EN 29168:1994

Dental handpieces - Hose connectors (ISO 9168:1991)

Zahnärztliche Handstücke - Schlauchanschlüsse (ISO 9168:1991)

Diese Internationale Norm enthält vier gebräuchliche Arten von Anschlüssen für den Einsatz zwischen zahnärztlichen Handstücken und den biegsamen Schläuchen der Ausrüstung, die die Handstücke mit Wasser, Luft und Licht versorgen und für das Absaugen vorgesehen sind. Zweck dieser Internationalen Norm ist es, zuverlässige Austauschbarkeit zwischen Schläuchen und Handstücken zu erreichen.

Pièces à main dentaires - Connexions (ISO 9168:1991)

Subscribe to IEC 60061 Database to access the full and updated content of the series.

Dental handpieces - Hose connectors (ISO 9168:1991)

General Information

• Status: Withdrawn
• Publication Date: 14-May-1994
• Withdrawal Date: 14-Jul-2009
• ICS: 11.060.20 - Dental equipment
• Technical Committee: CEN/TC 55 - Dentistry
• Drafting Committee: CEN/TC 55 - Dentistry
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Jul-2009
• Completion Date: 15-Jul-2009
• Ref Project: SIST EN 29168:2000 - Dental handpieces - Hose connectors (ISO 9168:1991)

Relations

• Replaced By: EN ISO 9168:2009 - Dentistry - Hose connectors for air driven dental handpieces (ISO 9168:2009)
• Effective Date: 18-Jul-2009

Standards Content (Sample)

ISO
INTERNATIONAL
9168
STANDARD
Second edition
1991-09-01
Dental handpieces - Hose connectors
Pieces a main dentaires - Connexions
Reference number
ISO 9168:1991(E)

---------------------- Page: 1 ----------------------

ISO 9168:1991(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take patt in the
work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an Inter-
national Standard requires approval by at least 75 % of the member
bodies casting a vote.
International Standard ISO 9168 was prepared by Technical Committee
ISO/TC 106, Dentistry, Sub-Committee SC 4, Dental instruments.
This second edition cancels and replaces the first edition
(ISO 9168:1988), incorporating Draft Addendum 13989.
0 ISO 1991
All rights reserved. No part of this publication may be reproduced or utilized in any form
or by any means, electronie or mechanical, including photocopying and microfilm, without
permission In writing from the publisher.
International Organization for Standardization
Case Postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
ii

---------------------- Page: 2 ----------------------

INTERNATIONAL STANDARD ISO 9168:1991(E)
Dental handpieces - Hose connectors
ISO 261:1973, ISO general purpose metric screw
1 Scope
threads
- General plan.
This International Standard specifies four types of
Standard connectors for use between dental hand- 3 Classiflcation
pieces and the flexible hoses of the equipment
For the purposes of this International Standard, hose
which supply the handpieces with water, air and
connectors at-e designated as the following four
light, and provide for the exhaust. The purpose of
types:
this International Standard is to achieve reliable
interchangeability between hoses and handpieces.
- Type A: connector with two or three outlets;
- Type B: connector with four or five outlets;
- Type C: connector with four outlets and electrical
confacfs;
- Type D: connector with three outlets and con-
2 Normative reference
nection thread M12 x 0,5.
The following Standard contains provisions which,
through reference in this text, constitute provisions
4 Dimensional requirements
of this International Standard. At the time of publi-
cation, the edition indicated was valid. All Standards The dimensions, the outlet configuration and the use
are subject to revision, and Parties to agreements of the outlets shall be as specified in figure 1,
based on this International Standard are encour- figure 2, figure 3 and figure 4 respectively. The th
...