Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification

This document specifies requirements for classification of solid wires and rods for fusion welding of copper and copper alloys. The classification of the solid wires and rods is based on their chemical composition.

Schweißzusätze - Massivdrähte und -stäbe zum Schmelzschweißen von Kupfer und Kupferlegierungen - Einteilung

Dieses Dokument legt Anforderungen für die Einteilung von Massivdrähten und Massivstäben zum Schmelz-
schweißen von Kupfer und Kupferlegierungen fest. Die Einteilung der Massivdrähte und Massivstäbe erfolgt
nach ihrer chemischen Zusammensetzung.

Produits consommables pour le soudage - Fils pleins et baguettes pleines pour le soudage par fusion du cuivre et des alliages de cuivre - Classification

Le présent document spécifie les exigences relatives a la classification des fils pleins et des baguettes pleines
pour le soudage par fusion du cuivre et des alliages de cuivre. La classification des fils pleins et des baguettes
pleines est basée sur leur composition chimique.

Dodajni materiali za varjenje - Masivne žice in palice za talilno varjenje bakra in bakrovih zlitin – Razvrstitev

General Information

Status
Withdrawn
Publication Date
30-Jun-2005
Withdrawal Date
15-Jul-2012
Technical Committee
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
16-Jul-2012
Due Date
08-Aug-2012
Completion Date
16-Jul-2012

Relations

Buy Standard

Standard
EN 14640:2005
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Dodajni materiali za varjenje - Masivne žice in palice za talilno varjenje bakra in bakrovih zlitin – RazvrstitevSchweißzusätze - Massivdrähte und -stäbe zum Schmelzschweißen von Kupfer und Kupferlegierungen - EinteilungProduits consommables pour le soudage - Fils pleins et baguettes pleines pour le soudage par fusion du cuivre et des alliages de cuivre - ClassificationWelding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification77.120.30Baker in bakrove zlitineCopper and copper alloys25.160.20Potrošni material pri varjenjuWelding consumablesICS:Ta slovenski standard je istoveten z:EN 14640:2005SIST EN 14640:2005en01-julij-2005SIST EN 14640:2005SLOVENSKI
STANDARD



SIST EN 14640:2005



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14640April 2005ICS 25.160.20English versionWelding consumables - Solid wires and rods for fusion weldingof copper and copper alloys - ClassificationProduits consommables pour le soudage - Fils pleins etbaguettes pleines pour le soudage par fusion du cuivre etdes alliages de cuivre - ClassificationSchweißzusätze - Massivdrähte und -stäbe zumSchmelzschweißen von Kupfer und Kupferlegierungen -EinteilungThis European Standard was approved by CEN on 15 March 2005.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2005 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14640:2005: ESIST EN 14640:2005



EN 14640:2005 (E) 2 Contents Page Foreword.3 Introduction.4 1 Scope.5 2 Normative references.5 3 Classification.5 4 Symbols and requirements.5 5 Mechanical properties of the weld metal.7 6 Chemical analysis.7 7 Rounding off procedure.7 8 Retest.7 9 Technical delivery conditions.7 10 Designation.7 Annex A (informative)
Corresponding national classifications.9 Bibliography.11
SIST EN 14640:2005



EN 14640:2005 (E) 3 Foreword This document (EN 14640:2005) has been prepared by Technical Committee CEN/TC 121 “Welding”, the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2005, and conflicting national standards shall be withdrawn at the latest by October 2005. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. SIST EN 14640:2005



EN 14640:2005 (E) 4 Introduction For copper welding consumables there is no unique relationship between the product form (solid wire or rod) and the welding process used (e.g. gas shielded metal arc welding, gas tungsten arc welding, plasma arc or other welding processes). For this reason the solid wires or rods may be classified on the basis of any of the above product forms and can be used as appropriate, for more than one of the above processes. SIST EN 14640:2005



EN 14640:2005 (E) 5
1 Scope This document specifies requirements for classification of solid wires and rods for fusion welding of copper and copper alloys. The classification of the solid wires and rods is based on their chemical composition.
2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN ISO 544, Welding consumables — Technical delivery conditions for welding filler materials — Type of product, dimensions, tolerances and markings (ISO 544:2003). EN ISO 14344, Welding and allied processes — Flux and gas shielded electrical welding processes — Procurement guidelines for consumables (ISO 14344:2002). ISO 31-0:1992, Quantities and units — Part 0: General principles. 3 Classification The classification is divided into two parts:
a) the first part indicates the product form being solid wires or rods, see 4.1; b) the second part gives a numerical symbol indicating the chemical composition of the solid wire or rod, see Table 1. 4 Symbols and requirements 4.1 Symbols for the product form The symbol for the solid wire and rod shall be S. NOTE One product form may be used for more than one welding process. 4.2 Symbol for the chemical composition The numerical symbol in Table 1 indicates the chemical composition of a solid wire or rod, determined under conditions given in Clause 6. NOTE 1 In addition the chemical symbol may be used. SIST EN 14640:2005



EN 14640:2005 (E) 6 Table 1 — Symbol for the chemical composition of solid wires and rods Alloy symbols Chemical composition in % (m/m)
a
b Numerical Chemical Cu Al Fe Mn Ni
incl.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.