EN ISO 14890:2013
(Main)Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for general use (ISO 14890:2013)
Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile construction for general use (ISO 14890:2013)
ISO 14890:2013 specifies requirements for rubber and/or plastics covered conveyor belting of textile construction for general surface use on flat or troughed idlers.
ISO 14890:2013 is not suitable or valid for light conveyor belts as described in ISO 21183-1.
Items that are not requirements of ISO 14890:2013, but need to be agreed between the manufacturer and the purchaser, as well as a list of the details intended to be supplied by the purchaser of belting with an enquiry are included in the annexes.
Fördergurte - Anforderungen an Textilfördergurte mit Gummi- oder Kunststoff-Deckplatten für allgemeine Anwendungen (ISO 14890:2013)
Diese Internationale Norm legt Anforderungen an Textilfördergurte mit Gummi und/oder Kunststoff Deck-platten für allgemeine Anwendungen über Tage auf flachen oder gemuldeten Tragrollen fest.
Diese Internationale Norm ist nicht anwendbar oder gültig für leichte Fördergurte nach ISO 21183 1.
Einzelheiten, die keine Anforderungen dieser Internationalen Norm, sondern zwischen Hersteller und Abnehmer zu vereinbaren sind, sind im Anhang A aufgenommen.
Eine Liste von Einzelheiten, die gedacht ist dem Abnehmer des Gurtes bei einer Anfrage mitzuliefern, ist im Anhang B gegeben.
Courroies transporteuses - Spécification pour courroies transporteuses recouvertes de caoutchouc ou de plastique à structure textile, d'usage général (ISO 14890:2013)
L'ISO 14890:2013 spécifie les exigences relatives aux courroies à revêtement caoutchouc et/ou plastique, à structure textile, pour une utilisation générale de type «jour» sur des rouleaux plats ou en auge.
L'ISO 14890:2013 n'est pas applicable aux courroies transporteuses légères telles que décrites dans l'ISO 21183‑1.
Certains points, qui ne sont pas des exigences de l'ISO 14890:2013, mais nécessitent un accord entre le fabricant et l'acheteur, sont inclus dans une annexe, de même qu'une liste de détails à fournir par l'acheteur de courroie lors de la commande.
Naprave za kontinuirni transport -Trakovi tračnih transporterjev - Zahteve za tračne transportne trakove iz tekstila z gumeno ali plastično oblogo za splošne namene (ISO 14890:2013)
Ta mednarodni standard podaja zahteve za tračne transportne trakove iz tekstila z gumeno in/ali plastično oblogo za splošne namene uporabe na ravnih ali koritastih kolescih. Ta mednarodni standard se ne uporablja oziroma ni veljaven za lahke trakove tračnih transporterjev iz standarda ISO 21183-1. Elementi, ki niso zahteve tega mednarodnega standarda, vendar se morata o njih strinjati proizvajalec in kupec, so vključeni v dodatek A. Seznam podrobnosti, ki jih mora kupec trakov priložiti poizvedbi, je podan v dodatku B.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2013
1DGRPHãþD
SIST EN ISO 14890:2004
1DSUDYH]DNRQWLQXLUQLWUDQVSRUW7UDNRYLWUDþQLKWUDQVSRUWHUMHY=DKWHYH]D
WUDþQHWUDQVSRUWQHWUDNRYHL]WHNVWLOD]JXPHQRDOLSODVWLþQRREORJR]DVSORãQH
QDPHQH ,62
Conveyor belts - Specification for rubber- or plastics-covered conveyor belts of textile
construction for general use (ISO 14890:2013)
Fördergurte - Anforderungen an Textilfördergurte mit Gummi- oder Kunststoff-
Deckplatten für allgemeine Anwendungen (ISO 14890:2013)
Courroies transporteuses - Spécification pour courroies transporteuses recouvertes de
caoutchouc ou de plastique à structure textile, d'usage général (ISO 14890:2013)
Ta slovenski standard je istoveten z: EN ISO 14890:2013
ICS:
53.040.20 Deli za transporterje Components for conveyors
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 14890
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2013
ICS 53.040.20 Supersedes EN ISO 14890:2003
English Version
Conveyor belts - Specification for rubber- or plastics-covered
conveyor belts of textile construction for general use (ISO
14890:2013)
Courroies transporteuses - Spécification pour courroies Fördergurte - Anforderungen an Textilfördergurte mit
transporteuses recouvertes de caoutchouc ou de plastique Gummi- oder Kunststoff-Deckplatten für allgemeine
à structure textile, d'usage général (ISO 14890:2013) Anwendungen (ISO 14890:2013)
This European Standard was approved by CEN on 21 January 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14890:2013: E
worldwide for CEN national Members.
Contents Page
Foreword . 3
Foreword
This document (EN ISO 14890:2013) has been prepared by Technical Committee ISO/TC 41 "Pulleys and
belts (including veebelts)" in collaboration with Technical Committee CEN/TC 188 “Conveyor belts” the
secretariat of which is held by SNV.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by August 2013, and conflicting national standards shall be withdrawn at
the latest by August 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14890:2003.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 14890:2013 has been approved by CEN as EN ISO 14890:2013 without any modification.
INTERNATIONAL ISO
STANDARD 14890
Second edition
2013-02-15
Conveyor belts — Specification for
rubber- or plastics-covered conveyor belts
of textile construction for general use
Courroies transporteuses — Spécification pour courroies
transporteuses recouvertes de caoutchouc ou de plastique à structure
textile, d’usage général
Reference number
ISO 14890:2013(E)
©
ISO 2013
ISO 14890:2013(E)
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2013 – All rights reserved
ISO 14890:2013(E)
Contents Page
Foreword .iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Designation . 2
4.1 Belting designation . 2
4.2 Examples for ordering . 3
5 Construction . 4
6 Length . 5
7 Width . 5
8 Rubber cover . 6
9 Tolerances on total belt thickness and cover thickness . 7
9.1 Tolerance on total belt thickness . 7
9.2 Tolerance on cover thickness . 7
10 Transverse fabric joints in multi-ply belting . 7
10.1 General . 7
10.2 Outer plies . 7
10.3 Inner plies . 8
10.4 Adjacent plies and non-adjacent plies . 8
10.5 Joints in the same ply . 8
10.6 Mono-ply, duo-ply and solid woven belting . 8
11 Longitudinal fabric joints in multi-ply belting and duo-ply belting. 8
11.1 Spacing of joints . 8
11.2 Number of joints . 8
12 Longitudinal fabric or carcass joints in solid woven and mono-ply belting . 8
13 Elongation . 8
14 Full thickness tensile strength . 8
15 Adhesion . 9
16 Troughability . 9
17 Sampling .10
18 Identification .10
Annex A (informative) Items to be agreed between the manufacturer and purchaser . 11
Annex B (informative) Helpful information to be supplied by the purchaser .12
Annex C (informative) Lateral drift — Straight running .14
Bibliography .15
ISO 14890:2013(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 14890 was prepared by Technical Committee ISO/TC 41, Pulleys and belts (including veebelts),
Subcommittee SC 3, Conveyor belts.
This second edition cancels and replaces the first edition (ISO 14890:2003), of which it constitutes a minor
revision. It also incorporates Technical Corrigendum ISO 14890:2003/Corr.1:2006.
iv © ISO 2013 – All rights reserved
ISO 14890:2013(E)
Introduction
In the preparation of this International Standard, consideration has been given to the work of ISO Technical
Committee ISO/TC41/SC3, and the following International Standards for conveyor belts have been followed as
closely as possible:
— ISO 251;
— ISO 252;
— ISO 282;
— ISO 283;
— ISO 433;
— ISO 583;
— ISO 703.
INTERNATIONAL STANDARD ISO 14890:2013(E)
Conveyor belts — Specification for rubber- or plastics-covered
conveyor belts of textile construction for general use
1 Scope
This International Standard specifies requirements for rubber and/or plastics covered conveyor belting of textile
construction for general surface use on flat or troughed idlers.
This International Standard is not suitable or valid for light conveyor bel
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.