EN 13245-2:2008

Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes

This European Standard specifies the health and safety requirements for unplasticized poly(vinyl chloride) (PVC-U) profiles and cellular unplasticized poly(vinyl chloride) (PVC-UE) profiles for interior and exterior wall and ceiling finishes. It also specifies methods for the evaluation of conformity of the products to the requirements, and includes requirements for their marking.
The products are intended for use as wall and ceiling finishes for internal and external applications according to the manufacturer's specifications, which may include specifications for the fixings.
Profiles for the management of electrical power cables, communication cables and power track systems used for the distribution of electrical power, roofline products (fascia and soffit) including guttering, internal trim profiles including window boards and profiles for windows or doors are not covered by this European Standard.

Kunststoffe - Profile aus weichmacherfreiem Polyvinylchlorid (PVC-U) für die Anwendung im Bauwesen - Teil 2: Profile aus PVC-U und Profile aus PVC-UE für Wand- und Deckenbekleidungen für Innen- und Außenanwendungen

In dieser Europäischen Norm werden die Gesundheits- und Sicherheitsanforderungen an Profile aus weichmacherfreiem
Polyvinylchlorid (PVC-U) und an Profile aus geschäumtem weichmacherfreiem Polyvinylchlorid
(PVC-UE) für Wand- und Deckenbekleidungen für Innen- und Außenanwendung festgelegt. Die Norm legt
darüber hinaus Verfahren für die Bewertung der Konformität der Produkte mit den Anforderungen fest, einschließlich
der Anforderungen an deren Kennzeichnung.
Die Produkte sind vorgesehen für die Verwendung als Wand- und Deckenbekleidungen für die Innen- und
Außenanwendung nach den Spezifikationen des Herstellers, die Spezifikationen für die Befestigungen enthalten
dürfen.
Profile für die Führung elektrischer Stromkabel, Datenkabel und Stromschienen für die Verteilung von
elektrischem Strom, Dachverkleidungsprodukte (Dachgesimse und Soffitten) einschließlich Dachrinnen,
Innenverkleidungsprofile einschließlich Fensterbretter und Fenster- oder Türprofile werden durch diese
Europäische Norm nicht abgedeckt.1)

Plastiques - Profilés en poly(chlorure de vinyle) non plastifié (PVC-U) pour applications dans le bâtiment - Partie 2: Profilés en PVC-U et profilés en PVC-UE pour finitions des murs et plafonds intérieurs et extérieurs

La présente Norme européenne spécifie les exigences de santé et de sécurité relatives aux profilés en
poly(chlorure de vinyle) non plastifié (PVC-U) et aux profilés en poly(chlorure de vinyle) non plastifié expansé
(PVC-UE) pour finitions des murs et plafonds intérieurs et extérieurs. Elle spécifie également des méthodes
d’évaluation de la conformité des produits aux exigences, et inclut des exigences pour leur marquage.
Les produits sont destinés à être utilisés comme finitions de murs et plafonds pour applications intérieures et
extérieures selon les spécifications du fabricant, qui peuvent inclure des spécifications pour les fixations.
La présente Norme européenne ne traite pas des profilés pour la gestion des câbles d'énergie électrique, des
câbles de communication et des chemins d’alimentation utilisés pour la distribution de l'énergie électrique, des
produits pour sous-toiture (bandeaux de rive et planches de sous-face) y compris les gouttières, des profilés
de finition intérieure de fenêtres y compris les tabliers intérieurs de fenêtres et des profilés pour les fenêtres et
les portes. 1)

Polimerni materiali - Profili iz nemehčanega polivinilklorida (PVC-U) za uporabo v gradbeništvu - 2. del: Profili PVC-U in PVC-UE za notranje in zunanje obloge zidov in stropov

General Information

• Status: Published
• Publication Date: 16-Sep-2008
• ICS: 83.140.99 - Other rubber and plastics products
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249/WG 5 - Thermoplastic profiles for building applications
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 19-Jun-2022
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/121 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on internal and external wall and ceiling finishes
• Ref Project: SIST EN 13245-2:2008 - Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes

Relations

• Corrected By: EN 13245-2:2008/AC:2009 - Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes
• Effective Date: 24-Oct-2009
• Parent: EN 13245-1:2004 - Plastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 1: Designation of light coloured profiles
• Effective Date: 22-Dec-2008

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kunststoffe - Profile aus weichmacherfreiem Polyvinylchlorid (PVC-U) für die Anwendung im Bauwesen - Teil 2: Profile aus PVC-U und Profile aus PVC-UE für Wand- und Deckenbekleidungen für Innen- und AußenanwendungenPlastiques - Profilés en poly(chlorure de vinyle) non plastifié (PVC-U) pour applications dans le bâtiment - Partie 2: Profilés en PVC-U et profilés en PVC-UE pour finitions des murs et plafonds intérieurs et extérieursPlastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications - Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes83.140.99Drugi izdelki iz gume in polimernih materialovOther rubber and plastics productsICS:Ta slovenski standard je istoveten z:EN 13245-2:2008SIST EN 13245-2:2008en,fr,de01-december-2008SIST EN 13245-2:2008SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13245-2September 2008ICS 83.140.99 English VersionPlastics - Unplasticized poly(vinyl chloride) (PVC-U) profiles forbuilding applications - Part 2: PVC-U profiles and PVC-UEprofiles for internal and external wall and ceiling finishesPlastiques - Profilés en poly(chlorure de vinyle) non plastifié(PVC-U) pour applications dans le bâtiment - Partie 2:Profilés en PVC-U et profilés en PVC-UE pour finitions desmurs et plafonds intérieurs et extérieursKunststoffe - Profile aus weichmacherfreiemPolyvinylchlorid (PVC-U) für die Anwendung im Bauwesen -Teil 2: Profile aus PVC-U und Profile aus PVC-UE fürWand- und Deckenbekleidungen für Innen- undAußenanwendungenThis European Standard was approved by CEN on 25 July 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13245-2:2008: ESIST EN 13245-2:2008

Mounting and fixing conditions of PVC-U profiles and PVC-UE profiles in the SBI test apparatus and direct application rules (see 4.1).14 A.1 Mounting and fixing conditions.14 A.2 Direct application rules and related parameters.17 A.2.1 Terms and definitions.17 A.2.2 Parameters.18 A.2.3 Direct application rules.19 Annex B (normative)
Impact resistance of PVC-UE profiles (see 4.3.3, 4.4.1.2 and 4.4.2.2 a)).21 B.1 Principle.21 B.2 Apparatus.21 B.3 Test specimens.23 B.4 Conditioning.23 B.5 Procedure.23 B.6 Expression of results.24 Annex C (normative)
Artificial ageing (fluorescent UV lamps) or natural ageing and codification of results (see 4.4.2.2 a)).25 C.1 General.25 C.2 Test method for artificial ageing.25 C.3 Test method for natural ageing.25 C.4 Codification of results to impact resistance testing after ageing.25 Annex D (normative)
Charpy impact strength and codification of results (see 4.4.2.2 b)).27 D.1 General.27 D.2 Impact strength test method.27 SIST EN 13245-2:2008

Clauses of this European Standard addressing the provisions of the EU Construction Products Directive.28 ZA.1 Scope and relevant characteristics.28 ZA.2 Procedure for attestation of conformity of PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes.31 ZA.3 CE marking and labelling.34 Bibliography.41
Designation standards for PVC-U profiles
prEN 13245-3, Designation of coated/coloured PVC-UE profiles (in preparation) EN 13245-2, Plastics — Unplasticized poly(vinyl chloride) (PVC-U) profiles for building applications — Part 2: PVC-U profiles and PVC-UE profiles for internal and external wall and ceiling finishes (standard prepared by CEN/TC 249) EN 13659, Shutters — Performance requirements including safety (standard prepared by CEN/TC 33)
Product standards a EN 14351-1, Windows and doors — Product standard, performance characteristics - Part 1: Windows and external pedestrian doorsets without resistance to fire and/or smoke leakage characteristics (standard prepared by CEN/TC 33) Semi-products standard
EN 12608, Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors — Classification, requirements and test methods (standard prepared by CEN/TC 33) a
Standards to provide possibility for the CE marking.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. SIST EN 13245-2:2008

1 Scope This European Standard specifies the health and safety requirements for unplasticized poly(vinyl chloride) (PVC-U) profiles and cellular unplasticized poly(vinyl chloride) (PVC-UE) profiles for interior and exterior wall and ceiling finishes. It also specifies methods for the evaluation of conformity of the products to the requirements, and includes requirements for their marking.
The products are intended for use as wall and ceiling finishes for internal and external applications according to the manufacturer's specifications, which may include specifications for the fixings. Profiles for the management of electrical power cables, communication cables and power track systems used for the distribution of electrical power, roofline products (fascia and soffit) including guttering, internal trim
...