EN 1559-2:2014

Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings

This part of EN 1559 specifies the additional technical delivery conditions for steel castings unless other conditions have been agreed at the time of enquiry and order.
This European Standard is also applicable to nickel and cobalt alloy castings.

Gießereiwesen - Technische Lieferbedingungen - Teil 2: Zusätzliche Anforderungen an Stahlgussstücke

Dieser Teil von EN 1559 legt die zusätzlichen technischen Lieferbedingungen für Stahlgussstücke fest, soweit nicht zum Zeitpunkt der Anfrage und Bestellung andere Bedingungen vereinbart wurden.
Dieser Teil von EN 1559 gilt auch für Gussstücke aus Nickel- und Kobaltlegierungen.

Fonderie - Conditions techniques de fourniture - Partie 2: Spécifications complémentaires pour les pièces moulées en acier

La présente partie de l'EN 1559 spécifie les conditions techniques complémentaires de fourniture pour les pièces moulées en acier, à moins que d'autres conditions aient été convenues au moment de l'appel d'offres et de la commande.
La présente norme peut aussi être utilisée pour les pièces moulées en alliages de nickel et de cobalt.

Livarstvo - Tehnični dobavni pogoji - 2. del: Dodatne zahteve pri jeklenih ulitkih

Ta del standarda EN 1559 določa dodatne tehnične dobavne pogoje za jeklene ulitke, razen če je bil v času povpraševanja in naročila sklenjen dogovor o drugih pogojih.
Ta del standarda EN 1559 se uporablja tudi za ulitke iz nikljeve in kobaltove zlitine.

General Information

• Status: Published
• Publication Date: 30-Sep-2014
• Withdrawal Date: 29-Apr-2015
• ICS: 77.140.80 - Iron and steel castings
• Technical Committee: ECISS/TC 111 - Steel castings and forgings
• Drafting Committee: ECISS/TC 111 - Steel castings and forgings
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 17-Jun-2020
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Ref Project: SIST EN 1559-2:2014 - Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings

Relations

• Replaces: EN 1559-2:2000 - Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings
• Effective Date: 08-Jun-2022

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gießereiwesen - Technische Lieferbedingungen - Teil 2: Zusätzliche Anforderungen an StahlgussstückeFonderie - Condition techniques de fourniture - Partie 2: Spécifications complémentaires pour les pièces moulées en acierFounding - Technical conditions of delivery - Part 2: Additional requirements for steel castings77.140.80Železni in jekleni ulitkiIron and steel castingsICS:Ta slovenski standard je istoveten z:EN 1559-2:2014SIST EN 1559-2:2014en,fr,de01-december-2014SIST EN 1559-2:2014SLOVENSKI
STANDARDSIST EN 1559-2:20001DGRPHãþD



SIST EN 1559-2:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 1559-2
October 2014 ICS 77.140.80 Supersedes EN 1559-2:2000English Version
Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings
Fonderie - Conditions techniques de fourniture - Partie 2: Spécifications complémentaires pour les pièces moulées en acier
Gießereiwesen - Technische Lieferbedingungen - Teil 2: Zusätzliche Anforderungen an Stahlgussstücke This European Standard was approved by CEN on 18 July 2014.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2014 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 1559-2:2014 ESIST EN 1559-2:2014



EN 1559-2:2014 (E) 2 Contents Page Foreword .3 Introduction .4 1 Scope .5 2 Normative references .5 3 Terms and definitions .6 4 Information to be supplied by the purchaser .8 4.1 • jandatory information .8 4.2 •• lptional information .8 4.3 v arawingsf patterns and tools .8 4.4 v fnformation on the mass .8 4.5 v mreliminary sample .8 4.6 v fnitial sample .8 5 Designations .8 6 janufacture .8 6.1 janufacturing process .8 6.2 Welding operations.
...