prEN 4473
(Main)Aerospace series - Aluminium pigmented organic coatings for fasteners - Technical specification
Aerospace series - Aluminium pigmented organic coatings for fasteners - Technical specification
This document defines the performance requirements for aluminium pigmented organic coatings to be applied on titanium, titanium alloys, nickel or cobalt based alloys and corrosion resistant steels.
This specification does not cover electrical bonding and lightning strike applications of this coating. Additional qualification tests will be agreed with the OEM upon qualification.
NOTE This coating is not recommended for use on non-corrosion resistant steel fasteners.
Luft und Raumfahrt - Aluminium pigmenttete organische Beschichtungen für Verbindungselemente - Technische Lieferbedingungen
Série aérospatiale - Revêtements alumino-organiques pour éléments de fixation - Spécification technique
Le présent document définit les exigences de performances pour les revêtements alumino-organiques à appliquer sur le titane, les alliages de titane, les alliages base nickel ou cobalt et les aciers résistant à la corrosion.
Cette spécification ne couvre pas les applications de ces revêtements liées à la métallisation et à la foudre. Les essais de qualification supplémentaires doivent être convenus en accord avec l’OEM au moment de la qualification.
NOTE Il n’est pas recommandé d’utiliser ces revêtements sur les éléments de fixation en acier non résistant à la corrosion.
Aeronavtika - Organski premazi, pigmentirani z aluminijem, za vezne elemente - Tehnična specifikacija
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 4473:2023
01-maj-2023
Aeronavtika - Organski premazi, pigmentirani z aluminijem, za vezne elemente -
Tehnična specifikacija
Aerospace series - Aluminium pigmented organic coatings for fasteners - Technical
specification
Luft und Raumfahrt - Aluminium pigmenttete organische Beschichtungen für
Verbindungselemente - Technische Lieferbedingungen
Série aérospatiale - Revêtements alumino-organiques pour éléments de fixation -
Spécification technique
Ta slovenski standard je istoveten z: prEN 4473
ICS:
49.025.20 Aluminij Aluminium
49.030.01 Vezni elementi na splošno Fasteners in general
49.040 Prevleke in z njimi povezani Coatings and related
postopki, ki se uporabljajo v processes used in aerospace
letalski in vesoljski industriji industry
oSIST prEN 4473:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 4473:2023
---------------------- Page: 2 ----------------------
oSIST prEN 4473:2023
DRAFT
EUROPEAN STANDARD
prEN 4473
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2023
ICS 49.040 Will supersede EN 4473:2010
English Version
Aerospace series - Aluminium pigmented organic coatings
for fasteners - Technical specification
Série aérospatiale - Revêtements alumino organiques Luft und Raumfahrt - Aluminium pigmenttete
pour pièces de fixations - Spécification technique organische Beschichtungen für Verbindungselemente -
Technische Lieferbedingungen
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4473:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 4473:2023
prEN 4473:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Technical requirements . 6
4.1 General. 6
4.2 Classification. 6
4.3 Product composition and application . 6
4.4 Coating performance . 6
Annex A (normative) Performance requirements .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.