EN 15368:2008/FprA1

Hydraulic binder for non-structural applications: definition, specifications and conformity criteria

This European Standard applies to Hydraulic binder for non-structural applications in construction used as binder for preparation of mortar or masonry, rendering and plastering and other non structural construction products.
This European Standard specifies the definition and composition of Hydraulic binder for non-structural applications (HB). It includes physical, mechanical and chemical requirements and defines strength classes. EN 15368 also states the conformity criteria and the related rules. Necessary durability requirements are also given.
NOTE   For normal applications the information given in this standard, and in the masonry specifications, EN 998-1 and EN 998-2, is generally sufficient. However, in special cases, an exchange of additional information between the producer and user can be helpful. The details of such an exchange are not within the scope of this standard but should be dealt with in accordance with national standards or other regulations or can be agreed between the parties concerned.
Terms of delivery or other contractual conditions, normally included in documents exchanged between the supplier and the purchaser of Hydraulic binder for non-structural applications, are outside the scope of this European Standard.

Hydraulisches Bindemittel für nichttragende Anwendungen - Definition, Anforderungen und Konformitätskriterien

Liant hydraulique pour applications non structurelles - Définition, spécifications et critères de conformité

Hidravlično vezivo za nekonstrukcijsko uporabo: definicija, specifikacije in merila skladnosti

General Information

• Status: Not Published
• ICS: 91.100.10 - Cement. Gypsum. Lime. Mortar
• ICS: 91.100.50 - Binders. Sealing materials
• Technical Committee: CEN/TC 51 - Cement and building limes
• Drafting Committee: CEN/TC 51/WG 6 - Definitions and terminology of cement
• Current Stage: 5060 - Closure of Vote - Formal Approval
• Start Date: 22-Mar-2010
• Due Date: 17-Oct-2010
• Completion Date: 22-Mar-2010
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/114 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on cements, buliding limes, and other hydr. binders
• Mandate: M/116 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on masonry and related products
• Ref Project: SIST EN 15368:2008/kprA1:2009 - Hydraulic binder for non-structural applications: definition, specifications and conformity criteria

Relations

• Merged Into: EN 15368:2008+A1:2010 - Hydraulic binder for non-structural applications - Definition, specifications and conformity criteria
• Effective Date: 27-Mar-2010
• Amends: EN 15368:2008 - Hydraulic binder for non-structural applications: definition, specifications and conformity criteria
• Effective Date: 08-Apr-2009

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 15368:2008/kprA1:2009
01-december-2009
+LGUDYOLþQRYH]LYR]DQHNRQVWUXNFLMVNRXSRUDERGHILQLFLMDVSHFLILNDFLMHLQPHULOD
VNODGQRVWL
Hydraulic binder for non-structural applications: definition, specifications and conformity
criteria
Hydraulisches Bindemittel für nichttragende Anwendungen - Definition, Anforderungen
und Konformitätskriterien
Liant hydraulique pour applications non structurelles - Définition, spécifications et critères
de conformité
Ta slovenski standard je istoveten z: EN 15368:2008/FprA1
ICS:
91.100.50 Veziva. Tesnilni materiali Binders. Sealing materials
SIST EN 15368:2008/kprA1:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 15368:2008/kprA1:2009

---------------------- Page: 2 ----------------------

SIST EN 15368:2008/kprA1:2009


EUROPEAN STANDARD
FINAL DRAFT
EN 15368:2008
NORME EUROPÉENNE

EUROPÄISCHE NORM
prA1
October 2009
ICS 91.100.50
English Version
Hydraulic binder for non-structural applications: definition,
specifications and conformity criteria
Liant hydraulique pour applications non structurelles - Hydraulisches Bindemittel für nichttragende Anwendungen
Définition, spécifications et critères de conformité - Definition, Anforderungen und Konformitätskriterien
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 51.

This draft amendment A1, if approved, will modify the European Standard EN 15368:2008. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.

This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.



Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 15368:2008/FprA1:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 15368:2008/kprA1:2009
EN 15368:2008/FprA1:2009 (E)
Contents Page
Foreword .3
1 Modification to the Foreword .4
2 Addition of Annex ZA .4


2

---------------------- Page: 4 ----------------------

SIST EN 15368:2008/kprA1:2009
EN 15368:2008/FprA1:2009 (E)
Foreword
This document (EN 15368:2008/FprA1:2009) has been prepared by Technical Committee CEN/TC 51
"Cement and building limes", the secretariat of which is held by NBN.
This document is currently submitted to the Unique Acceptance Procedure.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
3

---------------------- Page: 5 ----------------------

SIST EN 15368:2008/kprA1:2009
EN 15368:2008/FprA1:2009 (E)
1 Modification to the Foreword
Add the following paragraphs before the last paragraph:
"This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.".
2 Addition of Annex ZA
Add the following Annex ZA: "
Annex ZA
(informative)

Clauses of this European Standard addressing the provisions of the EU
Construction P
...