iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 13924:2006/AC:2006

(Corrigendum)

Bitumen and bituminous binders - Specifications for hard paving grade bitumens

Bitumen and bituminous binders - Specifications for hard paving grade bitumens

2009-10-01: OD Citation flagged following request by ADC
CMC - Modification to contents, Clause 2, 5.1.4 and Table ZA.3
TC - Modification to Table 1

Bitumen und bitumenhaltige Bindemittel - Anforderungen an harte Straßenbaubitumen

Bitumes et liants bitumineux - Spécifications des bitumes routiers de grade dur

Bitumen in bitumenska veziva - Specifikacije za trše cestogradbene bitumne

General Information

Status
Withdrawn
Publication Date
03-Oct-2006
Withdrawal Date
01-Dec-2015
ICS
93.080.20 - Road construction materials
Technical Committee
CEN/TC 336 - Bituminous binders
Drafting Committee
CEN/TC 336/WG 1 - Bituminous binders for paving
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
02-Dec-2015
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/124 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on road construction products
Ref Project
SIST EN 13924:2006/AC:2007 - Bitumen and bituminous binders - Specifications for hard paving grade bitumens

Relations

Replaced By
EN 13924-1:2015 - Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens
Effective Date
09-Dec-2015
Corrects
EN 13924:2006 - Bitumen and bituminous binders - Specifications for hard paving grade bitumens
Effective Date
08-Jun-2022

Buy Standard

EN 13924:2006/AC:2007EN 13924:2006/AC:2007
PreviousNext
Corrigendum
EN 13924:2006/AC:2007
English, French and German language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumen in bitumenska veziva - Specifikacije za trše cestogradbene bitumneBitumen und bitumenhaltige Bindemittel - Anforderungen an harte StraßenbaubitumenBitumes et liants bitumineux - Spécifications des bitumes routiers de grade durBitumen and bituminous binders - Specifications for hard paving grade bitumens93.080.20Materiali za gradnjo cestRoad construction materials91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 13924:2006/AC:2006SIST EN 13924:2006/AC:2007en,fr,de01-marec-2007SIST EN 13924:2006/AC:2007SLOVENSKI
STANDARD



SIST EN 13924:2006/AC:2007



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13924:2006/ACOctober 2006Octobre 2006Oktober 2006ICS 93.080.20English versionVersion FrançaiseDeutsche FassungBitumen and bituminous binders - Specifications for hard paving gradebitumensBitumes et liants bitumineux -Spécifications des bitumes routiers degrade durBitumen und bitumenhaltige Bindemittel -Anforderungen an harteStraßenbaubitumenThis corrigendum becomes effective on 4 October 2006 for incorporation in the three officiallanguage versions of the EN.Ce corrigendum prendra effet le 4 octobre 2006 pour incorporation dans les trois versionslinguistiques officielles de la EN.Die Berichtigung tritt am 4.Oktober 2006 zur Einarbeitung in die drei offiziellen Sprachfassungen derEN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-10
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 13588:2017(Main)
Bitumen and bituminous binders - Determination of cohesion of bituminous binders with pendulum test
SIST EN 13588:2018

This European Standard specifies a method for measuring the cohesion of bituminous binders for surface dressing application at temperatures in the range of (- 10 oC) to (+ 80 °C) and for expressing the relationship between cohesion and temperature.
This method is applicable for pure bitumen, modified bitumen and fluxed bitumen; in the case of fluxed bitumen, the test can be performed on the binder containing fluxant or on binder from which the solvent has been removed. For bitumen emulsions, the test is carried out on the residual binder obtained after recovery and the method used to recover the binder should be reported.
WARNING - The use of this European Standard may involve hazardous materials, operations and equipment. This European Standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this European Standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15626:2016(Main)
Bitumen and bituminous binders - Determination of adhesivity of cut-back and fluxed bituminous binders by water immersion test - Aggregate method
SIST EN 15626:2016

This European Standard specifies a method for the determination of the adhesivity of cut-back and fluxed bituminous binders coated onto aggregate when immersed in water.
WARNING - The use of this document may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use. For environmental reasons and to reduce emissions to air, water and soil, it is recommended to limit the use of products, solvents and energy to the minimum required for a valid test result.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13924-1:2015(Main)
Bitumen and bituminous binders - Specification framework for special paving grade bitumen - Part 1: Hard paving grade bitumens
SIST EN 13924-1:2016

This part of EN 13924 provides a framework for specifying the properties and relevant test methods for hard paving grade bitumens which are suitable for use in the construction and maintenance of roads, airfields and other paved areas.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13808:2013(Main)
Bitumen and bituminous binders - Framework for specifying cationic bituminous emulsions
SIST EN 13808:2013

This European Standard specifies the requirements for performance characteristics of cationic bituminous emulsion classes which are suitable for use in the construction and maintenance of roads, airfields and other paved areas.
This European Standard applies to emulsions of bitumen, or of fluxed bitumen, or of cut back bitumen and to emulsions of polymer modified bitumen, or of polymer modified fluxed bitumen, or of polymer modified cut-back bitumen, which also includes latex modified bituminous emulsions.
Within Europe several types of cationic bituminous emulsions are used. Depending on traditional practices, different binder contents may be used for the same purpose. When designing a specification for a particular application, care should be taken to make class selections which are compatible and realistic.
NOTE   For the purposes of this European Standard, the term “% (m/m)” is used to represent the mass fraction.

  • Standard
    36 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    40 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14023:2010(Main)
Bitumen and bituminous binders - Specification framework for polymer modified bitumens
SIST EN 14023:2010

This European Standard provides a framework for specifying the characteristics and relevant test methods for polymer modified bitumens which are suitable for use in the construction and maintenance of roads, airfields and other paved areas.
This framework covers the following characteristics:
-   "consistency at intermediate service temperature";
-   "consistency at elevated service temperature";
-   "cohesion";
-   "durability" of consistency;
-   "brittleness at low service temperature";
-   "strain recovery".
The cohesion property has been included as a means of discriminating between polymer modified bitumens and other bituminous binders. The other essential requirements, "adhesion" and "setting ability" are indicated by tests carried out on the finished asphalt mixtures.
The introduction of classes of convenience in Table 1, Table 2 and Table 3 enables the selection of the most suitable specification for the bitumen taking account of local conditions of climate and use. The nomenclature of polymer modified bitumens comprises the penetration range and the minimum softening point (see example in Annex A).

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    27 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12591:2009(Main)
Bitumen and bituminous binders - Specifications for paving grade bitumens
SIST EN 12591:2009

This European Standard provides a framework for specifying a range of properties and relevant test methods for bitumens, which are suitable for use in the construction and maintenance of roads, airfields and other paved areas, together with requirements for evaluation of conformity.
This European Standard does not directly address ‘cohesion, adhesion and setting ability’ (see Introduction).
NOTE   Although industrial bitumens are specified according to EN 13305, it should be underlined that paving grade bitumens, specified according to this European Standard, can also be used for industrial applications.

  • Standard
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard – translation
    26 pages
    Slovenian language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 14023(Main)
Bitumen and bituminous binders - Specification framework for polymer modified bitumens
oSIST prEN 14023:2020

This document provides a framework for specifying a range of characteristics as well as applicable test methods for polymer modified bitumens, which are suitable for use in the construction and maintenance of roads, airfields and other paved areas, together with information on assessment and verification of constancy of performance. Polymer modified bitumen is defined in EN 12597.
This document describes the performance for characteristics of polymer modified bitumens, as shown in Table 1 and Table 2. It gives information for Declaration of Performance, selection of the grades, characteristics and test methods.
This framework covers the following essential characteristics:
-   consistency at intermediate service temperature;
-   consistency at elevated service temperature;
-   viscoelastic behaviour;
-   cohesion;
-   resistance to flow and deformation;
-   temperature sensitivity;
-   strain recovery;
-   durability of strain recovery;
-   durability of consistency at low service temperature;
-   durability of viscoelastic behaviour.
The characteristics of "adhesion" and "setting ability" are addressed by tests used on either the finished asphalt mixtures or on aggregate bitumen combinations, i.e. EN 12697-1, EN 12697-11, EN 12697-12, EN 12697-26 [2 to 5], rather than tests on the bitumen itself.
"Adhesion" is addressed by tests carried out on the finished asphalt mixtures.
"Setting ability" is the return of the polymer modified binder to its normal semi solid state as it returns to ambient temperature; this is a natural result of the cooling of the hot polymer modified bitumen after application and thus not addressed here.
The nomenclature of polymer modified bitumen comprises the nominal penetration range and the minimum softening point, e.g. PMB 45/80 60.

  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprEN 12591(Main)
Bitumen and bituminous binders - Specifications for paving grade bitumens
kSIST prEN 12591:2017

This European Standard provides a framework for specifying a range of properties and relevant test methods for bitumens, which are suitable for use in the construction and maintenance of roads, airfields and other paved areas, together with requirements for assessment and verification of constancy of performance.
This European Standard does not directly address ‘cohesion, adhesion and setting ability’ (see Introduction).
NOTE   Although industrial bitumens are specified according to EN 13305, it is underlined that paving grade bitumens, specified according to this European Standard, can also be used for industrial applications.

  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 12591(Main)
Bitumen and bituminous binders - Specifications for paving grade bitumens
oSIST prEN 12591:2005

This document provides a framework for specifying a range of properties and relevant test methods for bitumens and bituminous binders, together with requirements for evaluation of conformity.
This document does not directly address ‘cohesion, adhesion and setting ability’ (see Introduction).
NOTE   Although industrial bitumen are specified according to EN 13305, it should be underlined that paving grade bitumens, specified according to this standard, can also be use for industrial applications.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13282-3:2024(Main)
Hydraulic road binders - Part 3: Assessment and verification of constancy of performance
kSIST FprEN 13282-3:2023

This document specifies the scheme for the assessment and verification of constancy of performance (AVCP) of hydraulic road binders, including certification of conformity of the factory production control.
This document provides technical rules for factory production control, testing of samples taken at the manufacturing plant (autocontrol testing), assessment of the performance of the hydraulic road binder, initial inspection of the manufacturing plant and of factory production control and continuing surveillance, assessment and evaluation of factory production control.
The guidelines given in the Technical Report CEN/TR 14245 [5] contain information for the application of this document.
NOTE   In the context of this document the term, “construction product” refers to hydraulic road binder.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day