EN ISO 2812-1:2017

Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-1:2017)

ISO 2812-1:2017 specifies general methods for determining the resistance of an individual-layer or multi-layer system of coating materials to the effects of liquids, other than water, or paste-like products (included implicitly in test liquids mentioned in the text).
These methods enable the testers to determine the effects of the test liquid on the coating and, if necessary, to assess the damage to the substrate.

Beschichtungsstoffe - Bestimmung der Beständigkeit gegen Flüssigkeiten - Teil 1: Eintauchen in Flüssigkeiten außer Wasser (ISO 2812-1:2017)

Dieses Dokument legt allgemeine Verfahren zum Bestimmen der Beständigkeit einer einzelnen Schicht oder eines Mehrschichtsystems aus Beschichtungsstoffen gegen die Einwirkung von Flüssigkeiten außer Wasser oder pastenförmigen Produkten (im weiteren Text im Begriff Flüssigkeiten enthalten) fest.
Diese Verfahren ermöglichen es den Prüfern, die Wirkung der Prüfflüssigkeit auf die Beschichtung und, falls notwendig, die Schädigung des Substrates zu beurteilen.

Peintures et vernis - Détermination de la résistance aux liquides - Partie 1: Immersion dans des liquides autres que l'eau (ISO 2812-1:2017)

L'ISO 2812-1 :2017 spécifie des méthodes générales de détermination de la résistance d'un système de revêtement monocouche ou multicouche à l'action de liquides autres que l'eau ou de produits pâteux (compris implicitement dans les liquides d'essai mentionnés ci-après dans le texte).
Ces méthodes permettent aux opérateurs d'évaluer l'effet du liquide d'essai sur le revêtement et, si nécessaire, d'évaluer la détérioration du subjectile.

Barve in laki - Ugotavljanje odpornosti proti tekočinam - 1. del: Metoda s potapljanjem v tekočine, razen v vodo (ISO 2812-1:2017)

Ta dokument določa splošne metode za ugotavljanje odpornosti posamezne plasti ali večplastnih premaznih sistemov proti učinkom tekočin, ki niso voda, ali izdelkov, podobnih pasti (posredno vključenih v preskusne tekočine, omenjene v besedilu).
Te metode preskuševalcem omogočajo določiti učinke preskusne tekočine na premaz in po potrebi oceniti škodo na podlagi.

General Information

• Status: Published
• Publication Date: 12-Dec-2017
• Withdrawal Date: 29-Jun-2018
• ICS: 87.040 - Paints and varnishes
• Technical Committee: CEN/TC 139 - Paints and varnishes
• Drafting Committee: CEN/TC 139 - Paints and varnishes
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 13-Dec-2017
• Completion Date: 13-Dec-2017
• Ref Project: SIST EN ISO 2812-1:2018 - Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-1:2017)

Relations

• Replaces: EN ISO 2812-1:2007 - Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in liquids other than water (ISO 2812-1:2007)
• Effective Date: 20-Dec-2017

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2018
1DGRPHãþD
SIST EN ISO 2812-1:2007
%DUYHLQODNL8JRWDYOMDQMHRGSRUQRVWLSURWLWHNRþLQDPGHO0HWRGDV
SRWDSOMDQMHPYWHNRþLQHUD]HQYYRGR,62
Paints and varnishes - Determination of resistance to liquids - Part 1: Immersion in
liquids other than water (ISO 2812-1:2017)
Beschichtungsstoffe - Bestimmung der Beständigkeit gegen Flüssigkeiten - Teil 1:
Eintauchen in Flüssigkeiten außer Wasser (ISO 2812-1:2017)
Peintures et vernis - Détermination de la résistance aux liquides - Partie 1: Immersion
dans des liquides autres que l'eau (ISO 2812-1:2017)
Ta slovenski standard je istoveten z: EN ISO 2812-1:2017
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 2812-1
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2017
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 2812-1:2007
English Version
Paints and varnishes - Determination of resistance to
liquids - Part 1: Immersion in liquids other than water (ISO
2812-1:2017)
Peintures et vernis - Détermination de la résistance Beschichtungsstoffe - Bestimmung der Beständigkeit
aux liquides - Partie 1: Immersion dans des liquides gegen Flüssigkeiten - Teil 1: Eintauchen in
autres que l'eau (ISO 2812-1:2017) Flüssigkeiten außer Wasser (ISO 2812-1:2017)
This European Standard was approved by CEN on 9 December 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2812-1:2017 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 2812-1:2017) has been prepared by Technical Committee ISO/TC 35 “Paints
and varnishes” in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2018 and conflicting national standards shall be
withdrawn at the latest by June 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 2812-1:2007.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 2812-1:2017 has been approved by CEN as EN ISO 2812-1:2017 without any
modification.
INTERNATIONAL ISO
STANDARD 2812-1
Third edition
2017-11
Paints and varnishes — Determination
of resistance to liquids —
Part 1:
Immersion in liquids other than water
Peintures et vernis — Détermination de la résistance aux liquides —
Partie 1: Immersion dans des liquides autres que l'eau
Reference number
ISO 2812-1:2017(E)
©
ISO 2017
ISO 2812-1:2017(E)
© ISO 2017, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. [phone]
Fax [phone]
[e-mail]
www.iso.org
ii © ISO 2017 – All rights reserved

ISO 2812-1:2017(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
6 Test liquids . 2
7 Sampling . 2
8 Test pieces . 2
8.1 Shape and material . 2
8.1.1 Panels . 2
8.1.2 Rods . . 2
8.2 Preparation and coating . . 2
8.2.1 Test panels . 2
8.2.2 Test rods . 3
8.3 Coating thickness . 3
9 Procedure. 3
9.1 Conditioning of the test panels or rods . 3
9.2 Test liquids with high electrical conductivity . 3
9.3 Determination . 3
9.3.1 Method A — Single-phase liquid . 3
9.3.2 Method B — Two-phase liquid . 4
10 Evaluation . 4
11 Precision . 5
12 Test report . 5
Annex A (informative) Examples of test liquids . 6
Bibliography . 8
ISO 2812-1:2017(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, SC 9, General test
methods for paints and varnishes.
This third edition cancels and replaces the second edition (ISO 2812-1:2007), of which it constitutes a
minor revision. The changes compared to the previous edition are as follows: the CAS numbers have
been added to the reagents listed in Annex A and a terms and definitions clause has been added.
A list of all parts in the ISO 2812 series can be found on the ISO website.
iv © ISO 2017 – All rights reserved

INTERNATIONAL STANDARD ISO 2812-1:2017(E)
Paints and varnishes — Determination of resistance to
liquids —
Part 1:
Immersion in liquids other than water
1 Scope
This document specifies general methods for determining the resistance of an individual-layer or
multi-layer system of coating materials to the effects of liquids, other than water, or paste-like products
(included implicitly in test
...