EN ISO 20200:2023
(Main)Plastics - Determination of the degree of disintegration of plastic materials under composting conditions in a laboratory-scale test (ISO 20200:2023)
Plastics - Determination of the degree of disintegration of plastic materials under composting conditions in a laboratory-scale test (ISO 20200:2023)
This document specifies a method of determining the degree of disintegration of plastic materials when exposed to a laboratory-scale composting environment. The method is not applicable to the determination of the biodegradability of plastic materials under composting conditions. Further testing is necessary to be able to claim compostability.
Kunststoffe - Bestimmung des Zersetzungsgrades von Kunststoffmaterialien unter Kompostierungsbedingungen mittels einer Prüfung im Labormaßstab (ISO 20200:2023)
Dieses Dokument legt ein Verfahren zur Bestimmung des Zersetzungsgrades von Kunststoffmaterialien fest, die im Labormaßstab einer Kompostierungsumgebung ausgesetzt sind. Das Verfahren ist nicht anwendbar für die Bestimmung der biologischen Abbaubarkeit von Kunststoffen unter Kompostierbedingungen. Um die Kompostierbarkeit zu bescheinigen, ist weiteres Prüfen notwendig.
Plastiques - Détermination du degré de désintégration de matériaux plastiques dans des conditions de compostage lors d’un essai de laboratoire (ISO 20200:2023)
Le présent document spécifie une méthode de détermination du degré de désintégration de matériaux plastiques exposés à un environnement de compostage en laboratoire. La méthode ne s’applique pas à la détermination de la biodégradabilité des matériaux plastiques dans des conditions de compostage. D’autres essais seront nécessaires pour pouvoir revendiquer l’aptitude au compostage.
Polimerni materiali - Ugotavljanje razpada polimernih materialov pri kompostiranju v laboratorijskem merilu (ISO 20200:2023)
Ta dokument določa metodo za ugotavljanje razpada polimernih materialov pri kompostiranju v laboratorijskem merilu. Ta metoda se ne uporablja za ugotavljanje biorazgradljivosti polimernih materialov pri pogojih kompostiranja. Za dokazovanje možnosti kompostiranja so potrebni nadaljnji preskusi.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2023
Polimerni materiali - Ugotavljanje razpada polimernih materialov pri kompostiranju
v laboratorijskem merilu (ISO 20200:2023)
Plastics - Determination of the degree of disintegration of plastic materials under
composting conditions in a laboratory-scale test (ISO 20200:2023)
Kunststoffe - Bestimmung des Zersetzungsgrades von Kunststoffmaterialien unter
nachgebildeten Kompostierungsbedingungen mittels einer Prüfung im Labormaßstab
(ISO 20200:2023)
Plastiques - Détermination du degré de désintégration de matériaux plastiques dans des
conditions de compostage lors d’un essai de laboratoire (ISO 20200:2023)
Ta slovenski standard je istoveten z: EN ISO 20200:2023
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 20200
EUROPEAN STANDARD
NORME EUROPÉENNE
August 2023
EUROPÄISCHE NORM
ICS 83.080.01 Supersedes EN ISO 20200:2015
English Version
Plastics - Determination of the degree of disintegration of
plastic materials under composting conditions in a
laboratory-scale test (ISO 20200:2023)
Plastiques - Détermination du degré de désintégration Kunststoffe - Bestimmung des Zersetzungsgrades von
de matériaux plastiques dans des conditions de Kunststoffmaterialien unter nachgebildeten
compostage lors d'un essai de laboratoire (ISO Kompostierungsbedingungen mittels einer Prüfung im
20200:2023) Labormaßstab (ISO 20200:2023)
This European Standard was approved by CEN on 18 April 2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 20200:2023 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 20200:2023) has been prepared by Technical Committee ISO/TC 61 "Plastics"
in collaboration with Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2024, and conflicting national standards
shall be withdrawn at the latest by February 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 20200:2015.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 20200 has been approved by CEN as EN ISO 20200:2023 without any modification.
INTERNATIONAL ISO
STANDARD 20200
Third edition
2023-08
Plastics — Determination of the
degree of disintegration of plastic
materials under composting
conditions in a laboratory-scale test
Plastiques — Détermination du degré de désintégration de matériaux
plastiques dans des conditions de compostage lors d’un essai de
laboratoire
Reference number
ISO 20200:2023(E)
ISO 20200:2023(E)
© ISO 2023
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 20200:2023(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Synthetic solid waste . .2
6 Composting reactor . 3
7 Procedure .3
7.1 Test material preparation . 3
7.2 Start-up of the test . 4
7.3 Incubation . 4
7.3.1 General . 4
7.3.2 Type 1: constant thermophilic incubation . 4
7.3.3 Type 2: two-stages incubation . 5
7.3.4 Mesophilic incubation (optional) . 5
8 Monitoring the composting process . 5
9 Diagnostic parameters .5
9.1 Odour . . . 5
9.2 Visual appearance . 5
9.3 Chemical analysis . 6
9.4 Determination of dry mass and volatile solids . 6
10 Termination of the test and measurement of the degree of disintegration .6
11 Calculation of degree of disintegration . 6
12 Expression of results .7
13 Validity of the test .7
14 Test report . 7
Bibliography . 9
iii
ISO 20200:2023(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
ISO draws attention to the possibility that the implementation of this document may involve the use
of (a) patent(s). ISO takes no position concerning the evidence, validity or applicability of any claimed
patent rights in respect thereof. As of the date of publication of this document, ISO had not received
notice of (a) patent(s) which may be required to implement this document. However, implementers are
cautioned that this may not represent the latest information, which may be obtained from the patent
database available at www.iso.org/patents. ISO shall not be held responsible for identifying any or all
such patent rights.
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 61, Plastics, Subcommittee SC 14,
Environmental aspects, in collaboration with the European Committee for Standardization (CEN)
Technical Committee CEN/TC 249, Plastics, in accordance with the Agreement on technical cooperation
between ISO and CEN (Vienna Agreement).
This third edition cancels and replaces the second edition (ISO 20200:2015), which has been technically
revised.
The main changes
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.