnava proizvode, namenjene uporabi v različnih pogojih za prevoz in shranjevanje pitne vode, vključno z neobdelano vodo, ki se uporablja za pripravo pitne vode. Zajema vodno ekstrakcijo snovi iz končnih izdelkov.

General Information

• Status: Published
• Publication Date: 01-Jul-2014
• Withdrawal Date: 30-Jan-2015
• ICS: 13.060.20 - Drinking water
• ICS: 67.250 - Materials and articles in contact with foodstuffs
• Technical Committee: CEN/TC 164 - Water supply
• Drafting Committee: CEN/TC 164/WG 3 - Effects of materials in contact with drinking water
• Current Stage: 9020 - Submission to 2 Year Review Enquiry - Review Enquiry
• Start Date: 15-Oct-2025
• Completion Date: 15-Oct-2025
• Directive: 98/83/EC - Quality of water intended for human consumption
• Mandate: M/136 REV2 - Revised mandate M/136 to CEN and CENELEC concerning the execution of standardisation work for harmonised standards on construction products in contact with water intended for human consumption related to the following end use: Transportation, storage and distribution up to, and including the consumer tap of the water intended for human consumption
• Ref Project: SIST EN 12873-1:2014 - Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for factory-made products made from or incorporating organic or glassy (porcelain/vitreous enamel) materials

Relations

• Replaces: EN 12873-1:2003 - Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for non-metallic and non-cementitious factory made products
• Effective Date: 22-Feb-2012

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Vpliv materiala na pitno vodo - Vpliv migracije - 1. del: Preskusna metoda za industrijske proizvode, ki so izdelani iz organskih ali steklastih materialov (porcelan/steklovina) ali jih vsebujejoEinfluss von Materialien auf Trinkwasser - Einfluss infolge der Migration - Teil 1: Prüfverfahren für fabrikmäßig hergestellte Produkte aus oder mit organischen oder glasartigen Materialien (Emails/Emaillierungen)Influence des matériaux en contact sur l’eau destinée à la consommation humaine - Influence de la migration - Partie 1: Méthode d’essai des matériaux de fabrication industrielle constitués de ou contenant des matériaux organiques ou vitreux (émaux vitrifiés)Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for factory-made products made from or incorporating organic or glassy (porcelain/vitreous enamel) materials67.250Materiali in predmeti v stiku z živiliMaterials and articles in contact with foodstuffs13.060.20Pitna vodaDrinking waterICS:Ta slovenski standard je istoveten z:EN 12873-1:2014SIST EN 12873-1:2014en,de01-oktober-2014SIST EN 12873-1:2014SLOVENSKI
STANDARDSIST EN 12873-1:20041DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 12873-1
July 2014 ICS 13.060.20; 67.250 Supersedes EN 12873-1:2003English Version
Influence of materials on water intended for human consumption - Influence due to migration - Part 1: Test method for factory-made products made from or incorporating organic or glassy (porcelain/vitreous enamel) materials
Influence des matériaux en contact sur l'eau destinée à la consommation humaine - Influence de la migration - Partie 1: Méthode d'essai des matériaux de fabrication industrielle constitués de ou contenant des matériaux organiques ou vitreux (émaux vitrifiés)
Einfluss von Materialien auf Trinkwasser - Einfluss infolge der Migration - Teil 1: Prüfverfahren für fabrikmäßig hergestellte Produkte aus oder mit organischen oder glasartigen Materialien (Emails/Emaillierungen) This European Standard was approved by CEN on 14 May 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 12873-1:2014 ESIST EN 12873-1:2014

Arrangement for flushing pipes with nominal size greater than DN 80 . 18 Annex B (informative)
Additional procedures for testing non-homogeneous products and pipes with nominal size greater than DN 80 . 21 B.1 Arrangements for testing. 21 B.2 Flushing of the test piece . 21 B.3 Blank test. 21 B.4 Sealing . 21 B.5 Calculation of the surface area-to-volume ratio (S/V) value for test arrangement 1 . 24 Annex C (informative)
Examples of extended collection and analysis of migration waters . 26 Annex D (informative)
Procedural tests using standard additions (positive controls) . 28 Annex E (informative)
Flow diagrams for migration test procedure for cold water temperature and elevated temperature . 29 Annex F (informative)
Description of a cell system for testing glassy materials . 31 Bibliography . 33
This European Standard specifies a procedure to determine the migration of substances from factory-made or factory-applied products for use in contact with water intended for human consumption. Materials used to make such products include plastics, rubber and glassy (porcelain/vitreous enamel) materials. This European Standard is applicable to products intended to be used under various conditions for the transport and storage of water intended for human consumption, including raw water used for the production of water intended for human consumption. It covers the extraction by water of substances from the finished products. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 15826, Vitreous and porcelain enamels - Terminology EN ISO 7393-2, Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric method using N, N-diethyl-1, 4-phenylenediamine, for routine control purposes (ISO 7393-2) EN ISO 28764, Vitreous and porcelain enamels - Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron (ISO 28764) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1
test technical operation that consists of the determination of one or more characteristics of a given product 3.2 test procedure specified technical method for performing a test 3.3 test report document that presents test results and other information relevant to a test 3.4 test laboratory laboratory that performs tests 3.5
product manufactured item, in its finished form, that comes into contact with water intended for human consumption, or a component part of a manufactured item 3.6
homogeneous product a product where the water contact surface is made from the same material as the remainder of the product SIST EN 12873-1:2014

(60 ± 2) °C or (85 ± 2) °C. 6.4 Laboratory glassware, steel and stainless-steel plates and sand blasted glass plates shall be cleaned by washing with a biodegradable laboratory detergent, followed by exposing to either hydrochloric acid solution (5.2.2) (except for stainless steel) or nitric acid solution (5.2.4) for 2 to 3 days and finally by thoroughly rinsing with test water (5.1.2). Drain the plates and dry them in a hot air cabinet. 7 Test samples and test pieces 7.1 Sampling, transport and storage of test samples Sample products in accordance with the relevant product standards or national regulations where applicable. Ensure that the surface of test pieces intended to come into contact with test water shall be free from adhesive tape, labels, ink or pencil marks. Care shall be taken to ensure that the transport and storage conditions shall not influence the test results. SIST EN 12873-1:2014
...