EN ISO 3830:1995

Petroleum products - Determination of lead content of gasoline - Iodine monochloride method (ISO 3830:1993)

Specifies a procedure for total lead as lead alkyls at concentrations between 0,026 g and 1,300 g of lead per litre. The method is not apllicable to gasoline containing manganese anti-knock additives.

Mineralölerzeugnisse - Bestimmung des Bleigehaltes von Ottokraftstoffen - Iodmonochlorid-Verfahren (ISO 3830:1993)

Diese Internationale Norm beschreibt ein Verfahren zur Bestimmung des Gesamt- bleigehaltes von Ottokraftstoffen, die Bleialkyle in Massenkonzentrationen an Blei zwischen 0,026 g/l und 1,300 g/l enthlaten. Diese Internationale Norm ist nicht anwendbar auf Ottokraftstoffe, die Manganverbindungen als Antiklopfadditive enthalten.

Produits pétroliers - Détermination de la teneur en plomb de l'essence - Méthode au monochlorure d'iode (ISO 3830:1993)

La présente Norme internationale prescrit une méthode pour la détermination de la teneur totale en plomb des essences contenant des alkyles de plomb à des concentrations comprises entre 0,026 g et 1,300 g de plomb par litre. La présente Norme internationale n'est pas applicable aux essences contenant des additifs manganiques antidétonants.

Naftni proizvodi - Določevanje svinca v bencinu - Jodna monokloridna metoda (ISO 3830:1993)

General Information

• Status: Published
• Publication Date: 22-Aug-1995
• ICS: 75.160.20 - Liquid fuels
• Technical Committee: CEN/TC 19 - Petroleum products, lubricants and related products
• Drafting Committee: CEN/TC 19 - Petroleum products, lubricants and related products
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Start Date: 08-Oct-2010
• Completion Date: 08-Oct-2010
• Ref Project: SIST EN ISO 3830:1998 - Petroleum products - Determination of lead content of gasoline - Iodine monochloride method (ISO 3830:1993)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 3830:1998
01-maj-1998
1DGRPHãþD
SIST EN 23830:1989:2007
1DIWQLSURL]YRGL'RORþHYDQMHVYLQFDYEHQFLQX-RGQDPRQRNORULGQDPHWRGD
,62
Petroleum products - Determination of lead content of gasoline - Iodine monochloride
method (ISO 3830:1993)
Mineralölerzeugnisse - Bestimmung des Bleigehaltes von Ottokraftstoffen -
Iodmonochlorid-Verfahren (ISO 3830:1993)
Produits pétroliers - Détermination de la teneur en plomb de l'essence - Méthode au
monochlorure d'iode (ISO 3830:1993)
Ta slovenski standard je istoveten z: EN ISO 3830:1995
ICS:
75.160.20 7HNRþDJRULYD Liquid fuels
SIST EN ISO 3830:1998 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 3830:1998

---------------------- Page: 2 ----------------------

SIST EN ISO 3830:1998

---------------------- Page: 3 ----------------------

SIST EN ISO 3830:1998

---------------------- Page: 4 ----------------------

SIST EN ISO 3830:1998
INTERNATIONAL
ISO
STANDARD
3830
Third edition
1993-10-01
Petroleum products - Determination of
lead content of gasoline - lodine
monochloride method
Produits p&roliers - Determination de Ia teneur en plomb de
l’essence - Methode au monochlorure d’iode
Reference number
ISO 3830:1993(E)

---------------------- Page: 5 ----------------------

SIST EN ISO 3830:1998
ISO 3830:1993(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, governmental
and non-governmental, in liaison with ISO, also take part in the work. ISO
collaborates closely with the International Electrotechnical Commission
(1 EC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of the member bodies casting
a vote.
International Standard ISO 3830 was prepared by Technical Committee
ISO/TC 28, Petroleum products and lubricants.
This third edition cancels and replaces the second edition
(ISO 3830:1981), which has been technically revised.
0 ISO 1993
All rights reserved. No part of this publication may be reproduced or utilized in any form or
by any means, electronie or mechanical, including photocopying and microfilm, without per-
mission in writing from the publisher,
International Organization for Standardization
Case Postale 56 l CH-l 211 Geneve 20 l Switzerland
Printed in Switzerland

---------------------- Page: 6 ----------------------

SIST EN ISO 3830:1998
INTERNATIONAL STANDARD ISO 3830:1993(E)
Petroleum products - Determination of lead content
of gasoline - lodine monochloride method
WARNING - The use of this International Standard may involve hazardous materials, operations
and equipment. This Standard does not purport to address all of the safety Problems associated
with its use. It is the responsibility of the User of this Standard to establish appropriate safety and
health practices and determine the applicability of regulatory limitations Prior to use,
ISO 3170:1988, Petroleum liquids - Manual
1 Scope
sampling.
This International Standard specifies a method for the
- Automatic pipe-
ISO 3171:1988, Petroleum liquids
determination of total lead content in gasolines con-
line sampling.
taining lead alkyls at concentrations between 0,026 g
and 1,300 g of lead per litre.
ISO 3696:1987, Water for analytical laboratory use -
Specifica tion and test methods.
This International Standard is not applicable to gaso-
line containing manganese anti-knock additives.
ISO 3839: 1978, Petroleum distillates and commercial
alipha tic olefins - Determination of bromine number
- Electrometric method.
2 Normative references
ISO 4788: 1980, Laboratory glassware - Graduated
measuring cylinders.
The following Standards contain provisions which,
through reference in this text, constitute provisions
of this International Standard. At the time of publi- ISO 4800: 1977, Laborstory glassware - Separating
cation, the editions indicated were valid. All Standards funnels and dropping funnels.
are subject to revision, and Parties to agreements
based on this International Standard are encouraged
to investigate the possibility of applying the most re-
cent editions of the Standards indicated below.
3 Principle
Members of IEC and ISO maintain registers of cur-
rently valid International Standards.
A known volume of the test Sample is diluted with
heavy distillate and shaken
...