iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 15376:2011

(Main)

Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods

Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods

This European Standard specifies requirements and test methods for marketed and delivered ethanol to be used as an extender for automotive fuel for petrol engine vehicles in accordance with the requirements of EN 228.
NOTE 1   This document gives all relevant characteristics, requirements and test methods for (bio)ethanol, which are known at this time to be necessary to define the product to be used up to a maximum 10 % (V/V) blending component for automotive petrol fuel. The requirements need to be restudied if the percentage or use is expanded beyond 10 % volume.
NOTE 2   For the purposes of this document, the term % (m/m) and % (V/V) are used to represent the mass fraction, µ, and the volume fraction respectively.

Kraftstoffe für Kraftfahrzeuge - Ethanol zur Verwendung als Blendkomponente in Ottokraftstoff - Anforderungen und Prüfverfahren

Diese Europäische Norm legt Anforderungen und Prüfverfahren für angeliefertes bzw. vermarktetes Ethanol fest, das als Streckmittel für Kraftstoffe zum Einsatz in Kraftfahrzeugen mit Ottomotor, in Übereinstimmung mit den Anforderungen von EN 228, Verwendung findet. ANMERKUNG 1 Dieses Dokument gibt alle relevanten Kenndaten, Anforderungen und Prüfverfahren für (Bio)Ethanol vor, die zum gegenwärtigen Zeitpunkt für die Festlegung der Produkteigenschaften für den Einsatz als Blendkomponente bis zu einem Volumenanteil von bis zu 10 % (V/V) in Ottokraftstoff als notwendig bekannt sind. Diese Anforderungen bedürfen einer erneuten Untersuchung, sofern der Anteil bzw. die Verwendung einen Volumenanteil von 10 % (V/V) übersteigt. ANMERKUNG 2 Für die Zwecke dieses Dokuments wird zur Angabe des Massenanteils einer Substanz, μ, der Ausdruck „% (m/m)“ und für den Volumenanteil einer Substanz, φ, der Ausdruck „% (V/V)“ verwendet.

Carburants pour automobiles - Ethanol comme base de mélange à l'essence - Exigences et méthodes d'essais

Le présent document prescrit des exigences et des méthodes d’essais pour l’éthanol mis sur le marché et livré pour être utilisé comme composant du carburant automobile pour véhicules à moteur à essence conformément aux exigences de l'EN 228.
NOTE 1   Le présent document donne l’ensemble des caractéristiques, des exigences et méthodes d'essai applicables à l’(au) (bio)éthanol qui sont actuellement reconnues comme nécessaires pour définir le produit destiné à être utilisé en mélange avec l’essence automobiles à hauteur de 10 % (V/V) maximum. Pour une teneur plus élevée ou un usage au-delà de 10 % en volume, les exigences doivent être réétudiées.
NOTE 2   Dans le cadre de ce document, les expressions "% (m/m)" et "% (V/V)" sont utilisées pour désigner respectivement les fractions massiques,µ, et les fractions volumiques, φ.

Goriva za motorna vozila - Etanol kot komponenta za dodajanje motornemu bencinu - Zahteve in preskusne metode

Ta evropski standard določa zahteve za preskusne metode za etanol, ki je na trgu ali se dobavlja in ki se uporablja kot polnilo pri gorivih za motorna vozila, v skladu z zahtevami iz EN 228.

General Information

Status
Withdrawn
Publication Date
01-Feb-2011
Withdrawal Date
14-Oct-2014
ICS
71.080.60 - Alcohols. Ethers
75.160.20 - Liquid fuels
Technical Committee
CEN/TC 19 - Petroleum products, lubricants and related products
Drafting Committee
CEN/TC 19/WG 21 - Specification for unleaded petrol
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
15-Oct-2014
Directive
98/70/EC - Quality of petrol and diesel fuels (Dir. 93/12/EEC amendment)
Mandate
M/344 - Mandate to CEN on Ethanol as an oxygen extender to gasoline
Ref Project
SIST EN 15376:2011 - Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods

Relations

Replaces
EN 15376:2007+A1:2009 - Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods
Effective Date
05-Feb-2011
Replaced By
EN 15376:2014 - Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods
Effective Date
22-Oct-2014
Revised
EN 15376:2007 - Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods
Effective Date
06-May-2009

Buy Standard

EN 15376:2011EN 15376:2011
PreviousNext
Standard
EN 15376:2011
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Goriva za motorna vozila - Etanol kot komponenta za dodajanje motornemu bencinu - Zahteve in preskusne metodeKraftstoffe für Kraftfahrzeuge - Ethanol zur Verwendung als Blendkomponente in Ottokraftstoff - Anforderungen und PrüfverfahrenCarburants pour automobiles - Ethanol comme base de mélange à l'essence - Exigences et méthodes d'essaisAutomotive fuels - Ethanol as a blending component for petrol - Requirements and test methods75.160.20Liquid fuels71.080.60Alkoholi. EtriAlcohols. EthersICS:Ta slovenski standard je istoveten z:EN 15376:2011SIST EN 15376:2011en,de01-april-2011SIST EN 15376:2011SLOVENSKI
STANDARDSIST EN 15376:2008+A1:20091DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15376
February 2011 ICS 71.080.60; 75.160.20 Supersedes EN 15376:2007+A1:2009English Version
Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods
Carburants pour automobiles - Ethanol comme base de mélange à l'essence - Exigences et méthodes d'essais
Kraftstoffe für Kraftfahrzeuge - Ethanol zur Verwendung als Blendkomponente in Ottokraftstoff - Anforderungen und Prüfverfahren This European Standard was approved by CEN on 24 December 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15376:2011: ESIST EN 15376:2011

The major updates of this second version concern the inclusion of newly developed methods for determination of appearance and of the content of oxygenates, water, involatile material, sulfate, inorganic chloride, copper and phosphorus. All of these methods were under development at the time of publication of the former version. In addition some alignment on the units in terms of mass/mass has been developed. An electrical conductivity test method has also been developed on the basis of a DIN test method [5] in order to adequately limit the strong acidity and the base alkalinity of the product, which cannot be sufficiently determined via pHe [6]. The former version gave all relevant characteristics, requirements and test methods for (bio)ethanol, which were known at that time to be necessary to define the product to be used up to a maximum 5 % (V/V) blending component for automotive petrol fuel. With the actual document the percentage of use is expanded to allow use at percentages up to 10 % (V/V) and the requirements are updated accordingly. Now that a test method is available a sulfate limit has also been set. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 15376:2011
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 15491:2021(Main)
Ethanol as a blending component for petrol - Determination of total acidity - Colour indicator titration method
SIST EN 15491:2022

This document specifies a method for determining the total acidity, calculated as acetic acid, of ethanol to be used in petrol blends. It is applicable to ethanol having total acid contents of between 0,003 % (m/m) and 0,015 % (m/m).
NOTE   For the purposes of this document, the terms "% (m/m)" and "% (V/V)" are used to represent the mass fraction and the volume fraction, respectively.
WARNING - Use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to take appropriate measures to ensure the safety and health of personnel prior to the application of the document, and to fulfil statutory and regulatory restrictions for this purpose.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 15993:2018(Main)
Automotive fuels - Ethanol (E85) automotive fuel - Background to the parameters required and their respective limits and determination
SIST-TP CEN/TR 15993:2018

This Technical Report explains the requirements and test methods for marketed and delivered ethanol (E85) automotive fuel according to EN 15293. It provides background information on the final text of the draft European standard and gives guidance and explanations to the producers, blenders, marketers and users of ethanol (E85) automotive fuel.
It is applicable to ethanol (E85) for use in spark ignition engine vehicles designed to run on ethanol (E85). Ethanol (E85) is a mixture of nominally 85 % ethanol and 15 % petrol, but it also includes the possibility of having different 'seasonal grades' containing 50 % or more ethanol.
NOTE 1   This document is directly related to prEN 15293:2017 and will be updated if further revisions to the standard take place.
NOTE 2   For the purposes of this document, the terms "% (m/m)" and "% (V/V)" are used to represent the mass fraction, µ, and the volume fraction, φ, respectively.

  • Technical report
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16136:2015(Main)
Automotive fuels - Determination of manganese and iron content in unleaded petrol - Inductively coupled plasma optical emission spectrometry (ICP OES) method
SIST EN 16136:2015

This European Standard specifies a method based on inductively coupled plasma optical emission spectrometry (ICP OES) for the determination of manganese content from about 0,5 mg/l to about 7,5 mg/l and of iron content from about 1,4 mg/l to about 6,0 mg/l in unleaded petrol containing up to 3,7 % (m/m) oxygen.
WARNING - The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.
NOTE 1   Manganese as MMT and iron as ferrocene are added to petrol to increase anti-knock properties.
NOTE 2   Solutions of MMT in petrol are unstable when exposed to light. Low and erratic results are expected if petrol samples are exposed to light prior the analysis.
Iron and manganese contents higher than 6,0 mg/l and 7,5 mg/l respectively may be measured after preliminary dilution of the sample with a suitable solvent. However, the precision has not been established for such a procedure. Further work regarding automotive ethanol (E85) fuel is on-going in CEN.
NOTE 3   For the purposes of this European Standard, the terms "% (m/m)" and "% (V/V)" are used to represent the mass fraction (µ) and the volume fraction (φ) of a material respectively.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15376:2014(Main)
Automotive fuels - Ethanol as a blending component for petrol - Requirements and test methods
SIST EN 15376:2014

This European Standard specifies requirements and test methods for marketed and delivered ethanol to be used as an extender for automotive fuel for petrol engine vehicles in accordance with the requirements of EN 228 [5]. It is applicable to ethanol used for blending at all levels up to and including 85 % (V/V).
NOTE   For the purposes of this document, the term “% (m/m)” and “% (V/V)” are used to represent the mass fraction, µ, and the volume fraction, φ, respectively.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15492:2012(Main)
Ethanol as a blending component for petrol - Determination of inorganic chloride and sulfate content - Ion chromatographic method
SIST EN 15492:2012

This European Standard specifies an ion chromatographic (IC) method for the determination of inorganic chloride content in ethanol from about 1 mg/kg to about 30 mg/kg and of sulfate content in ethanol from about 1 mg/kg to about 20 mg/kg.
NOTE   Sulfate content can be determined from 0,5 mg/kg to 1,0 mg/kg. However, the precision was not established as no samples with sulfate content in this range were included in the interlaboratory test.
WARNING - Use of this method may involve hazardous equipment, materials and operations. This method does not purport to address to all of the safety problems associated with its use, but it is the responsibility of the user to search and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15486:2007(Main)
Ethanol as a blending component for petrol - Determination of sulfur content - Ultraviolet fluorescence method
SIST EN 15486:2007

This document specifies an ultraviolet (UV) fluorescence test method for the determination of the sulfur content of ethanol from 5 mg/kg to 20 mg/kg. Other products may be analysed and higher sulfur contents may be determined according to this test method, however, no precision data for products other than ethanol and for results outside the specified range have been established for this document. Halogens interfere with this detection technique at concentrations above approximately 3 500 mg/kg.
NOTE   For the purposes of this document, the terms “% (m/m)” and “% (V/V)” are used to represent the mass fraction and the volume fraction of a material respectively.
WARNING — The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15487:2007(Main)
Ethanol as a blending component for petrol - Determination of phosphorus content - Ammonium molybdate spectrometric method
SIST EN 15487:2007

This standard specifies a procedure for the determination of phosphorus content measured as orthophosphate, in ethanol from 0,15 mg/l to 1,50 mg/l by ammonium molybdate spectrometric method. The phosphorus content is determined in aqueous solution after dissolution of the evaporation residue of the ethanol sample.
WARNING — Use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15489:2007(Main)
Ethanol as a blending component for petrol - Determination of water content - Karl Fischer coulometric titration method
SIST EN 15489:2007

This European Standard specifies a method for the direct determination of water in ethanol to be used in gasoline blends. It is applicable to ethanol having water contents in the range 0,039 % (m/m) to 0,500 % (m/m).
NOTE   For the purposes of this document, the term “% (m/m)” is used to represent the mass fraction.
WARNING — Use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15484:2007(Main)
Ethanol as a blending component for petrol - Determination of inorganic chloride - Potentiometric method
SIST EN 15484:2007

This standard specifies a potentiometric method for the determination of inorganic chloride content in ethanol from 4 mg/l to 30 mg/l. The chloride content is determined in aqueous solution after dissolution of the evaporation residue of the ethanol sample.
WARNING — Use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.
NOTE   For the purposes of this document, the terms “% (m/m)” and “% (V/V)” are used to represent respectively the mass fraction and the volume fraction.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15488:2007(Main)
Ethanol as a blending component for petrol - Determination of copper content - Graphite furnace atomic absorption spectrometric method
SIST EN 15488:2007

This standard specifies a procedure for the determination of copper content in ethanol from 0,07 mg/kg to 0,20 mg/kg using graphite furnace atomic absorption spectrometry.
NOTE   For the purpose of this document, the terms “% (m/m)” and "% (V/V)" are used to represent the mass fraction, respectively the volume fraction of a material.
WARNING — Use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day