EN 14640:2005

Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification

This document specifies requirements for classification of solid wires and rods for fusion welding of copper and copper alloys. The classification of the solid wires and rods is based on their chemical composition.

Schweißzusätze - Massivdrähte und -stäbe zum Schmelzschweißen von Kupfer und Kupferlegierungen - Einteilung

Dieses Dokument legt Anforderungen für die Einteilung von Massivdrähten und Massivstäben zum Schmelz-
schweißen von Kupfer und Kupferlegierungen fest. Die Einteilung der Massivdrähte und Massivstäbe erfolgt
nach ihrer chemischen Zusammensetzung.

Produits consommables pour le soudage - Fils pleins et baguettes pleines pour le soudage par fusion du cuivre et des alliages de cuivre - Classification

Le présent document spécifie les exigences relatives à la classification des fils pleins et des baguettes pleines
pour le soudage par fusion du cuivre et des alliages de cuivre. La classification des fils pleins et des baguettes
pleines est basée sur leur composition chimique.

Dodajni materiali za varjenje - Masivne žice in palice za talilno varjenje bakra in bakrovih zlitin – Razvrstitev

General Information

• Status: Withdrawn
• Publication Date: 19-Apr-2005
• Withdrawal Date: 21-Apr-2009
• ICS: 25.160.20 - Welding consumables
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/WG 3 - Welding consumables
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 22-Apr-2009
• Completion Date: 22-Apr-2009
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN 14640:2005 - Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification

Relations

• Replaced By: EN ISO 24373:2009 - Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification (ISO 24373:2008)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Dodajni materiali za varjenje - Masivne žice in palice za talilno varjenje bakra in bakrovih zlitin – RazvrstitevSchweißzusätze - Massivdrähte und -stäbe zum Schmelzschweißen von Kupfer und Kupferlegierungen - EinteilungProduits consommables pour le soudage - Fils pleins et baguettes pleines pour le soudage par fusion du cuivre et des alliages de cuivre - ClassificationWelding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification77.120.30Baker in bakrove zlitineCopper and copper alloys25.160.20Potrošni material pri varjenjuWelding consumablesICS:Ta slovenski standard je istoveten z:EN 14640:2005SIST EN 14640:2005en01-julij-2005SIST EN 14640:2005SLOVENSKI
STANDARD



SIST EN 14640:2005



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14640April 2005ICS 25.160.20English versionWelding consumables - Solid wires and rods for fusion weldingof copper and copper alloys - ClassificationProduits consommables pour le soudage - Fils pleins etbaguettes pleines pour le soudage par fusion du cuivre etdes alliages de cuivre - ClassificationSchweißzusätze - Massivdrähte und -stäbe zumSchmelzschweißen von Kupfer und Kupferlegierungen -EinteilungThis European Standard was approved by CEN on 15 March 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14640:2005: ESIST EN 14640:2005



EN 14640:2005 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Classification.5 4 Symbols and requirements.5 5 Mechanical properties of the weld metal.7 6 Chemical analysis.7 7 Rounding off procedure.7 8 Retest.7 9 Technical delivery conditions.7 10 Designation.7 Annex A (informative)
Corresponding national classifications.9 Bibliography.11
SIST EN 14640:2005



EN 14640:2005 (E) 3 Foreword This document (EN 14640:2005) has been prepared by Technical Committee CEN/TC 121 “Welding”, the secretariat of which is held by DIN. This European Standard shall be given the status of a nationa
...