EN 17736:2022
(Main)Entertainment technology - Specifications for design and manufacture of aluminium stage decks and frames
Entertainment technology - Specifications for design and manufacture of aluminium stage decks and frames
This document specifies the requirements for the design and manufacture of aluminium decks and frames used in the entertainment industry.
This document does not apply to scaffolding used as substructures in stage and studio environments in accordance with the EN 12810 series and the EN 12811 series or fairground rides in accordance with EN 13814-1.
Veranstaltungstechnik - Anforderungen an die Bemessung und Herstellung von Podesten und Zargen aus Aluminium
Dieses Dokument legt die Anforderungen an die Bemessung und Herstellung von in der Veranstaltungsbranche verwendeten Podesten und Zargen aus Aluminium fest.
Dieses Dokument ist nicht anzuwenden für die in Bühnen- und Studioumgebungen als Unterkonstruktion verwendeten Gerüste nach der Normenreihe EN 12810 und der Normenreihe EN 12811 sowie nicht für fliegende Bauten nach EN 13814 1.
Technologies du spectacle - Spécifications pour la conception et la fabrication de praticables de scène en aluminium
Le présent document spécifie les exigences pour la conception et la fabrication des praticables de scène en aluminium utilisés dans l'industrie du spectacle.
Le présent document ne s'applique pas aux échafaudages utilisés comme sous-structures dans les environnements scéniques et de studio conformément aux séries de normes EN 12810 et EN 12811, ni aux manèges de parcs d'attractions conformément à l'EN 13814-1.
Razvedrilna tehnologija - Specifikacije za projektiranje in izdelavo aluminijastih odrov in okvirjev
Ta dokument določa varnostne zahteve za načrtovanje, izbiro, proizvodnjo, predvideno uporabo ter preskušanje aluminijastih odrov in okvirjev, ki jih je mogoče uporabiti kot aluminijaste odrske ploščadi, naklone in stopnice, vključno z ograjami za prireditvene površine (odre) in tribune.
Ta dokument obravnava vsa večja tveganja, nevarne situacije in nevarne dogodke v zvezi z aluminijastimi odri in okvirji, kadar se uporabljajo v skladu s predvidenim namenom in pod pogoji pričakovane nepravilne uporabe, ki jih določi proizvajalec.
Če ti izdelki postanejo sestavni deli grajenega okolja, se pričakuje, da bodo upoštevane konstrukcijske zahteve.
Ta dokument se ne uporablja za odre, ki se uporabljajo kot podkonstrukcije v odrskem in studijskem okolju v skladu s skupino standardov EN 12810 in EN 12811, ter zabaviščne naprave v skladu s standardom EN 13814-1.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 17736:2023
01-januar-2023
Razvedrilna tehnologija - Specifikacije za projektiranje in izdelavo aluminijastih
odrov in okvirjev
Entertainment technology - Specifications for design and manufacture of aluminium
stage decks and frames
Veranstaltungstechnik - Anforderungen an die Bemessung und Herstellung von
Podesten und Zargen aus Aluminium
Technologies du spectacle - Spécifications pour la conception et la fabrication de
praticables de scène en aluminium
Ta slovenski standard je istoveten z: EN 17736:2022
ICS:
91.080.17 Aluminijaste konstrukcije Aluminium structures
97.200.10 Gledališka, odrska in Theatre, stage and studio
studijska oprema ter delovne equipment
postaje
SIST EN 17736:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 17736:2023
---------------------- Page: 2 ----------------------
SIST EN 17736:2023
EN 17736
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2022
EUROPÄISCHE NORM
ICS 97.200.10
English Version
Entertainment technology - Specifications for design and
manufacture of aluminium stage decks and frames
Technologies du spectacle - Spécifications pour la Veranstaltungstechnik - Anforderungen an die
conception et la fabrication de praticables de scène en Bemessung und Herstellung von Podesten und Zargen
aluminium aus Aluminium
This European Standard was approved by CEN on 12 September 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17736:2022 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 17736:2023
EN 17736:2022 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 List of significant hazards . 7
5 Engineering . 9
5.1 General . 9
5.2 Design . 9
5.3 Analysis . 9
5.3.1 General . 9
5.3.2 Load assumptions .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.