EN ISO 15883-3:2006
(Main)Washer-disinfectors - Part 3: Requirements and tests for washer-disinfectors employing thermal disinfection for human waste containers (ISO 15883-3:2006)
Washer-disinfectors - Part 3: Requirements and tests for washer-disinfectors employing thermal disinfection for human waste containers (ISO 15883-3:2006)
This part of prEN ISO 15883 specifies particular requirements for washer-disinfectors (WD) that are intended to be used for emptying, flushing, cleaning and thermal disinfection of containers used to hold human waste for disposal by one operating cycle.
The requirements of this part apply in addition to the general requirements specified in prEN ISO 15883-1.
Reinigungs-Desinfektionsgeräte - Teil 3: Anforderungen an und Prüfverfahren für Reinigungs-Desinfektionsgeräten mit thermischer Desinfektion für Behälter für menschliche Ausscheidungen (ISO 15883-3:2006)
Dieser Teil von ISO 15883 legt besondere Anforderungen an Reinigungs-Desinfektionsgeräte (RDG) fest, die für die Entleerung, Ausspülung, Reinigung und thermische Desinfektion von Behältern für menschliche Ausscheidungen zur Behandlung innerhalb eines Betriebszyklus angewandt werden.
Die Anforderungen in diesem Teil gelten zusätzlich zu den in ISO 15883 1:2006 festgelegten allgemeinen Anforderungen.
Laveurs désinfecteurs - Partie 3: Exigences et essais pour laveurs désinfecteurs destinés à la désinfection thermique de récipients à déjections humaines (ISO 15883-3:2006)
La présente partie du prEN ISO 15883 détermine les exigences spécifiques pour les laveurs-désinfecteurs destinés à être utilisés pour vider, rincer, nettoyer et désinfecter thermiquement les récipients employés pour contenir les déjections humaines afin de pouvoir les réutiliser après un cycle standard.
Les exigences de cette partie s'ajoutent à celles spécifiées dans le prEN ISO 15883 1.
Čistilno-dezinfekcijske naprave - 3. del: Zahteve in preskusi za čistilno-dezinfekcijske naprave s toplotno dezinfekcijo za zbiralnike človeških izločkov (ISO 15883-3:2006)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2006
ýLVWLOQRGH]LQIHNFLMVNHQDSUDYHGHO =DKWHYHLQSUHVNXVL]DþLVWLOQR
GH]LQIHNFLMVNHQDSUDYHVWRSORWQRGH]LQIHNFLMR]D]ELUDOQLNHþORYHãNLKL]ORþNRY
,62
Washer-disinfectors - Part 3: Requirements and tests for washer-disinfectors employing
thermal disinfection for human waste containers (ISO 15883-3:2006)
Reinigungs-Desinfektionsgeräte - Teil 3: Anforderungen an und Prüfverfahren für
Reinigungs-Desinfektionsgeräten mit thermischer Desinfektion für Behälter für
menschliche Ausscheidungen (ISO 15883-3:2006)
Laveurs désinfecteurs - Partie 3: Exigences et essais pour laveurs désinfecteurs
destinés a la désinfection thermique de récipients a déjections humaines (ISO 15883-
3:2006)
Ta slovenski standard je istoveten z: EN ISO 15883-3:2006
ICS:
11.080.10 Sterilizacijska oprema Sterilizing equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 15883-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2006
ICS 11.080.10
English Version
Washer-disinfectors - Part 3: Requirements and tests for
washer-disinfectors employing thermal disinfection for human
waste containers (ISO 15883-3:2006)
Laveurs désinfecteurs - Partie 3: Exigences et essais pour Reinigungs-Desinfektionsgeräte - Teil 3: Anforderungen an
laveurs désinfecteurs destinés à la désinfection thermale und Prüfungen von Reinigungs-Desinfektionsgeräten mit
de récipients à déjections humaines (ISO 15883-3:2006) thermischer Desinfektion für Behälter für menschliche
Ausscheidungen (ISO 15883-3:2006)
This European Standard was approved by CEN on 16 March 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15883-3:2006: E
worldwide for CEN national Members.
Foreword
This document (EN ISO 15883-2:2006) has been prepared by Technical Committee CEN/TC 102
"Sterilizers for medical purposes", the secretariat of which is held by DIN, in collaboration with
Technical Committee ISO/TC 198 "Sterilization of health care products".
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2006, and conflicting national standards
shall be withdrawn at the latest by October 2006.
This document has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
ANNEX ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 93/42/EEC on medical devices
This European Standard has been prepared under a mandate given to CEN by the European
Commission and the European Free Trade Association to provide a means of conforming to
Essential Requirements of the New Approach Directive 93/42/EEC.
Once this standard is cited in the Official Journal of the European Communities under that Directive
and has been implemented as a national standard in at least one Member State, compliance with
the clauses of this standard given in Table ZA.1 confers, within the limits of the scope of this
standard, a presumption of conformity with the corresponding Essential Requirements of that
Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Directive 93/42/EEC
on medical devices
Clauses/subclauses of Essential requirements (ERs) Qualifying remarks/Notes
this
of EU Directive 93/42/EEC
International Standard
4.1 1, 2, 3,4, 5, 6, 7.1, 7.2, 7.3, 7.5, 7.6, 8.1, 9.1, The WD shall comply with the
9.2, 9.3, 12.1, 12.5, 12.6, 12.7.1, 12.7.2, 12.7.3, requirements of ISO 15883-1:—
12.7.5, 13.1, 13.3, 13.4, 13.6
4.2 7.3, 8.1
4.3 2, 7.2, 7.5, 8.1, 9.1
4.4 3, 8.1
4.5 3, 8.1
4.6 3, 8.1
4.7 3, 8.1
5.1 3, 8.1
5.2 3, 8.1
5.3 7.2, 7.5, 8.1
6.1 1, 2, 3, 6, 7.1, 8.1 Testing for conformity according
to ISO 15883-1:—
6.2 7.2, 7.5, 8.1, 91
Table ZA.1 (continued)
Clauses/subclauses of this Essential requirements (ERs) Qualifying remarks/Notes
European Standard of EU Directive 93/42/EEC
6.3 3, 8.1
6.4 3, 8.1
6.5.1, 6.5.2 2, 3, 7.2, 7.5, 8.1, 9.1
6.6 3, 8.1
7 9.1, 13.1, 13.3, 13.6
7 a) 9.1
7 g) 3, 8.1
8 1.3, 7.1, 7.2, 7.3, 8.1
8 c) 7.3
8 e) 3, 8.1
7.4, 8.2, 8.3, 8.4, 8.5, 8.6, 8.7, 10.1, not applicable
10.2, 10.3, Clause 11, 12.2, 12.3,
12.4, 12.7.4, 12.8, 13.5, 14
WARNING: Other requirements and other EU Directives may be applicable to the product(s) falling
within the scope of this standard.
INTERNATIONAL ISO
STANDARD 15883-3
First edition
2006-04-15
Washer-disinfectors —
Part 3:
Requirements and tests for washer-
disinfectors employing thermal
disinfection for human waste containers
Laveurs désinfecteurs —
Partie 3: Exigences et essais pour laveurs désinfecteurs destinés à la
désinfection thermale de récipients à déjections humaines
Reference number
ISO 15883-3:2006(E)
©
ISO 2006
ISO 15883-3:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
ISO 15883-3:2006(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope. 1
2 Normative references. 1
3 Terms and definitions. 1
4 Performance requirements . 2
4.1 General. 2
4.2 Chemical dosing systems. 2
4.3 Emptying. 3
4.4 Cleaning. 3
4.4.1 Flushing. 3
4.4.2 Washing. 3
4.4.3 Test requirements. 3
4.5 Disinfecting. 3
4.6 Rinsing. 4
4.7 Drying. 4
5 Mechanical and control requirements. 4
5.1 Instrumentation and control . 4
5.2 Process. 4
5.3 Venting, draining and purging. 4
5.4 Water quality. 5
6 Testing for conformity. 5
6.1 General. 5
6.2 Test for drain seal integrity. 5
6.3 Test for flushing of non-absorbent materials . 5
6.4 Test for flushing of absorbent material (toilet tissue) . 5
6.5 Test for loading/emptying of containers . 5
6.5.1 Automatic emptying . 5
6.5.2 Manual emptying. 6
6.6 Tests for soil removal from chamber walls, load carrier and load . 6
7 Information to be supplied by the manufacturer. 6
8 Information to be requested from the purchaser by the supplier of the WD. 7
Annex A (informative) Summary of test programmes . 8
Annex B (normative) Specification for toilet tissue for use in tests on washer-disinfectors for
human-waste containers. 9
Annex C (informative) Measurement of water absorbency of toilet tissue by the basket method. 10
Bibliography . 11
ISO 15883-3:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely wit
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.