prEN 15027
(Main)Transportable wall saw and wire saw equipment for job site - Safety
Transportable wall saw and wire saw equipment for job site - Safety
The global description "wall saw and wire saw equipment" contains two differing types of machines for use in the construction industry, and both used to make cuts on walls, ceilings and floors composed of mineral construction materials and/or composite materials. The many different cutting tasks and choice of operating method determine the type of machine to be used for each application.
The machines may therefore be split into the following two principal classifications:
- Wall saws - exclusively rail guided - transportable.
- Wire saws - transportable.
The machines are intended for the use of diamond tools. The types of cutting tools used in conjunction with the machines as described above fall within the design and use parameters supplied by the manufacturer.
Cutting debris generated by the cutting action is removed from the cutting joint by a medium such as water directed to the cutting tool.
Machines covered by this standard may be powered by: electric motor, IC engine, electro-hydraulic drive and IC engine-hydraulic drive.
This European Standard deals with all significant hazards, hazardous situations and events relevant to wall saws and wire saws machinery, when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This standard specifies the appropriate technical measures to eliminate or reduce risks arising from the significant hazards generated by the cutting process work cycle.
For special applications, for example, when working in potentially explosive atmospheres, additional safety requirements is necessary which are not covered by this standard.
This European Standard does not apply for wire saws intended for quarrying and stationary machining of natural stone as covered by prEN 15163.
This European Standard applies primarily to machines which are manufactured after the date of approval by CEN of this standard.
Transportable Wand- und Seilsägen für den Baustelleneinsatz - Sicherheit
Scies murales et scies à fil transportables de chantier - Sécurité
Oprema za prenosne stenske in žične žage za delovišča - Varnost
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 15027:2024
01-februar-2024
Oprema za prenosne stenske in žične žage za delovišča - Varnost
Transportable wall saw and wire saw equipment for job site - Safety
Transportable Wand- und Seilsägen für den Baustelleneinsatz - Sicherheit
Scies murales et scies à fil transportables de chantier - Sécurité
Ta slovenski standard je istoveten z: prEN 15027
ICS:
25.080.60 Strojne žage Sawing machines
91.220 Gradbena oprema Construction equipment
oSIST prEN 15027:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 15027:2024
---------------------- Page: 2 ----------------------
oSIST prEN 15027:2024
DRAFT
EUROPEAN STANDARD
prEN 15027
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2023
ICS Will supersede EN 15027:2007+A1:2009
English Version
Transportable wall saw and wire saw equipment for job
site - Safety
Scies murales et scies à fil transportables de chantier - Transportable Wand- und Seilsägen für den
Sécurité Baustelleneinsatz - Sicherheit
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 151.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 15027:2023 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
oSIST prEN 15027:2024
FprEN 15027:2022 (E)
Contents Page
European Foreword . 5
Introduction . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 9
4 Safety requirements and/or measures . 13
4.1 General . 13
4.2 Mechanical hazard . 13
4.2.1 General . 13
4.2.2 Protection against moving parts . 13
4.2.3 Stability . 14
4.2.4 Transport and handling .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.