Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test methods

This document specifies requirements and test methods for marketed and delivered high FAME (B20 and B30) diesel fuel for use in diesel engine vehicles designed or subsequently adapted to run on high FAME (B20 and B30) fuel. High FAME (B20 and B30) diesel fuel is a mixture of up to 20 % (V/V) in total and up to 30 % (V/V) in total respectively fatty acid methyl esters (commonly known as FAME) complying with EN 14214 and automotive diesel fuel complying with EN 590.
For maintenance and control reasons high FAME (B20 and B30) diesel fuel is to be used in captive fleets that are intended to have an appropriate fuel management (see Clause 4).
NOTE 1   This product is allowed in Europe [4], but national legislation can set additional requirements or rules concerning, or even prohibiting, marketing or delivering of the product.
NOTE 2   For the purposes of this document, the terms "% (m/m)" and "% (V/V)" are used to represent respectively the mass fraction and the volume fraction.
NOTE 3   In this document, A-deviations apply (see Annex A).

Kraftstoffe - Dieselkraftstoffmischungen mit hohem FAME-Anteil (B20 und B30) - Anforderungen und Prüfverfahren

Dieses Dokument legt Anforderungen an und Prüfverfahren für gehandelte und gelieferte Dieselkraftstoffmischungen mit hohem FAME-Anteil (B20 und B30) für den Einsatz in dafür konstruierten oder nachträglich an Kraftstoff mit hohem FAME-Anteil (B20 und B30) angepassten Kraftfahrzeugen mit Dieselmotor fest. Dieselkraftstoffmischungen mit hohem FAME-Anteil (B20 und B30) sind Mischungen aus bis zu insgesamt 20 % (V/V) bzw. bis zu insgesamt 30 % (V/V) Fettsäuremethylester (allgemein bekannt als FAME) nach EN 14214 und Dieselkraftstoff nach EN 590.
Dieselkraftstoffmischungen mit hohem FAME-Anteil (B20 und B30) sind zur optimalen Wartung und Kontrolle in geschlossenen Fahrzeugflotten zu verwenden, für die ein entsprechendes Kraftstoffmanagement (siehe Abschnitt 4) vorgesehen sind.
ANMERKUNG 1   Dieses Produkt ist in Europa zugelassen [4]; einzelstaatliche Rechtsvorschriften können jedoch zusätzliche Anforderungen oder Regeln hinsichtlich des Inverkehrbringens oder der Auslieferung des Produktes festlegen oder es sogar verbieten.
ANMERKUNG 2   Für die Zwecke dieses Dokuments wird zur Angabe des Massenanteils einer Substanz der Ausdruck "% (m/m)" und für den Volumenanteil einer Substanz der Ausdruck "% (V/V)" verwendet.
ANMERKUNG 3   Für dieses Dokument gelten A-Abweichungen (siehe Anhang A).

Carburants pour automobiles - Carburant diesel à haute teneur en EMAG (B20 et B30) - Exigences et méthodes d'essai

Le présent document prescrit des exigences et des méthodes d'essai pour les carburants diesel à haute teneur en EMAG (B20 et B30) destinés aux véhicules à moteur diesel conçus ou adaptés en conséquence pour utiliser ce type de carburant. Le carburant diesel à haute teneur en EMAG (B20 et B30) est un mélange de carburant diesel pour automobiles conforme à l’EN 590 et d’esters méthyliques d’acides gras (appelés EMAG) conformes à l’EN 14214 à des hauteurs allant, respectivement, jusqu’à 20 % (V/V) au total et jusqu’à 30 % (V/V) au total.
Pour des raisons de maintenance et de contrôle, le carburant diesel à haute teneur en EMAG (B20 et B30) doit être utilisé dans des flottes captives pour lesquelles est prévue une gestion appropriée du carburant (voir Article 4).
NOTE 1   Ce produit est autorisé en Europe [4], mais la législation nationale peut fixer des exigences ou des règles supplémentaires concernant, ou même interdisant, la commercialisation ou la livraison du produit.
NOTE 2   Pour les besoins du présent document, les termes « % (m/m) » et « % (V/V) » sont utilisés pour désigner respectivement les fractions massiques et les fractions volumiques.
NOTE 3   Dans le présent document, des divergences A s’appliquent (voir Annexe A).

Goriva za motorna vozila - Dizelsko gorivo z visoko vsebnostjo FAME (B20 in B30) - Zahteve in preskusne metode

General Information

Status
Not Published
Publication Date
11-Aug-2024
Current Stage
4599 - Dispatch of FV draft to CMC - Finalization for Vote
Start Date
21-Feb-2024
Due Date
11-Aug-2022
Completion Date
21-Feb-2024

Relations

Buy Standard

Draft
prEN 16709:2022
English language
16 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 16709:2022
01-julij-2022
Goriva za motorna vozila - Dizelsko gorivo z visoko vsebnostjo FAME (B20 in B30)
- Zahteve in preskusne metode
Automotive fuels - High FAME diesel fuel (B20 and B30) - Requirements and test
methods
Kraftstoffe - Dieselkraftstoffmischungen mit hohem FAME-Anteil (B20 und B30) -
Anforderungen und Prüfverfahren
Carburants pour automobiles - Carburant diesel à haute teneur en EMAG (B20 et B30)
Exigences et méthodes d'essai
Ta slovenski standard je istoveten z: prEN 16709
ICS:
75.160.20 Tekoča goriva Liquid fuels
oSIST prEN 16709:2022 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 16709:2022

---------------------- Page: 2 ----------------------
oSIST prEN 16709:2022


DRAFT
EUROPEAN STANDARD
prEN 16709
NORME EUROPÉENNE

EUROPÄISCHE NORM

June 2022
ICS 75.160.20 Will supersede EN 16709:2015+A1:2018
English Version

Automotive fuels - High FAME diesel fuel (B20 and B30) -
Requirements and test methods
Carburants pour automobiles - Carburant diesel à Kraftstoffe - Dieselkraftstoffmischungen mit hohem
haute teneur en EMAG (B20 et B30) ¿ Exigences et FAME-Anteil (B20 und B30) - Anforderungen und
méthodes d'essai Prüfverfahren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 19.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 16709:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 16709:2022
prEN 16709:2022 (E)
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 7
4 Captive fleet application . 7
5 Sampling . 7
6 Pump marking . 7
7 Requirements and test methods . 8
7.1 Dyes and markers . 8
7.2 Additives .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.