EN 13722:2004

Furniture - Assessment of the surface gloss

This document specifies a method for the assessment of the surface gloss of furniture surfaces using three reflectometer geometries, 20°, 60° or 85° and relates to rigid surfaces of all finished products regardless of materials, except for finishes on leather and fabrics, which are excluded from this document.
The test is intended to be carried out on finished furniture, but can be carried out on test panels of the same material, finished in an identical manner to the finished product, and of a size sufficient to meet the requirements of the test.
It is not applicable for finishes on some metallic paints and pearly coatings.

Möbel - Bewertung des Oberflächenglanzes

Dieses Dokument legt ein Prüfverfahren für die Bewertung des Oberflächenglanzes von ebenen Möbeloberflächen unter Nutzung eines Reflektometers mit 20°, 60° oder 85° Messgeometrie fest und wird bei allen starren Oberflächen von endbehandelten Produkten, unabhängig vom Werkstoff angewendet, ausgenommen Oberflächen aus Leder und Textilien.
Die Prüfung wird im Allgemeinen am gebrauchsfertigen Möbel durchgeführt, kann aber auch an Prüfkörpern durchgeführt werden, die aus dem gleichen Werkstoff mit identischer Oberflächenbehandlung wie das Möbel bestehen und groß genug sind, um die Prüfungen entsprechend durchführen zu können.
Dieses Prüfverfahren ist an einigen Metallic  und Perlmutt Lackierungen nicht anwendbar.

Meubles - Évaluation de la brillance des surfaces

La présente norme européenne spécifie une méthode permettant d'évaluer la brillance des surfaces des meubles en utilisant trois géométries du réflectomètre c'est-à-dire 20°, 60° ou 85° et s'applique aux surfaces rigides de tous les produits finis, sans distinction de matériaux, à l'exception des finitions appliquées sur le cuir et les textiles, qui sont exclus de la présente norme européenne.
Cet essai est destiné à être réalisé sur des meubles finis, mais il peut être mené sur des panneaux d'essai dont le matériau et la finition sont identiques à ceux du produit fini et d'une taille suffisante pour satisfaire aux exigences de l'essai.
Elle ne s'applique pas à certaines peintures métallisées et à certains revêtements nacrés.

Pohištvo - Ugotavljanje sijaja površine

General Information

• Status: Published
• Publication Date: 20-Jul-2004
• Withdrawal Date: 30-Jan-2005
• ICS: 97.140 - Furniture
• Technical Committee: CEN/TC 207 - Furniture
• Drafting Committee: CEN/TC 207/WG 7 - Surfaces and surface finishes of furniture
• Current Stage: 9093 - Decision to confirm - Review Enquiry
• Completion Date: 04-Jun-2020
• Ref Project: SIST EN 13722:2004 - Furniture - Assessment of the surface gloss

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Pohištvo - Ugotavljanje sijaja površineMöbel - Bewertung des OberflächenglanzesMeubles - Évaluation de la brillance des surfacesFurniture - Assessment of the surface gloss97.140PohištvoFurnitureICS:Ta slovenski standard je istoveten z:EN 13722:2004SIST EN 13722:2004en,fr,de01-december-2004SIST EN 13722:2004SLOVENSKI
STANDARD



SIST EN 13722:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13722July 2004ICS 97.140English versionFurniture - Assessment of the surface glossMeubles - Evaluation de la brillance des surfacesMöbel - Bewertung des OberflächenglanzesThis European Standard was approved by CEN on 13 May 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13722:2004: ESIST EN 13722:2004



EN 13722:2004 (E) 2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Principle.5 5 Apparatus.5 6 Preparation and conditioning of test units.5 7 Calibration of glossmeter.5 8 Test Procedure.5 8.1 General.5 8.2 Textured and/or open grain surfaces.6 8.3 Other surfaces.6 8.4 Expression of results.6 9 Test report.8
SIST EN 13722:2004



EN 13722:2004 (E) 3 Foreword This document (EN 13722:2004) has been prepared by Technical Committee CEN/TC 207 “Furniture”, the secretariat of which is held by UNI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2005, and conflicting national standards shall be withdrawn at the latest by January 2005.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Icelan
...