EN ISO 2039-1:2003

Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001)

This part of ISO 2039 specifies a method for determining the hardness of plastics and ebonite by means of a
loaded ball indenter.
The ball indentation hardness determined by this method may provide data for research and development, quality
control and acceptance or rejection under specifications.

Kunststoffe - Bestimmung der Härte - Teil 1: Kugeleindruckversuch (ISO 2039-1:2001)

Dieser Teil von ISO 2039 legt ein Verfahren zur Bestimmung der Härte von Kunststoffen und Hartgummi mit Hilfe eines belasteten kugelförmigen Eindringkörpers fest.
Die nach diesem Verfahren bestimmte Kugeleindruckhärte kann Werte liefern für Forschung und Entwicklung, Qualitätskontrolle und Annahme oder Ablehnung nach Spezifikationen.

Plastiques - Détermination de la dureté - Partie 1: Méthode de pénétration à la bille (ISO 2039-1:2001)

La présente partie de l'ISO 2039 spécifie une méthode pour la détermination de la dureté sous charge des
plastiques et de l'ébonite à l'aide d'un pénétrateur à bille.
La dureté à la bille par pénétration selon cette méthode peut fournir des données pour des travaux de recherches
et de développement, le contrôle de la qualité, ainsi que pour l'acceptation ou le rejet suivant des spécifications.

Polimerni materiali - Določanje trdote - 1. del: Metoda s kroglico (ISO 2039-1:2001)

General Information

• Status: Published
• Publication Date: 18-Feb-2003
• Withdrawal Date: 30-Aug-2003
• ICS: 83.080.01 - Plastics in general
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249 - Plastics
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 19-Feb-2003
• Completion Date: 19-Feb-2003
• Ref Project: SIST EN ISO 2039-1:2003 - Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001)

Relations

• Replaces: EN ISO 2039-1:1996 - Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:1993)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 2039-1:2003
01-julij-2003
1DGRPHãþD
SIST EN ISO 2039-1:2000
3ROLPHUQLPDWHULDOL'RORþDQMHWUGRWHGHO0HWRGDVNURJOLFR,62
Plastics - Determination of hardness - Part 1: Ball indentation method (ISO 2039-1:2001)
Kunststoffe - Bestimmung der Härte - Teil 1: Kugeleindruckversuch (ISO 2039-1:2001)
Plastiques - Détermination de la dureté - Partie 1: Méthode de pénétration a la bille (ISO
2039-1:2001)
Ta slovenski standard je istoveten z: EN ISO 2039-1:2003
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
SIST EN ISO 2039-1:2003 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 2039-1:2003

---------------------- Page: 2 ----------------------

SIST EN ISO 2039-1:2003
EUROPEAN STANDARD
EN ISO 2039-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
February 2003
ICS 83.080.01 Supersedes EN ISO 2039-1:1996
English version
Plastics - Determination of hardness - Part 1: Ball indentation
method (ISO 2039-1:2001)
Plastiques - Détermination de la dureté - Partie 1: Méthode Kunststoffe - Bestimmung der Härte - Teil 1:
de pénétration à la bille (ISO 2039-1:2001) Kugeleindruckversuch (ISO 2039-1:2001)
This European Standard was approved by CEN on 12 December 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 2039-1:2003 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 2039-1:2003
EN ISO 2039-1:2003 (E)
CORRECTED  2003-02-05
Foreword
The text of ISO 2039-1:2001 has been prepared by Technical Committee ISO/TC 61 "Plastics"
of the International Organization for Standardization (ISO) and has been taken over as EN ISO
2039-1:2003 by Technical Committee CEN/TC 249 "Plastics", the secretariat of which is held by
IBN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by August 2003, and conflicting national
standards shall be withdrawn at the latest by August 2003.
This document supersedes EN ISO 2039-1:1996.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium, Czech
Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and
the United Kingdom.
Endorsement notice
The text of ISO 2039-1:2001 has been approved by CEN as EN ISO 2039-1:2003 without any
modifications.
NOTE Normative references to International Standards are listed in Annex ZA (normative).
2

---------------------- Page: 4 ----------------------

SIST EN ISO 2039-1:2003
EN ISO 2039-1:2003 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated
by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 291 1997 Plastics - Standard atmospheres for EN ISO 291 1997
conditioning and testing
3

---------------------- Page: 5 ----------------------

SIST EN ISO 2039-1:2003

---------------------- Page: 6 ---------------
...