EN 790:2001
(Main)Inland navigation vessels - Stairs with inclination angles of 45° to 60° - Requirements, types
Inland navigation vessels - Stairs with inclination angles of 45° to 60° - Requirements, types
1 Scope
This European Standard applies to stairs with inclination angles of 45° to 60°, having at least two steps, in working areas of inland navigation vessels.
It does not apply to stairs in passenger areas.
NOTE Whenever possible, stairs specified in EN 13056 should be preferred.
Fahrzeuge der Binnenschiffahrt - Treppen mit Steigungswinkeln von 45° bis 60° - Anforderungen, Bauarten
1 Anwendungsbereich
Diese Europäische Norm gilt für Treppen mit Steigungswinkeln von 45° bis 60° und mindestens zwei Stufen in Arbeitsbereichen auf Fahrzeugen der Binnenschif-ffahrt.
Sie gilt nicht für Treppen in Fahrgastbereichen.
ANMERKUNG Wenn immer möglich, sollten Treppen nach EN 13056 bevorzugt werden.
Bateaux de navigation intérieure - Escaliers à angles d'inclinaison entre 45° et 60° - Exigences, types
Cette norme européenne s'applique aux escaliers à angles d'inclinaison entre 45° et 60° et à au moins deux marches installés dans les zones de travail des bateaux de navigation intérieure. Elle ne s'applique pas aux escaliers prévus dans les parties de bateaux accessibles aux passagers. Pour les escaliers dans la zone extérieure, des angles d'inclinaison jusqu'à 55°, pour les escaliers dans la machinerie et les chambres de chauffe, des angles d'inclinaison jusqu'à 60° sont admissibles. NOTE:Dans la mesure du possible, il faudrait donner la préférence aux escaliers selon l'EN 13056.
Inland navigation vessels - Stairs with inclination angles of 45o to 60o - Requirements, types
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2002
1DGRPHãþD
SIST EN 790:2000
Inland navigation vessels - Stairs with inclination angles of 45o to 60o -
Requirements, types
Inland navigation vessels - Stairs with inclination angles of 45° to 60° - Requirements,
types
Fahrzeuge der Binnenschiffahrt - Treppen mit Steigungswinkeln von 45° bis 60° -
Anforderungen, Bauarten
Bateaux de navigation intérieure - Escaliers a angles d'inclinaison entre 45° et 60° -
Exigences, types
Ta slovenski standard je istoveten z: EN 790:2001
ICS:
47.020.10 Ladijski trupi in njihovi Hulls and their structure
konstrukcijski elementi elements
47.060 -H]HUVNDLQUHþQDSORYLOD Inland navigation vessels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 790
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2001
ICS 47.020.10; 47.060 Supersedes EN 790:1994
English version
Inland navigation vessels - Stairs with inclination angles of 45°
to 60° - Requirements, types
Bateaux de navigation intérieure - Escaliers à angles Fahrzeuge der Binnenschiffahrt - Treppen mit
d'inclinaison entre 45° et 60° - Exigences, types Steigungswinkeln von 45° bis 60° - Anforderungen,
Bauarten
This European Standard was approved by CEN on 8 March 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 790:2001 E
worldwide for CEN national Members.
Page 2
Contents
Page
Foreword . 3
1 Scope. 4
2 Normative references. 4
3 Terms and definitions . 4
4 Safety requirements. 5
4.1 Design. 5
4.2 Dimensions. 6
4.3 Space between steps . 8
4.4 Deviation for stairs for a height difference below 1,0 m. 8
4.5 Landings/platforms adjacent to stairs. 8
4.6 Safety of treads . 8
4.7 Hand rails/railings . 8
4.8 Headroom . 8
4.9 Strength . 8
4.10 Fire resistance. 9
5 Manufacturer's declaration . 9
6 Designation. 9
Page 3
Foreword
This European Standard has been prepared by Technical Committee CEN/TC 15 "Inland navigation vessels" , the
secretariat of which is held by DIN.
This European Standard supersedes EN 790:1994.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by November 2001, and conflicting national standards shall be withdrawn by
November 2001.
The standard specifies requirements for stairs within the meaning of Council Directive 82/714/EEC of 4 October
1982 laying down technical requirements for inland waterway vessels.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,
Switzerland and the United Kingdom.
Page 4
1 Scope
This European Standard applies to stairs with inclination angles of 45° to 60°, having atleasttwo steps, in working
areas of inland navigation vessels.
It does not apply to stairs in passenger areas.
NOTE Whenever possible, stairs specified in EN 13056 should be preferred.
2 Normative references
This European Standard incorporates by dated or undated reference, provisions fronm other publications. These
normative references are cited at the appropriate places in the text and the publications are listed hereafter. For
dated references, subsequent amendments to or revisions of any of these publications apply to this European
Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the
publication referred to applies (including amendments).
EN 711, Inland navigation vesselst – Railings for decks – Requirements, types
EN 22768-1, General tolerances – Part 1: Tolerances for linear and angular dimensions without individual tolerance
indications (Identical to ISO 2768-1:1989)
EN 13056:2000, Inland navigation vessels – Stair
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.