Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 2: The close-proximity method (ISO 11819-2:2017)

ISO 11819-2:2017 specifies a method of evaluating different road surfaces with respect to their influence on traffic noise, under conditions when tyre/road noise dominates. The interpretation of the results applies to free-flowing traffic travelling on essentially level roads at constant speeds of 40 km/h and upwards, in which cases tyre/road noise is assumed to dominate (although in some countries it is possible that tyre/road noise does not dominate at 40 km/h when the proportion of heavy vehicles is high). For other driving conditions where traffic is not free-flowing, such as at junctions or under heavy acceleration, and where the traffic is congested, the influence of the road surface on noise emission is more complex. This is also the case for roads with high longitudinal gradients and a high proportion of heavy vehicles.
A standard method for comparing noise characteristics of road surfaces gives road and environment authorities a tool for establishing common practices or limits as to the use of surfacings meeting certain noise criteria. However, it is not within the scope of this document to suggest such criteria.
ISO 11819-1 defines another method: the statistical pass-by (SPB) method. The close-proximity (CPX) method specified in the present document has the same main objectives as the SPB method, but is intended to be used specifically in applications that are complementary to it, such as:
-      noise characterization of road surfaces at almost any arbitrary site, with the main purpose of checking compliance with a surface specification (an example for conformity of production is suggested in Reference [1]);
-      checking the acoustic effect of maintenance and condition, e.g. wear of and damage to surfaces, as well as clogging and the effect of cleaning of porous surfaces;
-      checking the longitudinal and lateral homogeneity of a road section;
-      the development of quieter road surfaces and research on tyre/road interaction.
NOTE          This document does not describe the conditions of application for formal purposes of the measurement with the CPX method. Such conditions may be defined in other standards or legal texts. However, suggestions for the applicability of ISO 11819-1 and this document are provided in Annex D.
Measurements with the CPX method are faster and more practical than with the SPB method, but are more limited in the sense that it is relevant only in cases where tyre/road noise dominates and power unit noise can be neglected. Furthermore, it cannot take heavy vehicle tyre/road noise into account as fully as the SPB method can, since it uses a light truck tyre as a proxy for heavy vehicle tyres and does not take power unit noise into account.
The CPX method specified in this document is intended to measure the properties of road surfaces, not the properties of tyres. If the method is used for research purposes, to provide an indication of differences between tyres, the loads and inflations would normally be adjusted to other values than specified in this document.

Akustik - Messung des Einflusses von Straßenoberflächen auf Verkehrsgeräusche - Teil 2: Nahfeldmessverfahren (ISO 11819-2:2017)

Dieses Dokument legt eine Methode zur Bewertung verschiedener Straßenoberflächen hinsichtlich ihres Einflusses auf Straßenverkehrsgeräusche unter Bedingungen fest, bei denen Reifen/Fahrbahn-Geräusche dominieren. Die Interpretation der Ergebnisse bezieht sich auf frei fließenden Verkehr auf im Wesentlichen ebenen Straßen mit konstanten Geschwindigkeiten von mindestens 40 km/h. Für diese Fälle wird angenommen, dass Reifen/Fahrbahn-Geräusche dominieren (allerdings besteht in einigen Ländern die Möglichkeit, dass bei 40 km/h und hohem Aufkommen schwerer Fahrzeuge Reifen/Fahrbahngeräusche nicht dominieren). Bei anderen Fahrbedingungen, wenn der Verkehr nicht frei fließt, wie an Kreuzungen, bei hoher Beschleunigung oder verstopften Straßen, ist die Zusammensetzung des Verkehrsgeräusches komplexer. Dies gilt auch für Straßen mit großer Längsneigung und hohem Aufkommen schwerer Fahrzeuge.
Ein genormtes Verfahren zum Vergleich der akustischen Eigenschaften von Straßenoberflächen gibt Straßen  und Umweltbehörden ein Hilfsmittel an die Hand, Straßenoberflächen im Hinblick auf die Einhaltung bestimmter Lärmgrenzwerte auszuwählen. Dieses Dokument hat jedoch nicht zum Ziel, solche Grenzwerte vorzuschlagen.
ISO 11819 1 legt ein anderes Verfahren fest: Das statistische Vorbeifahrtverfahren. Die in diesem Dokument beschriebene Nahfeldmessmethode (en: Close-Proximity Method, CPX) hat dieselben Ziele wie das SPB Verfahren; allerdings soll sie in Situationen zu Anwendungen kommen, in denen sie letztere ergänzt, zum Beispiel:
—   Lärmcharakterisierung von Straßenoberflächen an jedem beliebigen Ort, wobei der Hauptzweck in der Prüfung der Einhaltung einer Oberflächenspezifikation besteht (ein Beispiel für die Übereinstimmung der Herstellung wird in Literaturhinweis [1] vorgestellt);
—   Prüfung der akustischen Wirkung von Wartung und Zustand, z. B. Abnutzung und Beschädigung von Oberflächen oder Verstopfung und Reinigung poröser Oberflächen;
—   Prüfung der Homogenität eines Straßenabschnitts in Längs- und Seitenrichtung;
—   die Entwicklung geräuschärmerer Straßenoberflächen und Erforschung der Reifen/Fahrbahn-Interaktion.
ANMERKUNG   Dieses Dokument enthält keine Vorgaben hinsichtlich der Bedingungen zur formellen Anwendung von Messungen mit der CPX-Methode. Derartige Bedingungen können in anderen Normen oder Rechtstexten definiert werden. Allerdings enthält Anhang D Vorschläge zur Anwendung von ISO 11819 1 und diesem Dokument.
Messungen mit der CPX-Methode sind schneller und praktikabler als Messungen mit dem SPB-Verfahren; allerdings sind sie in der Hinsicht eingeschränkt, dass sie nur in Fällen relevant sind, in denen Reifen/Fahrbahn-Geräusche dominieren und Antriebsgeräusche vernachlässigt werden können. Des Weiteren können bei ihnen die Reifen/Fahrbahn-Geräusche schwerer Fahrzeuge nicht in dem Umfang wie beim SPB-Verfahren berücksichtigt werden, da bei ihnen Kleinlaster-Reifen stellvertretend für LKW Reifen zur Anwendung kommen und die Antriebsgeräusche nicht berücksichtigt werden.
Die in diesem Dokument dargestellte CPX-Methode dient der Messung der Eigenschaften von Straßenoberflächen und nicht der Eigenschaften von Reifen. Falls die Methode zu Forschungszwecken zur Erbringung von Hinweisen für Unterschiede von Reifen verwendet wird, würden die Belastungen und der Fülldruck üblicherweise auf andere Werte als jene in diesem Dokument eingestellt werden.

Acoustique - Méthode de mesurage de l'influence des revêtements de chaussées sur le bruit émis par la circulation - Partie 2: Méthode de proximité immédiate (ISO 11819-2:2017)

ISO 11819-2:2017 décrit une méthode d'évaluation de différents revêtements de chaussée en ce qui concerne leur influence sur le bruit émis par la circulation, dans des conditions où prédomine le bruit de contact pneumatique/chaussée. L'interprétation des résultats s'applique à des véhicules se déplaçant dans des conditions de circulation fluide sur des routes sensiblement planes à des vitesses constantes de 40 km/h et plus, auquel cas le bruit de contact pneumatique/chaussée est supposé prédominer (bien que dans certains pays, le bruit de contact pneumatique/chaussée peut ne pas prédominer à 40 km/h lorsque la proportion de véhicules lourds est élevée). Dans les autres conditions de conduite, où la circulation n'est pas fluide, par exemple au niveau des carrefours ou en cas de forte accélération, et aux endroits où l'on rencontre souvent des encombrements, l'influence du revêtement de la chaussée sur l'émission sonore est plus complexe. C'est également le cas pour les routes à fortes pentes longitudinales et supportant des trafics à forte proportion de véhicules lourds.
Une méthode normalisée de comparaison des caractéristiques acoustiques des revêtements de chaussée fournit aux autorités responsables du réseau routier et de l'environnement un outil leur permettant d'établir des pratiques courantes ou des limites pour l'utilisation de revêtements conformes à certains critères acoustiques. La définition de ces critères ne fait toutefois pas l'objet du présent document.
L'ISO 11819‑1 définit une autre méthode: la méthode statistique au passage (SPB). La méthode de proximité (CPX) décrite dans le présent document a les mêmes objectifs que la méthode SPB, mais elle est conçue spécifiquement pour des applications complémentaires telles que:
-      la caractérisation acoustique des revêtements de chaussée au niveau de pratiquement n'importe quel site arbitraire, principalement dans le but de vérifier la conformité à des spécifications de revêtement (un exemple de la conformité de la production est suggéré dans la Référence [1]);
-      la vérification de l'impact acoustique de l'entretien et de l'état des revêtements, par exemple l'usure et la dégradation de l'état de surface, ainsi que le colmatage et l'effet du nettoyage des revêtements poreux;
-      la vérification de l'homogénéité longitudinale et latérale sur une zone d'essai;
-      le développement de revêtements de chaussée moins bruyants et l'étude de l'interaction pneumatique/chaussée.
NOTE       Le présent document ne décrit pas les conditions d'application pour les besoins formels du mesurage selon la méthode CPX. Ces conditions peuvent être définies dans d'autres normes ou dans des textes de loi. Toutefois, certains conseils vis-à-vis de l'applicabilité de l'ISO 11819‑1 et du présent document sont donnés à l'Annexe D.
Les mesures réalisées avec la méthode CPX sont plus rapides et plus pratiques que celles réalisées avec la méthode SPB, mais elles sont plus limitées dans le sens où elles ne sont applicables que dans les cas où le bruit de contact pneumatique/chaussée prédomine et où le bruit du groupe motopropulseur peut être négligé. Par ailleurs, elle ne peut pas prendre en compte le bruit de contact pneumatique/chaussée des véhicules lourds de façon aussi complète que la méthode SPB car elle repose sur l'évaluation du bruit émis par un pneumatique de camion léger pour caractériser les pneumatiques de véhicules lourds et ne prend pas en compte le bruit du groupe motopropulseur.

Akustika - Merjenje vpliva cestnih površin na prometni hrup - 2. del: Metoda merjenja v neposredni bližini (ISO 11819-2:2017)

Ta standard določa metodo za merjenje učinka cestnih površin na hrup cestnega prometa v primerih, ko prevladuje hrup pnevmatik/prometa.

General Information

Status
Published
Publication Date
25-Apr-2017
Withdrawal Date
30-Oct-2017
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
26-Apr-2017
Completion Date
26-Apr-2017

Buy Standard

Standard
EN ISO 11819-2:2017 - BARVE
English language
74 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 11819-2:2015 - BARVE
English language
77 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11819-2:2017
01-julij-2017
Akustika - Merjenje vpliva cestnih površin na prometni hrup - 2. del: Metoda
merjenja v neposredni bližini (ISO 11819-2:2017)
Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 2: The
close-proximity method (ISO 11819-2:2017)
Akustik - Messung des Einflusses von Straßenoberflächen auf Verkehrsgeräusche - Teil
1: Nahfeldmessmethode (ISO 11819-2:2017)
Acoustique - Méthode de mesurage de l'influence des revêtements de chaussées sur le
bruit émis par la circulation - Partie 2: Méthode de proximité immédiate (ISO 11819-
2:2017)
Ta slovenski standard je istoveten z: EN ISO 11819-2:2017
ICS:
17.140.30 Emisija hrupa transportnih Noise emitted by means of
sredstev transport
SIST EN ISO 11819-2:2017 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11819-2:2017

---------------------- Page: 2 ----------------------

SIST EN ISO 11819-2:2017


EN ISO 11819-2
EUROPEAN STANDARD

NORME EUROPÉENNE

April 2017
EUROPÄISCHE NORM
ICS 17.140.30
English Version

Acoustics - Measurement of the influence of road surfaces
on traffic noise - Part 2: The close-proximity method (ISO
11819-2:2017)
Acoustique - Méthode de mesurage de l'influence des Akustik - Messung des Einflusses von
revêtements de chaussées sur le bruit émis par la Straßenoberflächen auf Verkehrsgeräusche - Teil 2:
circulation - Partie 2: Méthode de proximité immédiate Nahfeldmessverfahren (ISO 11819-2:2017)
(ISO 11819-2:2017)
This European Standard was approved by CEN on 19 January 2017.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11819-2:2017 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11819-2:2017
EN ISO 11819-2:2017 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------

SIST EN ISO 11819-2:2017
EN ISO 11819-2:2017 (E)
European foreword
This document (EN ISO 11819-2:2017) has been prepared by Technical Committee ISO/TC 43
“Acoustics” in collaboration with Technical Committee CEN/TC 227 “Road materials” the secretariat of
which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2017, and conflicting national standards shall
be withdrawn at the latest by October 2017.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 11819-2:2017 has been approved by CEN as EN ISO 11819-2:2017 without any
modification.
3

---------------------- Page: 5 ----------------------

SIST EN ISO 11819-2:2017

---------
...

SLOVENSKI STANDARD
oSIST prEN ISO 11819-2:2015
01-oktober-2015
Akustika - Merjenje vpliva cestnih površin na prometni hrup - 2. del: Metoda
merjenja v neposredni bližini (ISO/DIS 11819-2:2015)
Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 2: The
close-proximity method (ISO/DIS 11819-2:2015)
Akustik - Messung des Einflusses von Straßenoberflächen auf Verkehrsgeräusche - Teil
1: Nahfeldmessmethode
Acoustique - Méthode de mesurage de l'influence des revêtements de chaussées sur le
bruit émis par la circulation - Partie 2: Méthode de proximité immédiate (ISO/DIS 11819-
2:2015)
Ta slovenski standard je istoveten z: prEN ISO 11819-2
ICS:
17.140.30 Emisija hrupa transportnih Noise emitted by means of
sredstev transport
oSIST prEN ISO 11819-2:2015 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 11819-2:2015

---------------------- Page: 2 ----------------------
oSIST prEN ISO 11819-2:2015
DRAFT INTERNATIONAL STANDARD
ISO/DIS 11819-2.2
ISO/TC 43/SC 1 Secretariat: DIN
Voting begins on: Voting terminates on:
2015-10-01  2015-12-01
Acoustics — Measurement of the influence of road surfaces
on traffic noise —
Part 2:
The close-proximity method
Acoustique — Méthode de mesurage de l’influence des revêtements de chaussées sur le bruit émis par la
circulation —
Partie 2: Méthode de proximité immédiate
ICS: 17.140.30
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for
Standardization (ISO), and processed under the ISO lead mode of collaboration
as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member
bodies for a parallel five month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments
received, will be submitted to a parallel two-month approval vote in ISO and
THIS DOCUMENT IS A DRAFT CIRCULATED
formal vote in CEN.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
To expedite distribution, this document is circulated as received from the
IN ADDITION TO THEIR EVALUATION AS
committee secretariat. ISO Central Secretariat work of editing and text
BEING ACCEPTABLE FOR INDUSTRIAL,
composition will be undertaken at publication stage.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 11819-2.2:2015(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2015

---------------------- Page: 3 ----------------------
oSIST prEN ISO 11819-2:2015
ISO/DIS 11819-2.2:2015(E)

COPYRIGHT PROTECTED DOCUMENT
© ISO 2015, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2015 – All rights reserved

---------------------- Page: 4 ----------------------
oSIST prEN ISO 11819-2:2015
ISO/DIS 11819-2.2
Contents Page
Foreword . v
Introduction . vi
1 Scope . 1
2 Normative references . 2
3 Terms and definitions . 2
3.1 Road and pavement related definitions . 2
3.2 Measurement methods and equipment. 3
3.3 Acoustic quanti
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.