CEN/TS 17755:2022
(Main)Inorganic fertilizers - Determination of specific parameters
Inorganic fertilizers - Determination of specific parameters
This document specifies a reference to the method for the determination of the granulometry.
This document is applicable to solid inorganic macronutrient fertilizers classified as PFC 1(C)(I)(a) and PFC 7 as long as the blend only consists of EU fertilizing products classified as PFC 1(C)(I)(a) and PFC 5 as specified in the Regulation (EU) 2019/1009 [1].
Anorganische Düngemittel - Bestimmung spezifischer Parameter
Dieses Dokument legt eine Verweisung auf das Verfahren zur Bestimmung der Korngrößen fest.
Dieses Dokument ist anwendbar auf feste anorganische Makronährstoff-Düngemittel der Kategorien PFC 1(C)(I)(a) und PFC 7, vorausgesetzt, die Mischung besteht ausschließlich aus EU Dünge¬produkten der Kategorie PFC 1(C)(I)(a) und PFC 5 der Verordnung (EU) 2019/1009 [1].
Engrais inorganiques - Détermination des paramètres spécifiques
Le présent document spécifie une référence à la méthode de détermination de la granulométrie.
Le présent document est applicable aux engrais inorganiques solides à macroéléments classés en PFC 1(C)(I)(a) et PFC 7 tant que la combinaison ne se compose que de fertilisants UE classés en PFC 1(C)(I)(a) et PFC 5, comme spécifié dans le règlement (UE) 2019/1009 [1].
Anorganska gnojila - Določanje specifičnih parametrov
Ta dokument navaja metode za določanje granulometrije v anorganskih gnojilih.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-februar-2023
Anorganska gnojila - Določanje specifičnih parametrov
Inorganic fertilizers - Determination of specific parameters
Anorganische Düngemittel - Bestimmung spezifischer Parameter
Engrais inorganiques - Détermination des paramètres spécifiques
Ta slovenski standard je istoveten z: CEN/TS 17755:2022
ICS:
65.080 Gnojila Fertilizers
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
CEN/TS 17755
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
April 2022
TECHNISCHE SPEZIFIKATION
ICS 65.080
English Version
Inorganic fertilizers - Determination of specific parameters
Engrais inorganiques - Détermination des paramètres Anorganische Düngemittel - Bestimmung spezifischer
spécifiques Parameter
This Technical Specification (CEN/TS) was approved by CEN on 13 March 2022 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 17755:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Sampling and sample preparation . 5
4.1 Sampling . 5
4.2 Sample preparation . 5
5 Determination . 6
Bibliography . 7
European foreword
This document (CEN/TS 17755:2022) has been prepared by Technical Committee CEN/TC 260
“Fertilizers and liming materials”, the secretariat of which is held by DIN.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a standardization request given to CEN by the European
Commission and the European Free Trade
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.