EN ISO 17683:2015
(Main)Ships and marine technology - Ceramic weld backing for marine use (ISO 17683:2014)
Ships and marine technology - Ceramic weld backing for marine use (ISO 17683:2014)
ISO 17683:2014 specifies the classification, dimension and appearance, performance, and test methods for ceramic weld backing. It also specifies marking, packaging, and storage.
ISO 17683:2014 is applicable to designing, manufacturing, testing, and accepting ceramic weld backing that are to be used in the double side form with single side weld, such as arc welding, gas welding, vertical gas welding, and submerged arc welding, and the shaping structural steel welding end for carbon steel, stainless steel, aluminium alloy, copper alloy etc.
Schiffe und Meerestechnik - Keramische Schweißbadsicherungen für maritime Anwendungen (ISO 17683:2014)
Navires et technologie maritime - Soutien de soudures en céramique pour usage maritime (ISO 17683:2014)
L'ISO 17683:2014 spécifie la classification, les dimensions, l'aspect et les performances des supports envers de soudage en céramique, ainsi que les méthodes d'essai correspondantes. Elle contient également des spécifications relatives au marquage, à l'emballage et au stockage.
L'ISO 17683:2014 est applicable à la conception, à la fabrication, aux essais et à la réception des supports envers de soudage en céramique, destinés à être utilisés des deux côtés lors d'opérations de soudage à l'arc, de soudage aux gaz, de soudage vertical aux gaz, ou de soudage à l'arc sous flux réalisées d'un seul côté sur aciers de construction, aciers au carbone, aciers inoxydables, alliages d'aluminium, alliages de cuivre, etc.
Ladje in pomorska tehnologija - Keramična podložka za zvar za uporabo v pomorstvu (ISO 17683:2014)
Ta mednarodni standard določa klasifikacijo, dimenzije in videz, delovanje in metode preskušanja za keramično podložko za zvar. Določa tudi označevanje, embalažo in shranjevanje. Ta mednarodni standard velja za oblikovanje, proizvodnjo, preskušanje in sprejemanje keramičnih podložk za zvar, ki se bodo uporabljale v dvostranski obliki z enostranskim zvarom, na primer obločno varjenje, plinsko varjenje, navpično plinsko varjenje in zakrito obločno varjenje ter varjenje pri oblikovanju konstrukcijskega jekla za ogljikovo jeklo, nerjavno jeklo, aluminijevo zlitino, bakreno zlitino in podobno.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2016
/DGMHLQSRPRUVNDWHKQRORJLMD.HUDPLþQDSRGORåND]D]YDU]DXSRUDERY
SRPRUVWYX ,62
Ships and marine technology - Ceramic weld backing for marine use (ISO 17683:2014)
Schiffe und Meerestechnik - Keramische Schweißbadsicherungen für maritime
Anwendungen (ISO 17683:2014)
Navires et technologie maritime - Soutien de soudures en céramique (ISO 17683:2014)
Ta slovenski standard je istoveten z: EN ISO 17683:2015
ICS:
47.020.10 Ladijski trupi in njihovi Hulls and their structure
konstrukcijski elementi elements
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 17683
EUROPEAN STANDARD
NORME EUROPÉENNE
December 2015
EUROPÄISCHE NORM
ICS 47.020.10
English Version
Ships and marine technology - Ceramic weld backing for
marine use (ISO 17683:2014)
Navires et technologie maritime - Soutien de soudures Schiffe und Meerestechnik - Keramische
en céramique pour usage maritime (ISO 17683:2014) Schweißbadsicherungen für maritime Anwendungen
(ISO 17683:2014)
This European Standard was approved by CEN on 11 June 2015.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17683:2015 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
The text of ISO 17683:2014 has been prepared by Technical Committee ISO/TC 8 “Ships and marine
technology” of the International Organization for Standardization (ISO) and has been taken over as EN
ISO 17683:2015 by Technical Committee CEN/TC 121 “Welding and allied processes” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by June 2016, and conflicting national standards shall be
withdrawn at the latest by June 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 17683:2014 has been approved by CEN as EN ISO 17683:2015 without any modification.
INTERNATIONAL ISO
STANDARD 17683
First edition
2014-02-01
Ships and marine technology —
Ceramic weld backing for marine use
Navires et technologie maritime — Soutien de soudures en céramique
Reference number
ISO 17683:2014(E)
©
ISO 2014
ISO 17683:2014(E)
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved
ISO 17683:2014(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Classification . 1
5 Dimensions and appearance . 2
5.1 General . 2
5.2 Dimensions . 2
5.3 Appearance . 2
6 Performance and test . 2
6.1 Moisture absorption rate . 2
6.2 Refractoriness . 3
6.3 Chemical composition . 3
6.4 Adhesive aluminium foil tape . 3
6.5 Metal cases. 3
7 Type approval test . 4
7.1 General . 4
7.2 Test items . 4
7.3 Acceptance criteria . 4
8 Acceptance test . 4
8.1 Test items . 4
8.2 Acceptance criteria . 4
9 Marking, packaging, and storage . 5
9.1 Marking . 5
9.2 Packaging . 5
9.3 Storage . 5
ISO 17683:2014(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical Barriers
to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 8, Ships and marine technology, Subcommittee
SC 8, Ship design.
iv © ISO 2014 – All rights reserved
INTERNATIONAL STANDARD ISO 17683:2014(E)
Ships and marine technology — Ceramic weld backing for
marine use
1 Scope
This International Standard specifies the classification, dimension and appearance, performance, and
test methods for ceramic weld backing. It also specifies marking, packaging, and storage.
This International Standard is applicable to designing, manufacturing, testing, and accepting ceramic
weld backing that are to be used in the double side form with single side weld, such as arc welding, gas
welding, vertical gas welding, and submerged arc welding, and the shaping structural steel welding end
for carbon steel, stainless steel, aluminium alloy, copper alloy, and so on.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
ISO 528, Refractory products — Determination of pyrometric cone equivalent (refractoriness)
ISO 29862, Self adhesive tapes — Determination of peel adhesion properties
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
ceramic weld backing block
ceramic block with certain geometric shape manufactured by inorganic material
3.2
moisture
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.